iOS常见加密算法总结
2018-08-17 本文已影响1人
学生陈希
1. 安全散列算法
将任意长度的二进制值映射为较短的固定长度的二进制值，这个短的二进制值称为哈希值，这个算法具有不可逆、碰撞低等特性。同时该类算法可以用作数字签名，用来证实某个信息确实是由某个人发出的，同时可以保证信息没有被修改。
实际上，简单来说，这种算法有两个特性：
A) 不同的输入一定得出不同的 hash 值；
B) 无法从 hash 值倒推出原来的输入。
2. 对称加密
对称加密指的是可以使用同一个密钥对内容进行加密和解密，相比非对称加密，它的特点是加/解密速度快，并且加密的内容长度几乎没有限制。
3. 非对称加密
asymmetric/public-key encryption，常见的加密算法有 RSA、DSA、ECC 等。
非对称加密有两个密钥，分别为公钥和私钥，其中公钥公开给所有人，私钥永远只能自己知道。
使用公钥加密的信息只能使用私钥解密，使用私钥加密只能使用公钥解密。前者用来传输需要保密的信息，因为全世界只有知道对应私钥的人才可以解密；后者用来作数字签名，因为公钥对所有人公开的，可以用来确认这个信息是否是从私钥的拥有者发出的。
<a name="Secure-Hash-Algorithm"></a>安全散列算法
<a name="md5"></a>MD5信息摘要
MD5 Message-Digest Algorithm，一种被广泛使用的密码散列函数，可以产生出一个128位（16字节）的散列值（hash value），用于确保信息传输完整一致。
MD5由美国密码学家罗纳德·李维斯特（Ronald Linn Rivest）设计，于1992年公开，用以取代MD4算法。
将数据（如一段文字）运算变为另一固定长度值，是散列算法的基础原理。
1996年后被证实存在弱点，可以被加以破解，对于需要高度安全性的数据，专家一般建议改用其他算法，如SHA-2。2004年，证实MD5算法无法防止碰撞（collision），因此不适用于安全性认证，如SSL公开密钥认证或是数字签名等用途。
#include <CommonCrypto/CommonCrypto.h>
@implementation NSData (Add)
- (NSString *)md5String {
unsigned char result[CC_MD5_DIGEST_LENGTH];
CC_MD5(self.bytes, (CC_LONG)self.length, result);
NSMutableString *hash = [NSMutableString string];
for (int i = 0; i < CC_MD5_DIGEST_LENGTH; i++) {
[hash appendFormat:@"%02x", result[i]];
}
return hash;
}
@end
<a name="SHA"></a>SHA家族
安全散列算法（英语：Secure Hash Algorithm，缩写为SHA）是一个密码散列函数家族，是FIPS所认证的安全散列算法。
能计算出一个数字消息所对应到的，长度固定的字符串（又称消息摘要）的算法。且若输入的消息不同，它们对应到不同字符串的机率很高。
SHA家族的算法，由美国国家安全局（NSA）所设计，并由美国国家标准与技术研究院（NIST）发布，是美国的政府标准，其分别是：
SHA-0：1993年发布，当时称做安全散列标准（Secure Hash Standard），发布之后很快就被NSA撤回，是SHA-1的前身。
SHA-1：1995年发布，SHA-1在许多安全协议中广为使用，包括TLS和SSL、PGP、SSH、S/MIME和IPsec，曾被视为是MD5（更早之前被广为使用的散列函数）的后继者。但SHA-1的安全性在2000年以后已经不被大多数的加密场景所接受。
2017年荷兰密码学研究小组CWI和Google正式宣布攻破了SHA-1。
SHA-2：2001年发布，包括SHA-224、SHA-256、SHA-384、SHA-512、SHA-512/224、SHA-512/256。
虽然至今尚未出现对SHA-2有效的攻击，它的算法跟SHA-1基本上仍然相似；因此有些人开始发展其他替代的散列算法。
SHA-3：2015年正式发布，SHA-3并不是要取代SHA-2，因为SHA-2目前并没有出现明显的弱点。
由于对MD5出现成功的破解，以及对SHA-0和SHA-1出现理论上破解的方法，NIST感觉需要一个与之前算法不同的，可替换的加密散列算法，也就是现在的SHA-3。
#include <CommonCrypto/CommonCrypto.h>
@implementation NSData (Add)
- (NSString *)sha1String {
unsigned char result[CC_SHA1_DIGEST_LENGTH];
CC_SHA1(self.bytes, (CC_LONG)self.length, result);
NSMutableString *hash = [NSMutableString stringWithCapacity:CC_SHA1_DIGEST_LENGTH * 2];
for (int i = 0; i < CC_SHA1_DIGEST_LENGTH; i++) {
[hash appendFormat:@"%02x", result[i]];
}
return hash;
}
- (NSString *)sha224String {
unsigned char result[CC_SHA224_DIGEST_LENGTH];
CC_SHA224(self.bytes, (CC_LONG)self.length, result);
NSMutableString *hash = [NSMutableString
stringWithCapacity:CC_SHA224_DIGEST_LENGTH * 2];
for (int i = 0; i < CC_SHA224_DIGEST_LENGTH; i++) {
[hash appendFormat:@"%02x", result[i]];
}
return hash;
}
- (NSString *)sha256String {
unsigned char result[CC_SHA256_DIGEST_LENGTH];
CC_SHA256(self.bytes, (CC_LONG)self.length, result);
NSMutableString *hash = [NSMutableString
stringWithCapacity:CC_SHA256_DIGEST_LENGTH * 2];
for (int i = 0; i < CC_SHA256_DIGEST_LENGTH; i++) {
