HyperLedger Fabric 单机多节点示例

2018-07-27 本文已影响517人 SlowGO

目标

实践一个简化版本的 fabric 1.1 网络，在一台服务器中部署完成，并执行 chaincode。

包括：

1个orderer 节点
2个组织，每个组织1个peer节点
chaincode 使用 fabric-release-1.1 中的 examples/chaincode/go/chaincode_example02

实践本示例最好先把 fabric 基础跑通，可以参考之前的文章：
HyperLedger Fabric 1.1 End-2-End 示例

思路

生成基础文件，如权限、创始块相关文件
部署 orderer 服务
部署一个 peer 服务，在这个 peer 上安装 chaincode，执行测试操作，这时，一个最小化的 fabric 网络就完成了
部署其他 peer 服务，加入到现有网络中，并在其中执行 chaincode 进行测试

步骤说明

写配置文件生成权限文件、创始块
写orderer配置文件启动
写org1的peer配置文件启动
安装执行 chaincode
写org2的peer配置文件启动执行chaincode
org2的peer中执行chaincode

详细步骤

（1）写配置文件生成权限文件、创始块

创建测试项目目录 fabrictest，并把 chaincode_example02 拷贝到 fabrictest/chaincode/go 目录下。

写配置文件 fabrictest/crypto-config.yaml，内容：

OrdererOrgs:
  - Name: Orderer
    Domain: example.com
    Specs:
      - Hostname: orderer
PeerOrgs:
  - Name: Org1
    Domain: org1.example.com
    Template:
      Count: 1
    Users:
      Count: 1
  - Name: Org2
    Domain: org2.example.com
    Template:
      Count: 1
    Users:
      Count: 1

执行命令生成安全文件：

cryptogen generate --config=./crypto-config.yaml

# 返回信息
org1.example.com
org2.example.com

会自动生成一个文件夹 crypto-config，里面是各个组织的安全文件，现在项目的目录结构如下：

├── chaincode
│   └── go
│       └── chaincode_example02
│           ├── chaincode_example02.go
│           └── chaincode_example02_test.go
├── crypto-config.yaml
├── crypto-config
│   ├── ordererOrganizations
│   │   └── example.com
│   │       ├── ca
│   │       ├── msp
│   │       ├── orderers
│   │       ├── tlsca
│   │       └── users
│   └── peerOrganizations
│       ├── org1.example.com
│       │   ├── ca
│       │   ├── msp
│       │   ├── peers
│       │   ├── tlsca
│       │   └── users
│       └── org2.example.com
│           ├── ca
│           ├── msp
│           ├── peers
│           ├── tlsca
│           └── users

编写文件 fabrictest/configtx.yaml，内容：

Profiles:
    TwoOrgsOrdererGenesis:
        Orderer:
            <<: *OrdererDefaults
            Organizations:
                - *OrdererOrg
        Consortiums:
            SampleConsortium:
                Organizations:
                    - *Org1
                    - *Org2
    TwoOrgsChannel:
        Consortium: SampleConsortium
        Application:
            <<: *ApplicationDefaults
            Organizations:
                - *Org1
                - *Org2
Organizations:
    - &OrdererOrg
        Name: OrdererOrg
        ID: OrdererMSP
        MSPDir: crypto-config/ordererOrganizations/example.com/msp
    - &Org1
        Name: Org1MSP
        ID: Org1MSP
        MSPDir: crypto-config/peerOrganizations/org1.example.com/msp
        AnchorPeers:
            - Host: peer0.org1.example.com
              Port: 7051
    - &Org2
        Name: Org2MSP
        ID: Org2MSP
        MSPDir: crypto-config/peerOrganizations/org2.example.com/msp
        AnchorPeers:
            - Host: peer0.org2.example.com
              Port: 7051
Orderer: &OrdererDefaults
    OrdererType: solo
    Addresses:
        - orderer.example.com:7050
    BatchTimeout: 2s
    BatchSize:
        MaxMessageCount: 10
        AbsoluteMaxBytes: 98 MB
        PreferredMaxBytes: 512 KB
    Kafka:
        Brokers:
            - 127.0.0.1:9092
    Organizations:
Application: &ApplicationDefaults
    Organizations:

执行命令，生成创始块和频道认证文件：

mkdir channel-artifacts

configtxgen -profile TwoOrgsOrdererGenesis -outputBlock ./channel-artifacts/genesis.block

configtxgen -profile TwoOrgsChannel -outputCreateChannelTx ./channel-artifacts/mychannel.tx -channelID mychannel

目录结构：

├── chaincode
│   └── go
├── channel-artifacts
│   ├── genesis.block
│   └── mychannel.tx
├── configtx.yaml
├── crypto-config
│   ├── ordererOrganizations
│   └── peerOrganizations
└── crypto-config.yaml

（2）写orderer配置文件启动

编写 docker-orderer.yaml，内容：

version: '2'
services:
  orderer.example.com:
    container_name: orderer.example.com
    image: hyperledger/fabric-orderer
    environment:
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=fabrictest_default
      - ORDERER_GENERAL_LOGLEVEL=debug
      - ORDERER_GENERAL_LISTENADDRESS=0.0.0.0
      - ORDERER_GENERAL_LISTENPORT=7050
      - ORDERER_GENERAL_GENESISMETHOD=file
      - ORDERER_GENERAL_GENESISFILE=/var/hyperledger/orderer/orderer.genesis.block
      - ORDERER_GENERAL_LOCALMSPID=OrdererMSP
      - ORDERER_GENERAL_LOCALMSPDIR=/var/hyperledger/orderer/msp
      - ORDERER_GENERAL_TLS_ENABLED=false
      - ORDERER_GENERAL_TLS_PRIVATEKEY=/var/hyperledger/orderer/tls/server.key
      - ORDERER_GENERAL_TLS_CERTIFICATE=/var/hyperledger/orderer/tls/server.crt
      - ORDERER_GENERAL_TLS_ROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric
    command: orderer
    volumes:
    - ./channel-artifacts/genesis.block:/var/hyperledger/orderer/orderer.genesis.block
    - ./crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/msp:/var/hyperledger/orderer/msp
    - ./crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls/:/var/hyperledger/orderer/tls
    networks:
      default:
        aliases:
          - aberic
    ports:
      - 7050:7050

启动：

docker-compose -f docker-orderer.yaml up -d

检查：

docker ps --format 'table {{.Names}}\t{{.Ports}}\t{{.Status}}'
NAMES                 PORTS                    STATUS
orderer.example.com   0.0.0.0:7050->7050/tcp   Up 57 seconds

（3）写org1的peer配置文件启动

编写 docker-peer01.yaml，内容：

version: '2'
services:
  couchdb:
    container_name: couchdb
    image: hyperledger/fabric-couchdb
    ports:
      - "5984:5984"
  ca:
    container_name: ca
    image: hyperledger/fabric-ca
    environment:
      - FABRIC_CA_HOME=/etc/hyperledger/fabric-ca-server
      - FABRIC_CA_SERVER_CA_NAME=ca
      - FABRIC_CA_SERVER_TLS_ENABLED=false
      - FABRIC_CA_SERVER_TLS_CERTFILE=/etc/hyperledger/fabric-ca-server-config/ca.org1.example.com-cert.pem
      - FABRIC_CA_SERVER_TLS_KEYFILE=/etc/hyperledger/fabric-ca-server-config/ab7dca5e5f6b1cc24c2023764c5b34d1f78d8614d2a11e74178d2d5509bd3be8_sk
    ports:
      - "7054:7054"
    command: sh -c 'fabric-ca-server start --ca.certfile /etc/hyperledger/fabric-ca-server-config/ca.org1.example.com-cert.pem --ca.keyfile /etc/hyperledger/fabric-ca-server-config/ab7dca5e5f6b1cc24c2023764c5b34d1f78d8614d2a11e74178d2d5509bd3be8_sk -b admin:adminpw -d'
    volumes:
      - ./crypto-config/peerOrganizations/org1.example.com/ca/:/etc/hyperledger/fabric-ca-server-config

  peer0.org1.example.com:
    container_name: peer0.org1.example.com
    image: hyperledger/fabric-peer
    environment:
      - CORE_LEDGER_STATE_STATEDATABASE=CouchDB
      - CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb:5984

      - CORE_PEER_ID=peer0.org1.example.com
      - CORE_PEER_NETWORKID=fabrictest
      - CORE_PEER_ADDRESS=peer0.org1.example.com:7051
      - CORE_PEER_CHAINCODELISTENADDRESS=peer0.org1.example.com:7052
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org1.example.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP

      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=fabrictest
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=fabrictest_default
      - CORE_PEER_GOSSIP_SKIPHANDSHAKE=true
      - CORE_PEER_GOSSIP_USELEADERELECTION=true
      - CORE_PEER_GOSSIP_ORGLEADER=false
      - CORE_PEER_PROFILE_ENABLED=false
      - CORE_PEER_TLS_ENABLED=false
      - CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt
    volumes:
        - /var/run/:/host/var/run/
        - ./crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/msp:/etc/hyperledger/fabric/msp
        - ./crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls:/etc/hyperledger/fabric/tls
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    command: peer node start
    ports:
      - 7051:7051
      - 7052:7052
      - 7053:7053
    depends_on:
      - couchdb
    networks:
      default:
        aliases:
          - fabrictest

  cli:
    container_name: cli
    image: hyperledger/fabric-tools
    tty: true
    environment:
      - GOPATH=/opt/gopath
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_PEER_ID=cli
      - CORE_PEER_ADDRESS=peer0.org1.example.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP
      - CORE_PEER_TLS_ENABLED=false
      - CORE_PEER_TLS_CERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
      - CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    volumes:
        - /var/run/:/host/var/run/
        - ./chaincode/go/:/opt/gopath/src/github.com/hyperledger/fabric/fabrictest/chaincode/go
        - ./crypto-config:/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/
        - ./channel-artifacts:/opt/gopath/src/github.com/hyperledger/fabric/peer/channel-artifacts
    depends_on:
      - peer0.org1.example.com

注意，ca 服务中在 fabric-ca-server-config 后面有一个很长的文件名，以 _sk 结尾，这个需要根据自己的情况修改，到自己的 crypto-config/peerOrganizations/org1.example.com/ca/ 文件夹下查看实际的文件名，修改上面的配置文件，共有两处。

启动：

docker-compose -f docker-peer01.yaml up -d

检查：

docker ps --format 'table {{.Names}}\t{{.Image}}\t{{.Status}}'
NAMES                    IMAGE                        STATUS
cli                      hyperledger/fabric-tools     Up About a minute
peer0.org1.example.com   hyperledger/fabric-peer      Up About a minute
couchdb                  hyperledger/fabric-couchdb   Up About a minute
ca                       hyperledger/fabric-ca        Up About a minute
orderer.example.com      hyperledger/fabric-orderer   Up 12 minutes

（4）安装执行 chaincode

进入 cli 容器：

docker exec -it cli bash

容器内执行命令：

# 创建channel
peer channel create -o orderer.example.com:7050 -c mychannel -t 50 -f ./channel-artifacts/mychannel.tx

# 加入channel
peer channel join -b mychannel.block

# 安装 chaincode
peer chaincode install -n mychannel -p github.com/hyperledger/fabric/fabrictest/chaincode/go/chaincode_example02 -v 1.0

# 实例化
peer chaincode instantiate -o orderer.example.com:7050 -C mychannel -n mychannel -c '{"Args":["init","A","10","B","10"]}' -P "OR ('Org1MSP.member','Org2MSP.member')" -v 1.0

# 查询
peer chaincode query -C mychannel -n mychannel -c '{"Args":["query", "A"]}'
# 结果为 Query Result: 10

peer chaincode query -C mychannel -n mychannel -c '{"Args":["query", "B"]}'

# 转移资产
peer chaincode invoke -C mychannel -n mychannel -c '{"Args":["invoke", "A", "B", "1"]}'

# 查询验证
peer chaincode query -C mychannel -n mychannel -c '{"Args":["query", "A"]}'
# 结果为 Query Result: 9

（5）写org2的peer配置文件启动执行chaincode

编写 docker-peer02.yaml，内容：

version: '2'
services:
  peer0.org2.example.com:
    container_name: peer0.org2.example.com
    image: hyperledger/fabric-peer
    environment:
      - CORE_PEER_ID=peer0.org2.example.com
      - CORE_PEER_NETWORKID=fabrictest
      - CORE_PEER_ADDRESS=peer0.org2.example.com:7051
      - CORE_PEER_CHAINCODELISTENADDRESS=peer0.org2.example.com:7052
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org2.example.com:7051
      - CORE_PEER_LOCALMSPID=Org2MSP

