在Ubuntu下如何设置无线上网
2016-07-11 本文已影响528人
王宝花
本机使用无线网,未插入网线
![](https://img.haomeiwen.com/i2041409/d822811d26d39836.png)
查看无线上网网卡
![](https://img.haomeiwen.com/i2041409/7d8cc027db456064.png)
设置virtualbox网络>网卡
![](https://img.haomeiwen.com/i2041409/472d30f6bd81a088.png)
进入虚拟机
$cd /etc/network/
$ ls
if-down.d if-post-down.d if-pre-up.d if-up.d interfaces interfaces.d
$ vim interfaces
interfaces文件内容如下
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
auto enp0s3
iface enp0s3 inet dhcp
网卡是
enp0s3
或eth0
无所谓,enp0s3
是Ubuntu16.04的新属性。
dhcp是动态获取IP地址
查看无线网所使用网段、网关等信息
打开物理机的CMD命令行,获取IP信息
ipconfig/all
![](https://img.haomeiwen.com/i2041409/1f507c8ef4cf6192.png)
红色勾勒区域需要写入interfaces文件
将interfaces文件修改如下
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto enp0s3
iface enp0s3 inet static
address 192.168.188.101
netmask 255.0.0.0
network 192.168.188.0
gateway 192.168.188.253
dns-nameservers 8.8.8.8
dns-nameservers 114.114.114.114
dns-nameservers 192.168.188.253
dhcp换成static,动态获取IP换成静态获取;网关可以设置多个;其它一一对应填写即可,照葫芦画瓢即可。
完成
![](https://img.haomeiwen.com/i2041409/ff5acd191d812e0a.png)