[hash appendFormat:@"%02x", result[i]];
}
return hash;
}
- (NSString *)sha384String {
unsigned char result[CC_SHA384_DIGEST_LENGTH];
CC_SHA384(self.bytes, (CC_LONG)self.length, result);
NSMutableString *hash = [NSMutableString
stringWithCapacity:CC_SHA384_DIGEST_LENGTH * 2];
for (int i = 0; i < CC_SHA384_DIGEST_LENGTH; i++) {
[hash appendFormat:@"%02x", result[i]];
}
return hash;
}
- (NSString *)sha512String {
unsigned char result[CC_SHA512_DIGEST_LENGTH];
CC_SHA512(self.bytes, (CC_LONG)self.length, result);
NSMutableString *hash = [NSMutableString
stringWithCapacity:CC_SHA512_DIGEST_LENGTH * 2];
for (int i = 0; i < CC_SHA512_DIGEST_LENGTH; i++) {
[hash appendFormat:@"%02x", result[i]];
}
return hash;
}
@end
<a name="HMAC"></a>HMAC
HMAC加密算法是一种安全的基于加密hash函数和共享密钥的消息认证协议． 它可以有效地防止数据在传输过程中被截获和篡改，维护了数据的完整性、可靠性和安全性. HMAC加密算法是一种基于密钥的报文完整性的验证方法，其安全性是建立在Hash加密算法基础上的
#include <CommonCrypto/CommonCrypto.h>
@implementation NSData (Add)
- (NSString *)hmacStringUsingAlg:(CCHmacAlgorithm)alg withKey:(NSString *)key {
size_t size;
switch (alg) {
case kCCHmacAlgMD5: size = CC_MD5_DIGEST_LENGTH; break;
case kCCHmacAlgSHA1: size = CC_SHA1_DIGEST_LENGTH; break;
case kCCHmacAlgSHA224: size = CC_SHA224_DIGEST_LENGTH; break;
case kCCHmacAlgSHA256: size = CC_SHA256_DIGEST_LENGTH; break;
case kCCHmacAlgSHA384: size = CC_SHA384_DIGEST_LENGTH; break;
case kCCHmacAlgSHA512: size = CC_SHA512_DIGEST_LENGTH; break;
default: return nil;
}
unsigned char result[size];
const char *cKey = [key cStringUsingEncoding:NSUTF8StringEncoding];
CCHmac(alg, cKey, strlen(cKey), self.bytes, self.length, result);
NSMutableString *hash = [NSMutableString stringWithCapacity:size * 2];
for (int i = 0; i < size; i++) {
[hash appendFormat:@"%02x", result[i]];
}
return hash;
}
- (NSString *)hmacMD5StringWithKey:(NSString *)key {
return [self hmacStringUsingAlg:kCCHmacAlgMD5 withKey:key];
}
- (NSString *)hmacSHA1StringWithKey:(NSString *)key {
return [self hmacStringUsingAlg:kCCHmacAlgSHA1 withKey:key];
}
- (NSString *)hmacSHA224StringWithKey:(NSString *)key {
return [self hmacStringUsingAlg:kCCHmacAlgSHA224 withKey:key];
}
- (NSString *)hmacSHA256StringWithKey:(NSString *)key {
return [self hmacStringUsingAlg:kCCHmacAlgSHA256 withKey:key];
}
- (NSString *)hmacSHA384StringWithKey:(NSString *)key {
return [self hmacStringUsingAlg:kCCHmacAlgSHA384 withKey:key];
}
- (NSString *)hmacSHA512StringWithKey:(NSString *)key {
return [self hmacStringUsingAlg:kCCHmacAlgSHA512 withKey:key];
}
@end
<a name="symmetric-key-encryption"></a>对称加密
<a name="AES"></a>AES
AES256是美国NIST在几种加密算法竞赛中选出来的对称加密算法，是用于取代DES的，原名为Rijndael加密法，破解的报道相对少些。
如果单纯从密码学上讲，要实现与AES256相当的加密强度，RSA加密算法长度要达到16384位，另外RSA1024目前已经不被认为是安全的加密算法了。
#include <CommonCrypto/CommonCrypto.h>
@implementation NSData (Add)
- (NSData *)AES256EncryptWithKey:(NSData *)key iv:(NSData *)iv {
if (key.length != 16 && key.length != 24 && key.length != 32) return nil;
if (iv.length != 16 && iv.length != 0) return nil;
