Android 开发也要懂得数据结构 - HashMap源码
2020-12-25 本文已影响0人
进击的包籽
- HashMap不仅是Android开发中常用的数据结构,面试也是高频出现,所以了解一下源码还是非常必要的。
- 本文章使用的是 JDK1.8 ,不同版本源码有差异。
- 文章里面的图片来自 极客时间,王争老师的数据结构与算法课。
- 极客时间 - 数据结构与算法
1.HashMap特点
- Collection 是集合,有数组(ArrayList)查找快增删慢,有链表(LinkList)增删快查找慢,Map 就是数组与链表的结合体,结合了两的优点。
- HashMap 的数据关系是 key 到 value 的映射关系,key 是唯一的,value 是可以重复的。
- HashMap 的 Hash , 是因为 key 是需要计算哈希值,这种数组就是散列表。
- HashMap 可以理解为 key计算后的位置用 数组 保存,数组里面的内容放着 链表 ,链表的节点是 key-value 一个个保存起来,查找的时候,快速找到数组中对应的位置,然后遍历链表。
- HashMap 非线程安全,可以用 HashTable
- HashMap 数据是无序的,需要有序的使用 LinkedHashMap。
2.HashMap 的继承关系
- HashMap继承于 Map,而LinkedHashMap 是继承于HashMap。
3.HashMap常用方法
3.1 构造方法
- 默认构造方法,只初始化了扩容因数,0.75,就是HashMap的数组容量使用了75%,就要进行扩容操作了,注释还说明初始容量为16。
/**
* Constructs an empty <tt>HashMap</tt> with the default initial capacity
* (16) and the default load factor (0.75).
*/
public HashMap() {
this.loadFactor = DEFAULT_LOAD_FACTOR; // all other fields defaulted
}
- 自定义初始容量和扩容因子的构造方法,initialCapacity为初始容量,最大不超过2的30次方,loadFactor为扩容因子,必需为大于0的浮点数。
/**
* The maximum capacity, used if a higher value is implicitly specified
* by either of the constructors with arguments.
* MUST be a power of two <= 1<<30.
*/
static final int MAXIMUM_CAPACITY = 1 << 30;
/**
* Constructs an empty <tt>HashMap</tt> with the specified initial
* capacity and load factor.
*
* @param initialCapacity the initial capacity
* @param loadFactor the load factor
* @throws IllegalArgumentException if the initial capacity is negative
* or the load factor is nonpositive
*/
public HashMap(int initialCapacity, float loadFactor) {
//小于0走异常处理。
if (initialCapacity < 0)
throw new IllegalArgumentException("Illegal initial capacity: " +
initialCapacity);
//最大不能超过1左移30位,也就是2的30次方,非常大的数。
if (initialCapacity > MAXIMUM_CAPACITY)
initialCapacity = MAXIMUM_CAPACITY;
//如果扩容因子小于0,或者不是浮点数,报异常处理。
if (loadFactor <= 0 || Float.isNaN(loadFactor))
throw new IllegalArgumentException("Illegal load factor: " +
loadFactor);
this.loadFactor = loadFactor;
this.threshold = tableSizeFor(initialCapacity);
}
- 传入Map的构造方法,默认扩容因子也是0.75,可以将Map转化为HashMap。
/**
* Constructs a new <tt>HashMap</tt> with the same mappings as the
* specified <tt>Map</tt>. The <tt>HashMap</tt> is created with
* default load factor (0.75) and an initial capacity sufficient to
* hold the mappings in the specified <tt>Map</tt>.
*
* @param m the map whose mappings are to be placed in this map
* @throws NullPointerException if the specified map is null
*/
public HashMap(Map<? extends K, ? extends V> m) {
this.loadFactor = DEFAULT_LOAD_FACTOR;
putMapEntries(m, false);
}
3.2 放入元素 put(K key, V value)
- 首先看 hash(Object key) 方法,就是判断元素存放在数组的位置,如果空就返回 0,否则 key 的哈希值用临时变量 h 保存,再和 h 无符号右移16位的结果(>>>是无符号右移,高位补0),做异或操作(^是异或),算出存放在数组的位置,这种哈希计算过的数组其实就是 散列表。如果计算出来的结果一样,也就是哈希碰撞,那数据后面会用链表存放。
- 下图就是散列表。
- putVal(hash(key), key, value, false, true),方法有五个参数,第一个是计算的位置,第二个是 key , 第三个是value , 第四个是否修改已存在的值,最后一个参数看意思是创建表格。
- 如果key 为空,null 是无法计算哈希值的,就返回0,所以 HashMap 是可以放一个 key 为空的元素的。
/**
* Associates the specified value with the specified key in this map.