      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=fabrictest
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=fabrictest_default
      - CORE_PEER_GOSSIP_SKIPHANDSHAKE=true
      - CORE_PEER_GOSSIP_USELEADERELECTION=true
      - CORE_PEER_GOSSIP_ORGLEADER=false
      - CORE_PEER_PROFILE_ENABLED=false
      - CORE_PEER_TLS_ENABLED=false
      - CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt
    volumes:
        - /var/run/:/host/var/run/
        - ./crypto-config/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/msp:/etc/hyperledger/fabric/msp
        - ./crypto-config/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls:/etc/hyperledger/fabric/tls
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    command: peer node start
    ports:
      - 8051:7051
      - 8052:7052
      - 8053:7053
    networks:
      default:
        aliases:
          - fabrictest

启动:

docker-compose -f docker-peer02.yaml up -d

检查：

docker ps --format 'table {{.Names}}\t{{.Ports}}'
NAMES                                             PORTS
peer0.org2.example.com                            0.0.0.0:8051->7051/tcp, 0.0.0.0:8052->7052/tcp, 0.0.0.0:8053->7053/tcp
fabrictest-peer0.org1.example.com-mychannel-1.0
cli
peer0.org1.example.com                            0.0.0.0:7051-7053->7051-7053/tcp
couchdb                                           4369/tcp, 9100/tcp, 0.0.0.0:5984->5984/tcp
ca                                                0.0.0.0:7054->7054/tcp
orderer.example.com                               0.0.0.0:7050->7050/tcp

加入 channel ：

docker exec \
-e "CORE_PEER_ID=peer0.org2.example.com" \
-e "CORE_PEER_ADDRESS=peer0.org2.example.com:7051" \
-e "CORE_PEER_CHAINCODELISTENADDRESS=peer0.org2.example.com:7052" \
-e "CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org2.example.com:7051" \
-e "CORE_PEER_LOCALMSPID=Org2MSP" \
-e "CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt" \
-e "CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/users/Admin@org2.example.com/msp" \
cli \
peer channel join -b mychannel.block

此命令中设置了多个环境变量，这是因为 cli 容器是属于 peer01 的，为了让其变为 peer02 就需要通过修改环境变量来实现。

安装chain code：

docker exec \
-e "CORE_PEER_ID=peer0.org2.example.com" \
-e "CORE_PEER_ADDRESS=peer0.org2.example.com:7051" \
-e "CORE_PEER_CHAINCODELISTENADDRESS=peer0.org2.example.com:7052" \
-e "CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org2.example.com:7051" \
-e "CORE_PEER_LOCALMSPID=Org2MSP" \
-e "CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt" \
-e "CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/users/Admin@org2.example.com/msp" \
cli \
peer chaincode install -n mychannel -p github.com/hyperledger/fabric/fabrictest/chaincode/go/chaincode_example02 -v 1.0

查询测试：

docker exec \
-e "CORE_PEER_ID=peer0.org2.example.com" \
-e "CORE_PEER_ADDRESS=peer0.org2.example.com:7051" \
-e "CORE_PEER_CHAINCODELISTENADDRESS=peer0.org2.example.com:7052" \
-e "CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org2.example.com:7051" \
-e "CORE_PEER_LOCALMSPID=Org2MSP" \
-e "CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt" \
-e "CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/users/Admin@org2.example.com/msp" \
cli \
peer chaincode query -C mychannel -n mychannel -c '{"Args":["query", "A"]}'

查询结果：

Query Result: 9

和第一个peer中一致。

HyperLedger Fabric 单机多节点示例

目标

思路

步骤说明

详细步骤

（1）写配置文件生成权限文件、创始块

（2）写orderer配置文件启动

（3）写org1的peer配置文件启动

（4）安装执行 chaincode

（5）写org2的peer配置文件启动执行chaincode

猜你喜欢

热点阅读

HyperLedger Fabric 单机多节点示例

目标

思路

步骤说明

详细步骤

（1）写配置文件 生成权限文件、创始块

（2）写orderer配置文件 启动

（3）写org1的peer配置文件 启动

（4）安装执行 chaincode

（5）写org2的peer配置文件 启动 执行chaincode

猜你喜欢

热点阅读

（1）写配置文件生成权限文件、创始块

（2）写orderer配置文件启动

（3）写org1的peer配置文件启动

（5）写org2的peer配置文件启动执行chaincode