NSData *result = nil;
size_t bufferSize = self.length + kCCBlockSizeAES128;
void *buffer = malloc(bufferSize);
if (!buffer) return nil;
size_t encryptedSize = 0;
CCCryptorStatus cryptStatus = CCCrypt(kCCEncrypt,
kCCAlgorithmAES,
kCCOptionPKCS7Padding,
key.bytes,
key.length,
iv.bytes,
self.bytes,
self.length,
buffer,
bufferSize,
&encryptedSize);
if (cryptStatus == kCCSuccess) {
result = [[NSData alloc] initWithBytes:buffer length:(NSUInteger)encryptedSize];
free(buffer);
return result;
} else {
free(buffer);
return nil;
}
}
- (NSData *)AES256DecryptWithKey:(NSData *)key iv:(NSData *)iv {
if (key.length != 16 && key.length != 24 && key.length != 32) return nil;
if (iv.length != 16 && iv.length != 0) return nil;
NSData *result = nil;
size_t bufferSize = self.length + kCCBlockSizeAES128;
void *buffer = malloc(bufferSize);
if (!buffer) return nil;
size_t encryptedSize = 0;
CCCryptorStatus cryptStatus = CCCrypt(kCCDecrypt,
kCCAlgorithmAES,
kCCOptionPKCS7Padding,
key.bytes,
key.length,
iv.bytes,
self.bytes,
self.length,
buffer,
bufferSize,
&encryptedSize);
if (cryptStatus == kCCSuccess) {
result = [[NSData alloc] initWithBytes:buffer length:(NSUInteger)encryptedSize];
free(buffer);
return result;
} else {
free(buffer);
return nil;
}
}
@end
参考：
RSA 1024和AES 256，这两种加密算法理论上哪种更安全？
<a name="RC4"></a>RC4
Rivest Cipher 4是一种流加密算法，密钥长度可变。它加解密使用相同的密钥，因此也属于对称加密算法。
#ifndef CX_SWAP // swap two value
#define CX_SWAP(_a_, _b_) do {__typeof__(_a_) _tmp_ = (_a_); (_a_) = (_b_); (_b_) = (_tmp_); } while(0)
#endif
@implementation NSString (CX)
- (NSString *)rc4WithKey:(NSString *)key {
int j = 0;
unichar res[self.length];
const unichar *buffer = res;
unsigned char s[256];
for (int i = 0; i < 256; i++) {
s[i] = i;
}
for (int i = 0; i < 256; i++) {
j = (j + s[i] + [key characterAtIndex:(i%key.length)])%256;
CX_SWAP(s[i], s[j]);
}
int i = j = 0;
for (int y = 0; y < self.length; y++) {
i = (i + 1) % 256;
j = (j + 1) % 256;
CX_SWAP(s[i], s[j]);
unsigned char f = [self characterAtIndex:y] ^ s[ (s[i] + s[j]) % 256 ];
res[y] = f;
}
return [NSString stringWithCharacters:buffer length:self.length];
}
@end
<a name="asymmetric-public-key-encryption"></a>非对称加密
<a name="RSA"></a>RSA
以下代码参考自 Objective-C-RSA
@interface RSA : NSObject
// return base64 encoded string
+ (NSString *)encryptString:(NSString *)str publicKey:(NSString *)pubKey;
// return raw data
+ (NSData *)encryptData:(NSData *)data publicKey:(NSString *)pubKey;
// return base64 encoded string
+ (NSString *)encryptString:(NSString *)str privateKey:(NSString *)privKey;
// return raw data
+ (NSData *)encryptData:(NSData *)data privateKey:(NSString *)privKey;
// decrypt base64 encoded string, convert result to string(not base64 encoded)
+ (NSString *)decryptString:(NSString *)str publicKey:(NSString *)pubKey;
+ (NSData *)decryptData:(NSData *)data publicKey:(NSString *)pubKey;
+ (NSString *)decryptString:(NSString *)str privateKey:(NSString *)privKey;
