学习kubernetes(一):kubeasz部署基于Flann
2019-03-28 本文已影响0人
ljyfree
参考http://aspirer.wang/?p=1205，使用kubeasz部署kubernetes，只涉及容器在节点间通信
测试环境
准备三台虚拟机(CentOS7.5)
k8s-master:10.25.151.100
k8s-node-1:10.25.151.103
k8s-node-2:10.25.151.104
准备工作(主节点上进行)
- 下载安装必要软件
# yum install git python-pip -y
# pip install pip --upgrade -i http://mirrors.aliyun.com/pypi/simple/ --trusted-host mirrors.aliyun.com
# pip install --no-cache-dir ansible -i http://mirrors.aliyun.com/pypi/simple/ --trusted-host mirrors.aliyun.com
- 配置密钥并输入登录各个节点的root密码
# ssh-keygen -t rsa -b 2048 (三个回车)
# ssh-copy-id 10.25.151.100
# ssh-copy-id 10.25.151.101
# ssh-copy-id 10.25.151.102
- 获取kubeasz
# git clone https://github.com/gjmzj/kubeasz.git
# ll
total 213968
-rw-------. 1 root root 1518 Mar 26 02:18 anaconda-ks.cfg
drwxr-xr-x. 2 root root 4096 Mar 11 09:02 bin
-rw-r--r--. 1 root root 219093842 Mar 27 2019 k8s.1-13-4.tar.gz
drwxr-xr-x. 3 root root 36 Mar 26 04:29 kubeasz
- 拷贝文件
# mkdir -p /etc/ansible
# mv kubeasz/* /etc/ansible
- 下载k8s二进制包 https://pan.baidu.com/s/1c4RFaA, 本例使用k8s.1-13-4.tar.gz
- 解压缩并拷贝到ansible/bin下面
# tar zxvf k8s.1-13-4.tar.gz
bin/
bin/loopback
bin/kubelet
bin/docker-init
bin/docker-compose
bin/docker-proxy
bin/portmap
bin/containerd-shim
bin/etcd
bin/containerd
bin/helm
bin/cfssl-certinfo
bin/kube-proxy
bin/kube-controller-manager
bin/cfssljson
bin/bridge
bin/ctr
bin/kube-apiserver
bin/docker
bin/etcdctl
bin/kubectl
bin/dockerd
bin/cfssl
bin/calicoctl
bin/readme.md
bin/host-local
bin/kube-scheduler
bin/runc
bin/flannel
#
# mkdir -p /etc/ansible
# mv bin/* /etc/ansible/bin
mv: overwrite ‘/etc/ansible/bin/readme.md’? y
#
- 配置ansible的hosts文件
# cd /etc/ansible
# cp example/hosts.allinone.example hosts
编辑后
# cat hosts
# 集群部署节点：一般为运行ansible 脚本的节点
# 变量 NTP_ENABLED (=yes/no) 设置集群是否安装 chrony 时间同步
[deploy]
10.25.151.100 NTP_ENABLED=no
# etcd集群请提供如下NODE_NAME，注意etcd集群必须是1,3,5,7...奇数个节点
[etcd]
10.25.151.100 NODE_NAME=etcd1
[kube-master]
10.25.151.100
[kube-node]
10.25.151.103
10.25.151.104
# 参数 NEW_INSTALL：yes表示新建，no表示使用已有harbor服务器
# 如果不使用域名，可以设置 HARBOR_DOMAIN=""
[harbor]
#192.168.1.8 HARBOR_DOMAIN="harbor.yourdomain.com" NEW_INSTALL=no
# 【可选】外部负载均衡，用于自有环境负载转发 NodePort 暴露的服务等
[ex-lb]
#192.168.1.6 LB_ROLE=backup EX_VIP=192.168.1.250
#192.168.1.7 LB_ROLE=master EX_VIP=192.168.1.250
[all:vars]
# ---------集群主要参数---------------
#集群部署模式：allinone, single-master, multi-master
DEPLOY_MODE=allinone
#集群 MASTER IP，自动生成
MASTER_IP="{{ groups['kube-master'][0] }}"
KUBE_APISERVER="https://{{ MASTER_IP }}:6443"
# 集群网络插件，目前支持calico, flannel, kube-router, cilium
CLUSTER_NETWORK="flannel"
# 服务网段 (Service CIDR），注意不要与内网已有网段冲突
SERVICE_CIDR="10.68.0.0/16"
# POD 网段 (Cluster CIDR），注意不要与内网已有网段冲突
CLUSTER_CIDR="172.20.0.0/16"
# 服务端口范围 (NodePort Range)
NODE_PORT_RANGE="20000-40000"
# kubernetes 服务 IP (预分配，一般是 SERVICE_CIDR 中第一个IP)
CLUSTER_KUBERNETES_SVC_IP="10.68.0.1"
# 集群 DNS 服务 IP (从 SERVICE_CIDR 中预分配)
CLUSTER_DNS_SVC_IP="10.68.0.2"
# 集群 DNS 域名
CLUSTER_DNS_DOMAIN="cluster.local."