* If the map previously contained a mapping for the key, the old
* value is replaced.
*
* @param key key with which the specified value is to be associated
* @param value value to be associated with the specified key
* @return the previous value associated with <tt>key</tt>, or
* <tt>null</tt> if there was no mapping for <tt>key</tt>.
* (A <tt>null</tt> return can also indicate that the map
* previously associated <tt>null</tt> with <tt>key</tt>.)
*/
public V put(K key, V value) {
return putVal(hash(key), key, value, false, true);
}
/**
* Computes key.hashCode() and spreads (XORs) higher bits of hash
* to lower. Because the table uses power-of-two masking, sets of
* hashes that vary only in bits above the current mask will
* always collide. (Among known examples are sets of Float keys
* holding consecutive whole numbers in small tables.) So we
* apply a transform that spreads the impact of higher bits
* downward. There is a tradeoff between speed, utility, and
* quality of bit-spreading. Because many common sets of hashes
* are already reasonably distributed (so don't benefit from
* spreading), and because we use trees to handle large sets of
* collisions in bins, we just XOR some shifted bits in the
* cheapest possible way to reduce systematic lossage, as well as
* to incorporate impact of the highest bits that would otherwise
* never be used in index calculations because of table bounds.
*/
static final int hash(Object key) {
int h;
//如果key为空,就返回0
//否者key的哈希码 异或 key无符号右移16位的结果
return (key == null) ? 0 : (h = key.hashCode()) ^ (h >>> 16);
}
- Node<K,V> 节点类,我们可以看到,是单链表结构,还重写了equals(Object o)。
/**
* Basic hash bin node, used for most entries. (See below for
* TreeNode subclass, and in LinkedHashMap for its Entry subclass.)
*/
static class Node<K,V> implements Map.Entry<K,V> {
final int hash;
final K key;
V value;
//单链表结构
Node<K,V> next;
Node(int hash, K key, V value, Node<K,V> next) {
this.hash = hash;
this.key = key;
this.value = value;
this.next = next;
}
public final K getKey() { return key; }
public final V getValue() { return value; }
public final String toString() { return key + "=" + value; }
public final int hashCode() {
return Objects.hashCode(key) ^ Objects.hashCode(value);
}
public final V setValue(V newValue) {
V oldValue = value;
value = newValue;
return oldValue;
}
//重写equals
public final boolean equals(Object o) {
if (o == this)
return true;
if (o instanceof Map.Entry) {
Map.Entry<?,?> e = (Map.Entry<?,?>)o;
//对比key和value
if (Objects.equals(key, e.getKey()) &&
Objects.equals(value, e.getValue()))
return true;
}
return false;
}
}
3.3 HashMap核心 putVal(int hash, K key, V value, boolean onlyIfAbsent,boolean evict)
-
这个方法看到Node<K,V>[],HashMap的结构就能理解了吧。
-
HashMap为了解决散列冲突,就用了链表法。
链表法
-
存放数据的链表,在长度在 8以下 的时候,是 链表 存储,8以上 或者数组长度大于64时就红黑树存储。
-
由于方法细节太多,直接写注释一步步好理解。
/**
* The bin count threshold for using a tree rather than list for a
* bin. Bins are converted to trees when adding an element to a
* bin with at least this many nodes. The value must be greater
* than 2 and should be at least 8 to mesh with assumptions in
* tree removal about conversion back to plain bins upon
* shrinkage.
*/
static final int TREEIFY_THRESHOLD = 8;
/**
* Implements Map.put and related methods
*
* @param hash hash for key
* @param key the key
* @param value the value to put
* @param onlyIfAbsent if true, don't change existing value
* @param evict if false, the table is in creation mode.