+ (NSData *)decryptData:(NSData *)data privateKey:(NSString *)privKey;
@end
#import "RSA.h"
#import <Security/Security.h>
@implementation RSA
static NSString *base64_encode_data(NSData *data){
data = [data base64EncodedDataWithOptions:0];
NSString *ret = [[NSString alloc] initWithData:data encoding:NSUTF8StringEncoding];
return ret;
}
static NSData *base64_decode(NSString *str){
NSData *data = [[NSData alloc] initWithBase64EncodedString:str options:NSDataBase64DecodingIgnoreUnknownCharacters];
return data;
}
+ (NSData *)stripPublicKeyHeader:(NSData *)d_key{
// Skip ASN.1 public key header
if (d_key == nil) return(nil);
unsigned long len = [d_key length];
if (!len) return(nil);
unsigned char *c_key = (unsigned char *)[d_key bytes];
unsigned int idx = 0;
if (c_key[idx++] != 0x30) return(nil);
if (c_key[idx] > 0x80) idx += c_key[idx] - 0x80 + 1;
else idx++;
// PKCS #1 rsaEncryption szOID_RSA_RSA
static unsigned char seqiod[] =
{ 0x30, 0x0d, 0x06, 0x09, 0x2a, 0x86, 0x48, 0x86, 0xf7, 0x0d, 0x01, 0x01,
0x01, 0x05, 0x00 };
if (memcmp(&c_key[idx], seqiod, 15)) return(nil);
idx += 15;
if (c_key[idx++] != 0x03) return(nil);
if (c_key[idx] > 0x80) idx += c_key[idx] - 0x80 + 1;
else idx++;
if (c_key[idx++] != '\0') return(nil);
// Now make a new NSData from this buffer
return([NSData dataWithBytes:&c_key[idx] length:len - idx]);
}
//credit: http://hg.mozilla.org/services/fx-home/file/tip/Sources/NetworkAndStorage/CryptoUtils.m#l1036
+ (NSData *)stripPrivateKeyHeader:(NSData *)d_key{
// Skip ASN.1 private key header
if (d_key == nil) return(nil);
unsigned long len = [d_key length];
if (!len) return(nil);
unsigned char *c_key = (unsigned char *)[d_key bytes];
unsigned int idx = 22; //magic byte at offset 22
if (0x04 != c_key[idx++]) return nil;
//calculate length of the key
unsigned int c_len = c_key[idx++];
int det = c_len & 0x80;
if (!det) {
c_len = c_len & 0x7f;
} else {
int byteCount = c_len & 0x7f;
if (byteCount + idx > len) {
//rsa length field longer than buffer
return nil;
}
unsigned int accum = 0;
unsigned char *ptr = &c_key[idx];
idx += byteCount;
while (byteCount) {
accum = (accum << 8) + *ptr;
ptr++;
byteCount--;
}
c_len = accum;
}
// Now make a new NSData from this buffer
return [d_key subdataWithRange:NSMakeRange(idx, c_len)];
}
+ (SecKeyRef)addPublicKey:(NSString *)key{
NSRange spos = [key rangeOfString:@"-----BEGIN PUBLIC KEY-----"];
NSRange epos = [key rangeOfString:@"-----END PUBLIC KEY-----"];
if(spos.location != NSNotFound && epos.location != NSNotFound){
NSUInteger s = spos.location + spos.length;
NSUInteger e = epos.location;
NSRange range = NSMakeRange(s, e-s);
key = [key substringWithRange:range];
}
key = [key stringByReplacingOccurrencesOfString:@"\r" withString:@""];
key = [key stringByReplacingOccurrencesOfString:@"\n" withString:@""];
key = [key stringByReplacingOccurrencesOfString:@"\t" withString:@""];
key = [key stringByReplacingOccurrencesOfString:@" " withString:@""];
// This will be base64 encoded, decode it.