# ---------附加参数--------------------
#默认二进制文件目录
bin_dir="/opt/kube/bin"
#证书目录
ca_dir="/etc/kubernetes/ssl"
#部署目录，即 ansible 工作目录
base_dir="/etc/ansible"
#
- 确认节点网络可达
# ansible all -m ping
10.25.151.104 | SUCCESS => {
"changed": false,
"ping": "pong"
}
10.25.151.100 | SUCCESS => {
"changed": false,
"ping": "pong"
}
10.25.151.103 | SUCCESS => {
"changed": false,
"ping": "pong"
}
- 查看playbook
# ll
total 88
-rw-r--r--. 1 root root 499 Mar 26 04:19 01.prepare.yml
-rw-r--r--. 1 root root 58 Mar 26 04:19 02.etcd.yml
-rw-r--r--. 1 root root 87 Mar 26 04:19 03.docker.yml
-rw-r--r--. 1 root root 532 Mar 26 04:19 04.kube-master.yml
-rw-r--r--. 1 root root 72 Mar 26 04:19 05.kube-node.yml
-rw-r--r--. 1 root root 346 Mar 26 04:19 06.network.yml
-rw-r--r--. 1 root root 77 Mar 26 04:19 07.cluster-addon.yml
-rw-r--r--. 1 root root 1521 Mar 26 04:19 11.harbor.yml
-rw-r--r--. 1 root root 411 Mar 26 04:19 22.upgrade.yml
-rw-r--r--. 1 root root 1394 Mar 26 04:19 23.backup.yml
-rw-r--r--. 1 root root 1391 Mar 26 04:19 24.restore.yml
-rw-r--r--. 1 root root 1723 Mar 26 04:19 90.setup.yml
-rw-r--r--. 1 root root 5941 Mar 26 04:19 99.clean.yml
-rw-r--r--. 1 root root 10283 Mar 26 04:19 ansible.cfg
drwxr-xr-x. 2 root root 4096 Mar 26 04:32 bin
drwxr-xr-x. 4 root root 36 Mar 26 04:19 dockerfiles
drwxr-xr-x. 8 root root 92 Mar 26 04:19 docs
drwxr-xr-x. 2 root root 47 Mar 26 04:19 down
drwxr-xr-x. 2 root root 254 Mar 26 04:19 example
-rw-r--r--. 1 root root 1884 Mar 26 04:34 hosts
drwxr-xr-x. 14 root root 218 Mar 26 04:19 manifests
drwxr-xr-x. 2 root root 245 Mar 26 04:19 pics
-rw-r--r--. 1 root root 5056 Mar 26 04:19 README.md
drwxr-xr-x. 22 root root 4096 Mar 26 04:19 roles
drwxr-xr-x. 2 root root 272 Mar 26 04:19 tools
[root@k8s-master ansible]#
利用ansible集群安装
- 可以分步安装(某步失败可以重复再执行一下),或者
# ansible-playbook 01.prepare.yml
# ansible-playbook 02.etcd.yml
# ansible-playbook 03.docker.yml
# ansible-playbook 04.kube-master.yml
# ansible-playbook 05.kube-node.yml
# ansible-playbook 06.network.yml
- 一步安装
# ansible-playbook 90.setup.yml
- 安装完毕后，需要重新连接或是新开终端才能使用快捷命令(不用全路径)
- 查看集群状态
[root@localhost ~]# kubectl get node
NAME STATUS ROLES AGE VERSION
10.25.151.100 Ready master 16h v1.13.4