* @return previous value, or null if none
*/
final V putVal(int hash, K key, V value, boolean onlyIfAbsent,
boolean evict) {
//分别是散列表,节点,散列表长度,索引位置
Node<K,V>[] tab; Node<K,V> p; int n, i;
//如果散列表为空或者散列表长度为0
if ((tab = table) == null || (n = tab.length) == 0)
//resize()是创建哈希表,长度为16,并且将长度赋值给n
n = (tab = resize()).length;
//找到hash值在当前哈希表中的位置,该位置的节点赋值给p,且判断该位置是否为空
if ((p = tab[i = (n - 1) & hash]) == null)
//如果为空就把这个元素放在这个位置
tab[i] = newNode(hash, key, value, null);
else {
Node<K,V> e; K k;
//如果hash值相同,key也相同
if (p.hash == hash &&
((k = p.key) == key || (key != null && key.equals(k))))
//将节点p赋值给e
e = p;
//如果p是树节点
else if (p instanceof TreeNode)
//创建一个树节点赋值给e
e = ((TreeNode<K,V>)p).putTreeVal(this, tab, hash, key, value);
else {
//链表节点,就遍历链表
for (int binCount = 0; ; ++binCount) {
//将p的下一节点赋值给e,且为空
if ((e = p.next) == null) {
//找到链表尾部,插入新的节点
p.next = newNode(hash, key, value, null);
//如果链表的长度大于8的时候
if (binCount >= TREEIFY_THRESHOLD - 1) // -1 for 1st
//链表转树结构
treeifyBin(tab, hash);
break;
}
//遍历到的位置已经有元素了,这里就是遍历链表一直循环next,直到为空停止
if (e.hash == hash &&
((k = e.key) == key || (key != null && key.equals(k))))
break;
p = e;
}
}
//如果当前节点不为空,前面的操作除了最后一个else,其他就是找到已存在的节点
if (e != null) { // existing mapping for key
//当前节点的值赋值给oldValue
V oldValue = e.value;
//如果不修改值,或者oldValue 为空(存储value为空)
if (!onlyIfAbsent || oldValue == null)
//就修改当前节点的值
e.value = value;
afterNodeAccess(e);
//修改值,在这return,不再增加数据的长度
return oldValue;
}
}
++modCount;
//添加好元素,长度+1
if (++size > threshold)
//扩容操作
resize();
afterNodeInsertion(evict);
return null;
}
/**
* Replaces all linked nodes in bin at index for given hash unless
* table is too small, in which case resizes instead.
*/
final void treeifyBin(Node<K,V>[] tab, int hash) {
int n, index; Node<K,V> e;
//如果哈希表为空,或者哈希表长度小于64,优先扩容,而不是转为红黑树
if (tab == null || (n = tab.length) < MIN_TREEIFY_CAPACITY)
//扩容
resize();
//否则判断不为空就转为树节点
else if ((e = tab[index = (n - 1) & hash]) != null) {
TreeNode<K,V> hd = null, tl = null;
do {
TreeNode<K,V> p = replacementTreeNode(e, null);
if (tl == null)
hd = p;
else {
p.prev = tl;
tl.next = p;
}
tl = p;
} while ((e = e.next) != null);
if ((tab[index] = hd) != null)
hd.treeify(tab);
}
}
3.4 扩容 resize()
- 扩容为原来的2倍大小,扩容完,需要重写计算位置,重写排位置。
/**
* Initializes or doubles table size. If null, allocates in
* accord with initial capacity target held in field threshold.
* Otherwise, because we are using power-of-two expansion, the
* elements from each bin must either stay at same index, or move
* with a power of two offset in the new table.
*
* @return the table
*/
final Node<K,V>[] resize() {
Node<K,V>[] oldTab = table;
int oldCap = (oldTab == null) ? 0 : oldTab.length;
int oldThr = threshold;
int newCap, newThr = 0;
if (oldCap > 0) {
//最大不能超过Integer.MAX_VALUE
if (oldCap >= MAXIMUM_CAPACITY) {
threshold = Integer.MAX_VALUE;
return oldTab;
}
//扩容为原来的2倍
else if ((newCap = oldCap << 1) < MAXIMUM_CAPACITY &&
oldCap >= DEFAULT_INITIAL_CAPACITY)
newThr = oldThr << 1; // double threshold
}
else if (oldThr > 0) // initial capacity was placed in threshold
newCap = oldThr;
else { // zero initial threshold signifies using defaults
//创建默认大小,长度16
newCap = DEFAULT_INITIAL_CAPACITY;
//阈值0.75 * 16
newThr = (int)(DEFAULT_LOAD_FACTOR * DEFAULT_INITIAL_CAPACITY);
}
if (newThr == 0) {
float ft = (float)newCap * loadFactor;
newThr = (newCap < MAXIMUM_CAPACITY && ft < (float)MAXIMUM_CAPACITY ?