NSData *data = base64_decode(key);
data = [RSA stripPublicKeyHeader:data];
if(!data){
return nil;
}
//a tag to read/write keychain storage
NSString *tag = @"RSAUtil_PubKey";
NSData *d_tag = [NSData dataWithBytes:[tag UTF8String] length:[tag length]];
// Delete any old lingering key with the same tag
NSMutableDictionary *publicKey = [[NSMutableDictionary alloc] init];
[publicKey setObject:(__bridge id) kSecClassKey forKey:(__bridge id)kSecClass];
[publicKey setObject:(__bridge id) kSecAttrKeyTypeRSA forKey:(__bridge id)kSecAttrKeyType];
[publicKey setObject:d_tag forKey:(__bridge id)kSecAttrApplicationTag];
SecItemDelete((__bridge CFDictionaryRef)publicKey);
// Add persistent version of the key to system keychain
[publicKey setObject:data forKey:(__bridge id)kSecValueData];
[publicKey setObject:(__bridge id) kSecAttrKeyClassPublic forKey:(__bridge id)
kSecAttrKeyClass];
[publicKey setObject:[NSNumber numberWithBool:YES] forKey:(__bridge id)
kSecReturnPersistentRef];
CFTypeRef persistKey = nil;
OSStatus status = SecItemAdd((__bridge CFDictionaryRef)publicKey, &persistKey);
if (persistKey != nil){
CFRelease(persistKey);
}
if ((status != noErr) && (status != errSecDuplicateItem)) {
return nil;
}
[publicKey removeObjectForKey:(__bridge id)kSecValueData];
[publicKey removeObjectForKey:(__bridge id)kSecReturnPersistentRef];
[publicKey setObject:[NSNumber numberWithBool:YES] forKey:(__bridge id)kSecReturnRef];
[publicKey setObject:(__bridge id) kSecAttrKeyTypeRSA forKey:(__bridge id)kSecAttrKeyType];
// Now fetch the SecKeyRef version of the key
SecKeyRef keyRef = nil;
status = SecItemCopyMatching((__bridge CFDictionaryRef)publicKey, (CFTypeRef *)&keyRef);
if(status != noErr){
return nil;
}
return keyRef;
}
+ (SecKeyRef)addPrivateKey:(NSString *)key{
NSRange spos;
NSRange epos;
spos = [key rangeOfString:@"-----BEGIN RSA PRIVATE KEY-----"];
if(spos.length > 0){
epos = [key rangeOfString:@"-----END RSA PRIVATE KEY-----"];
}else{
spos = [key rangeOfString:@"-----BEGIN PRIVATE KEY-----"];
epos = [key rangeOfString:@"-----END PRIVATE KEY-----"];
}
if(spos.location != NSNotFound && epos.location != NSNotFound){
NSUInteger s = spos.location + spos.length;
NSUInteger e = epos.location;
NSRange range = NSMakeRange(s, e-s);
key = [key substringWithRange:range];
}
key = [key stringByReplacingOccurrencesOfString:@"\r" withString:@""];
key = [key stringByReplacingOccurrencesOfString:@"\n" withString:@""];
key = [key stringByReplacingOccurrencesOfString:@"\t" withString:@""];
key = [key stringByReplacingOccurrencesOfString:@" " withString:@""];
// This will be base64 encoded, decode it.