10.25.151.103 Ready node 16h v1.13.4
10.25.151.104 Ready node 16h v1.13.4
[root@localhost ~]#
[root@localhost ~]# kubectl get componentstatus
NAME STATUS MESSAGE ERROR
scheduler Healthy ok
controller-manager Healthy ok
etcd-0 Healthy {"health": "true"}
[root@localhost ~]# kubectl cluster-info
Kubernetes master is running at https://10.25.151.100:6443
To further debug and diagnose cluster problems, use 'kubectl cluster-info dump'.
[root@localhost ~]#
[root@localhost ~]# kubectl get pod --all-namespaces
NAMESPACE NAME READY STATUS RESTARTS AGE
kube-system kube-flannel-ds-amd64-dtsgm 1/1 Running 0 54m
kube-system kube-flannel-ds-amd64-hfnr6 1/1 Running 0 54m
kube-system kube-flannel-ds-amd64-pnh4m 1/1 Running 0 54m
[root@localhost ~]#
[root@localhost ~]# kubectl get svc --all-namespaces
NAMESPACE NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
default kubernetes ClusterIP 10.68.0.1 <none> 443/TCP 16h
[root@localhost ~]#
- 查看flannel子网信息(以master为例)
# cat /run/flannel/subnet.env
FLANNEL_NETWORK=172.20.0.0/16
FLANNEL_SUBNET=172.20.0.1/24
FLANNEL_MTU=1450
FLANNEL_IPMASQ=true
- 确认每个节点docker0/flannel的IP地址
100上
docker0 172.17.0.1/16
flannel.1 172.20.0.0/32
103上
docker0 172.17.0.1/16
flannel.1 172.20.1.0/32
104上
docker0 172.17.0.1/16
flannel.1 172.20.2.0/32
- flannel的使用说明文档的路径
/etc/ansible/docs/setup/network-plugin/flannel.md
验证网络
节点上启动pod
- 随便哪个节点上拉一个busybox的小镜像
# docker pull busybox
Using default tag: latest
latest: Pulling from library/busybox
697743189b6d: Pull complete
Digest: sha256:061ca9704a714ee3e8b80523ec720c64f6209ad3f97c0ff7cb9ec7d19f15149f
Status: Downloaded newer image for busybox:latest
[root@localhost ~]#
[root@localhost ~]# docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
busybox latest d8233ab899d4 5 weeks ago 1.2MB
jmgao1983/flannel v0.11.0-amd64 ff281650a721 8 weeks ago 52.6MB
mirrorgooglecontainers/pause-amd64 3.1 da86e6ba6ca1 15 months ago 742kB
[root@localhost ~]#
- 创建三个busybox的pod
# kubectl run test --image=busybox --replicas=3 sleep 30000
kubectl run --generator=deployment/apps.v1 is DEPRECATED and will be removed in a future version. Use kubectl run --generator=run-pod/v1 or kubectl create instead.