(int)ft : Integer.MAX_VALUE);
}
threshold = newThr;
@SuppressWarnings({"rawtypes","unchecked"})
Node<K,V>[] newTab = (Node<K,V>[])new Node[newCap];
table = newTab;
if (oldTab != null) {
for (int j = 0; j < oldCap; ++j) {
Node<K,V> e;
if ((e = oldTab[j]) != null) {
oldTab[j] = null;
if (e.next == null)
newTab[e.hash & (newCap - 1)] = e;
else if (e instanceof TreeNode)
((TreeNode<K,V>)e).split(this, newTab, j, oldCap);
else { // preserve order
Node<K,V> loHead = null, loTail = null;
Node<K,V> hiHead = null, hiTail = null;
Node<K,V> next;
do {
next = e.next;
if ((e.hash & oldCap) == 0) {
if (loTail == null)
loHead = e;
else
loTail.next = e;
loTail = e;
}
else {
if (hiTail == null)
hiHead = e;
else
hiTail.next = e;
hiTail = e;
}
} while ((e = next) != null);
if (loTail != null) {
loTail.next = null;
newTab[j] = loHead;
}
if (hiTail != null) {
hiTail.next = null;
newTab[j + oldCap] = hiHead;
}
}
}
}
}
return newTab;
}
3.5 查找元素 get(Object key)
- 查找比较简单,key为空,就是hash为0,有就返回,没有就返回null。
- key 不为空,找到就返回 value,找不到就返回null。
/**
* Returns the value to which the specified key is mapped,
* or {@code null} if this map contains no mapping for the key.
*
* <p>More formally, if this map contains a mapping from a key
* {@code k} to a value {@code v} such that {@code (key==null ? k==null :
* key.equals(k))}, then this method returns {@code v}; otherwise
* it returns {@code null}. (There can be at most one such mapping.)
*
* <p>A return value of {@code null} does not <i>necessarily</i>
* indicate that the map contains no mapping for the key; it's also
* possible that the map explicitly maps the key to {@code null}.
* The {@link #containsKey containsKey} operation may be used to
* distinguish these two cases.
*
* @see #put(Object, Object)
*/
public V get(Object key) {
Node<K,V> e;
return (e = getNode(hash(key), key)) == null ? null : e.value;
}
/**
* Implements Map.get and related methods
*
* @param hash hash for key
* @param key the key
* @return the node, or null if none
*/
final Node<K,V> getNode(int hash, Object key) {
Node<K,V>[] tab; Node<K,V> first, e; int n; K k;
if ((tab = table) != null && (n = tab.length) > 0 &&
(first = tab[(n - 1) & hash]) != null) {
if (first.hash == hash && // always check first node
((k = first.key) == key || (key != null && key.equals(k))))
return first;
if ((e = first.next) != null) {
if (first instanceof TreeNode)
return ((TreeNode<K,V>)first).getTreeNode(hash, key);
do {
if (e.hash == hash &&
((k = e.key) == key || (key != null && key.equals(k))))
return e;
} while ((e = e.next) != null);
}
}
return null;
}
3.6 移除元素 remove(Object key)
/**
* Removes the mapping for the specified key from this map if present.
*
* @param key key whose mapping is to be removed from the map
* @return the previous value associated with <tt>key</tt>, or
* <tt>null</tt> if there was no mapping for <tt>key</tt>.
* (A <tt>null</tt> return can also indicate that the map
* previously associated <tt>null</tt> with <tt>key</tt>.)
*/
public V remove(Object key) {
Node<K,V> e;
return (e = removeNode(hash(key), key, null, false, true)) == null ?