NSData *data = base64_decode(key);
data = [RSA stripPrivateKeyHeader:data];
if(!data){
return nil;
}
//a tag to read/write keychain storage
NSString *tag = @"RSAUtil_PrivKey";
NSData *d_tag = [NSData dataWithBytes:[tag UTF8String] length:[tag length]];
// Delete any old lingering key with the same tag
NSMutableDictionary *privateKey = [[NSMutableDictionary alloc] init];
[privateKey setObject:(__bridge id) kSecClassKey forKey:(__bridge id)kSecClass];
[privateKey setObject:(__bridge id) kSecAttrKeyTypeRSA forKey:(__bridge id)kSecAttrKeyType];
[privateKey setObject:d_tag forKey:(__bridge id)kSecAttrApplicationTag];
SecItemDelete((__bridge CFDictionaryRef)privateKey);
// Add persistent version of the key to system keychain
[privateKey setObject:data forKey:(__bridge id)kSecValueData];
[privateKey setObject:(__bridge id) kSecAttrKeyClassPrivate forKey:(__bridge id)
kSecAttrKeyClass];
[privateKey setObject:[NSNumber numberWithBool:YES] forKey:(__bridge id)
kSecReturnPersistentRef];
CFTypeRef persistKey = nil;
OSStatus status = SecItemAdd((__bridge CFDictionaryRef)privateKey, &persistKey);
if (persistKey != nil){
CFRelease(persistKey);
}
if ((status != noErr) && (status != errSecDuplicateItem)) {
return nil;
}
[privateKey removeObjectForKey:(__bridge id)kSecValueData];
[privateKey removeObjectForKey:(__bridge id)kSecReturnPersistentRef];
[privateKey setObject:[NSNumber numberWithBool:YES] forKey:(__bridge id)kSecReturnRef];
[privateKey setObject:(__bridge id) kSecAttrKeyTypeRSA forKey:(__bridge id)kSecAttrKeyType];
// Now fetch the SecKeyRef version of the key
SecKeyRef keyRef = nil;
status = SecItemCopyMatching((__bridge CFDictionaryRef)privateKey, (CFTypeRef *)&keyRef);
if(status != noErr){
return nil;
}
return keyRef;
}
/* START: Encryption & Decryption with RSA private key */
+ (NSData *)encryptData:(NSData *)data withKeyRef:(SecKeyRef) keyRef isSign:(BOOL)isSign {
const uint8_t *srcbuf = (const uint8_t *)[data bytes];
size_t srclen = (size_t)data.length;
size_t block_size = SecKeyGetBlockSize(keyRef) * sizeof(uint8_t);
void *outbuf = malloc(block_size);
size_t src_block_size = block_size - 11;
NSMutableData *ret = [[NSMutableData alloc] init];
for(int idx=0; idx<srclen; idx+=src_block_size){
//NSLog(@"%d/%d block_size: %d", idx, (int)srclen, (int)block_size);
size_t data_len = srclen - idx;
if(data_len > src_block_size){
data_len = src_block_size;
}
size_t outlen = block_size;
OSStatus status = noErr;
if (isSign) {
status = SecKeyRawSign(keyRef,
kSecPaddingPKCS1,
srcbuf + idx,
data_len,
outbuf,
&outlen
);
} else {
status = SecKeyEncrypt(keyRef,
kSecPaddingPKCS1,
srcbuf + idx,
data_len,
outbuf,
&outlen
);
}
if (status != 0) {
NSLog(@"SecKeyEncrypt fail. Error Code: %d", status);
ret = nil;
break;
}else{
[ret appendBytes:outbuf length:outlen];
}
}
free(outbuf);
CFRelease(keyRef);
return ret;
}
+ (NSString *)encryptString:(NSString *)str privateKey:(NSString *)privKey{
NSData *data = [RSA encryptData:[str dataUsingEncoding:NSUTF8StringEncoding] privateKey:privKey];
NSString *ret = base64_encode_data(data);
return ret;
}
+ (NSData *)encryptData:(NSData *)data privateKey:(NSString *)privKey{
if(!data || !privKey){
return nil;
}
SecKeyRef keyRef = [RSA addPrivateKey:privKey];
if(!keyRef){
return nil;
}
return [RSA encryptData:data withKeyRef:keyRef isSign:YES];
}
+ (NSData *)decryptData:(NSData *)data withKeyRef:(SecKeyRef) keyRef{
const uint8_t *srcbuf = (const uint8_t *)[data bytes];
size_t srclen = (size_t)data.length;
size_t block_size = SecKeyGetBlockSize(keyRef) * sizeof(uint8_t);
UInt8 *outbuf = malloc(block_size);
size_t src_block_size = block_size;
NSMutableData *ret = [[NSMutableData alloc] init];
for(int idx=0; idx<srclen; idx+=src_block_size){
//NSLog(@"%d/%d block_size: %d", idx, (int)srclen, (int)block_size);
size_t data_len = srclen - idx;
if(data_len > src_block_size){
data_len = src_block_size;
}
size_t outlen = block_size;
OSStatus status = noErr;
status = SecKeyDecrypt(keyRef,
kSecPaddingNone,
srcbuf + idx,
data_len,
outbuf,
&outlen
);
if (status != 0) {
NSLog(@"SecKeyEncrypt fail. Error Code: %d", status);
ret = nil;
break;
}else{
//the actual decrypted data is in the middle, locate it!