deployment.apps/test created
#
# kubectl get pod --all-namespaces -o wide|head -n 4
NAMESPACE NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
default test-568866f478-6z87m 1/1 Running 0 29s 172.20.2.2 10.25.151.104 <none> <none>
default test-568866f478-q7fft 1/1 Running 0 29s 172.20.1.2 10.25.151.103 <none> <none>
default test-568866f478-sgb5l 1/1 Running 0 29s 172.20.0.2 10.25.151.100 <none> <none>
可以看到这三个pod启动在不同的节点上了
默认容器跨节点通信使用UDP封装
- 登录本地的pod,查看IP和路由
[root@localhost ~]# docker ps | grep busybox
cac2bc7afd61 busybox "sleep 30000" 19 minutes ago Up 19 minutes k8s_test_test-568866f478-sgb5l_default_3c4e60ff-5104-11e9-b02f-005056a921d2_0
[root@localhost ~]#
[root@localhost ~]#
[root@localhost ~]# docker exec -ti cac2bc7afd61 /bin/sh
/ #
/ # ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
3: eth0@if6: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1450 qdisc noqueue
link/ether 9e:c3:f5:14:6e:ac brd ff:ff:ff:ff:ff:ff
inet 172.20.0.2/24 scope global eth0
valid_lft forever preferred_lft forever
/ #
/ # ip route
default via 172.20.0.1 dev eth0
172.20.0.0/24 dev eth0 scope link src 172.20.0.2
172.20.0.0/16 via 172.20.0.1 dev eth0
/ #
网关172.20.0.1是cni0的IP
- 从这个容器去ping其它节点的容器,是通的
/ # ifconfig | grep 172
inet addr:172.20.0.2 Bcast:0.0.0.0 Mask:255.255.255.0
/ #
/ # ping 172.20.2.2 -s 1200
PING 172.20.2.2 (172.20.2.2): 1200 data bytes
1208 bytes from 172.20.2.2: seq=0 ttl=62 time=0.973 ms
1208 bytes from 172.20.2.2: seq=1 ttl=62 time=0.581 ms
- 跟踪路由,可以看到是container(master)->cni0(master)->flannel.1(node-2)->container(node-2)
/ # traceroute 172.20.2.2
traceroute to 172.20.2.2 (172.20.2.2), 30 hops max, 46 byte packets
1 172.20.0.1 (172.20.0.1) 0.017 ms 0.120 ms 0.009 ms
2 172.20.2.0 (172.20.2.0) 0.970 ms 1.123 ms 0.339 ms
3 172.20.2.2 (172.20.2.2) 0.411 ms 3.236 ms 2.842 ms
/ #
- 在master的物理口抓包，可以看到ICMP报文被封装为UDP报文
# tcpdump -i ens160 -enn 'ip[2:2] > 1200 and ip[2:2] < 1500'
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on ens160, link-type EN10MB (Ethernet), capture size 262144 bytes
02:28:05.870909 00:50:56:a9:21:d2 > 00:50:56:a9:5e:81, ethertype IPv4 (0x0800), length 1292: 10.25.151.100.40238 > 10.25.151.104.8472: OTV, flags [I] (0x08), overlay 0, instance 1
e2:70:a7:b2:ef:fc > 5a:b8:85:c1:65:2f, ethertype IPv4 (0x0800), length 1242: 172.20.0.2 > 172.20.2.2: ICMP echo request, id 6400, seq 888, length 1208
02:28:05.871346 00:50:56:a9:5e:81 > 00:50:56:a9:21:d2, ethertype IPv4 (0x0800), length 1292: 10.25.151.104.34945 > 10.25.151.100.8472: OTV, flags [I] (0x08), overlay 0, instance 1
5a:b8:85:c1:65:2f > e2:70:a7:b2:ef:fc, ethertype IPv4 (0x0800), length 1242: 172.20.2.2 > 172.20.0.2: ICMP echo reply, id 6400, seq 888, length 1208
02:28:06.871170 00:50:56:a9:21:d2 > 00:50:56:a9:5e:81, ethertype IPv4 (0x0800), length 1292: 10.25.151.100.40238 > 10.25.151.104.8472: OTV, flags [I] (0x08), overlay 0, instance 1
- 抓包后用wireshark解析，可以看到原始IP报文被封装在UDP，外层IP是node的IP
flannel_udp.png