null : e.value;
}
/**
* Implements Map.remove and related methods
*
* @param hash hash for key
* @param key the key
* @param value the value to match if matchValue, else ignored
* @param matchValue if true only remove if value is equal
* @param movable if false do not move other nodes while removing
* @return the node, or null if none
*/
final Node<K,V> removeNode(int hash, Object key, Object value,
boolean matchValue, boolean movable) {
Node<K,V>[] tab; Node<K,V> p; int n, index;
//如果散列表不为空且hash对应位置有元素,找到赋值给p
if ((tab = table) != null && (n = tab.length) > 0 &&
(p = tab[index = (n - 1) & hash]) != null) {
Node<K,V> node = null, e; K k; V v;
//如果p就是要找的元素,赋值给node
if (p.hash == hash &&
((k = p.key) == key || (key != null && key.equals(k))))
node = p;
//如果p不是要找的元素
else if ((e = p.next) != null) {
//如果是树节点,遍历树,找到节点赋值给node
if (p instanceof TreeNode)
node = ((TreeNode<K,V>)p).getTreeNode(hash, key);
else {
//如果是链表,就不停的next,找节点赋值给node
do {
if (e.hash == hash &&
((k = e.key) == key ||
(key != null && key.equals(k)))) {
node = e;
break;
}
p = e;
} while ((e = e.next) != null);
}
}
//如果找的节点不为空,且value值符合
if (node != null && (!matchValue || (v = node.value) == value ||
(value != null && value.equals(v)))) {
//树节点就用树的删除
if (node instanceof TreeNode)
((TreeNode<K,V>)node).removeTreeNode(this, tab, movable);
//链表只有一个的情况next为空,相当于置空
else if (node == p)
tab[index] = node.next;
//链表后面有元素,直接指向next
else
p.next = node.next;
++modCount;
--size;
afterNodeRemoval(node);
return node;
}
}
return null;
}
3.7 清空 clear()
- 直接遍历散列表,置空,引用断开GC时自己会回收。
/**
* Removes all of the mappings from this map.
* The map will be empty after this call returns.
*/
public void clear() {
Node<K,V>[] tab;
modCount++;
if ((tab = table) != null && size > 0) {
size = 0;
for (int i = 0; i < tab.length; ++i)
tab[i] = null;
}
}
3.8 长度 size()
- 这个长度是元素的数量。
/**
* Returns the number of key-value mappings in this map.
*
* @return the number of key-value mappings in this map
*/
public int size() {
return size;
}
3.9 获取所有元素的集合 entrySet()
- 这个方法可以获取所有 Entry
/**
* Returns a {@link Set} view of the mappings contained in this map.
* The set is backed by the map, so changes to the map are
* reflected in the set, and vice-versa. If the map is modified
* while an iteration over the set is in progress (except through
* the iterator's own <tt>remove</tt> operation, or through the
* <tt>setValue</tt> operation on a map entry returned by the
* iterator) the results of the iteration are undefined. The set
* supports element removal, which removes the corresponding
* mapping from the map, via the <tt>Iterator.remove</tt>,
* <tt>Set.remove</tt>, <tt>removeAll</tt>, <tt>retainAll</tt> and
* <tt>clear</tt> operations. It does not support the
* <tt>add</tt> or <tt>addAll</tt> operations.
*
* @return a set view of the mappings contained in this map
*/
public Set<Map.Entry<K,V>> entrySet() {
Set<Map.Entry<K,V>> es;
return (es = entrySet) == null ? (entrySet = new EntrySet()) : es;
}
- 遍历使用方法
HashMap<String, String> hashMap = new HashMap<>();
Iterator iterator = hashMap.entrySet().iterator();
while (iterator.hasNext()) {
Map.Entry<String, String> entry = (Map.Entry<String, String>) iterator.next();
String key = entry.getKey();
String value = entry.getValue();
}
3.10 获取key的集合 keySet()
/**
* Returns a {@link Set} view of the keys contained in this map.
* The set is backed by the map, so changes to the map are
* reflected in the set, and vice-versa. If the map is modified
* while an iteration over the set is in progress (except through
* the iterator's own <tt>remove</tt> operation), the results of
* the iteration are undefined. The set supports element removal,
* which removes the corresponding mapping from the map, via the
* <tt>Iterator.remove</tt>, <tt>Set.remove</tt>,
* <tt>removeAll</tt>, <tt>retainAll</tt>, and <tt>clear</tt>
* operations. It does not support the <tt>add</tt> or <tt>addAll</tt>
* operations.
*
* @return a set view of the keys contained in this map
*/
public Set<K> keySet() {
Set<K> ks = keySet;
if (ks == null) {
ks = new KeySet();
keySet = ks;
}
return ks;
}
- 使用
HashMap<String, String> hashMap = new HashMap<>();
Iterator iterator = hashMap.keySet().iterator();
while (iterator.hasNext()){
String key = (String) iterator.next();
String value = hashMap.get(key);
}
最后,如果有错误,欢迎大家指出,我会继续学习修改,谢谢~~