int idxFirstZero = -1;
int idxNextZero = (int)outlen;
for ( int i = 0; i < outlen; i++ ) {
if ( outbuf[i] == 0 ) {
if ( idxFirstZero < 0 ) {
idxFirstZero = i;
} else {
idxNextZero = i;
break;
}
}
}
[ret appendBytes:&outbuf[idxFirstZero+1] length:idxNextZero-idxFirstZero-1];
}
}
free(outbuf);
CFRelease(keyRef);
return ret;
}
+ (NSString *)decryptString:(NSString *)str privateKey:(NSString *)privKey{
NSData *data = [[NSData alloc] initWithBase64EncodedString:str options:NSDataBase64DecodingIgnoreUnknownCharacters];
data = [RSA decryptData:data privateKey:privKey];
NSString *ret = [[NSString alloc] initWithData:data encoding:NSUTF8StringEncoding];
return ret;
}
+ (NSData *)decryptData:(NSData *)data privateKey:(NSString *)privKey{
if(!data || !privKey){
return nil;
}
SecKeyRef keyRef = [RSA addPrivateKey:privKey];
if(!keyRef){
return nil;
}
return [RSA decryptData:data withKeyRef:keyRef];
}
/* END: Encryption & Decryption with RSA private key */
/* START: Encryption & Decryption with RSA public key */
+ (NSString *)encryptString:(NSString *)str publicKey:(NSString *)pubKey{
NSData *data = [RSA encryptData:[str dataUsingEncoding:NSUTF8StringEncoding] publicKey:pubKey];
NSString *ret = base64_encode_data(data);
return ret;
}
+ (NSData *)encryptData:(NSData *)data publicKey:(NSString *)pubKey{
if(!data || !pubKey){
return nil;
}
SecKeyRef keyRef = [RSA addPublicKey:pubKey];
if(!keyRef){
return nil;
}
return [RSA encryptData:data withKeyRef:keyRef isSign:NO];
}
+ (NSString *)decryptString:(NSString *)str publicKey:(NSString *)pubKey{
NSData *data = [[NSData alloc] initWithBase64EncodedString:str options:NSDataBase64DecodingIgnoreUnknownCharacters];
data = [RSA decryptData:data publicKey:pubKey];
NSString *ret = [[NSString alloc] initWithData:data encoding:NSUTF8StringEncoding];
return ret;
}
+ (NSData *)decryptData:(NSData *)data publicKey:(NSString *)pubKey{
if(!data || !pubKey){
return nil;
}
SecKeyRef keyRef = [RSA addPublicKey:pubKey];
if(!keyRef){
return nil;
}
return [RSA decryptData:data withKeyRef:keyRef];
}
/* END: Encryption & Decryption with RSA public key */
参考：
其他
CRC
CRC即循环冗余校验码（Cyclic Redundancy Check [1] ）：是数据通信领域中最常用的一种查错校验码，其特征是信息字段和校验字段的长度可以任意选定。
循环冗余检查（CRC）是一种数据传输检错功能，对数据进行多项式计算，并将得到的结果附在帧的后面，接收设备也执行类似的算法，以保证数据传输的正确性和完整性。
#import <zlib.h>
ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
/*
Update a running CRC-32 with the bytes buf[0..len-1] and return the
updated CRC-32. If buf is Z_NULL, this function returns the required
initial value for the crc. Pre- and post-conditioning (one's complement) is
performed within this function so it shouldn't be done by the application.
Usage example:
uLong crc = crc32(0L, Z_NULL, 0);
while (read_buffer(buffer, length) != EOF) {
crc = crc32(crc, buffer, length);
}
if (crc != original_crc) error();
*/
参考
