基于okhttp和RxJava封装的自动重连的WebSocke
2017-09-28 本文已影响153人
dhhDev
*本篇文章已授权微信公众号 guolin_blog （郭霖）独家发布
一 . 概述
1. RxWebSocket是一个基于okhttp和RxJava封装的WebSocket客户端,此库的核心特点是 除了手动关闭WebSocket(就是RxJava取消订阅),WebSocket在异常关闭的时候(onFailure,发生异常,如WebSocketException等等),会自动重连,永不断连.其次,对WebSocket做的缓存处理,同一个URL,共享一个WebSocket.
2. 由于是基于RxJava封装,所以带来了无限可能,可以和RxBinding,Rxlifecycle一起使用,方便对WebSocket的管理.
项目地址: 欢迎star
效果图
demo效果
重连
项目已经上传Jcenter,依赖方法:
//本项目
compile 'com.dhh:websocket:1.3.0'
//由于项目是基于okhttp,RxJava,RxAndroid编写,所以还需加入如下依赖.
//okhttp,RxJava,RxAndroid
compile 'com.squareup.okhttp3:okhttp:3.9.0'
compile 'io.reactivex:rxjava:1.3.1'
compile 'io.reactivex:rxandroid:1.2.1'
二 . 使用方法
0. 初始化,可以也忽略直接使用.
如果你想使用自己的okhttpClient:
OkHttpClient yourClient = new OkHttpClient();
RxWebSocketUtil.getInstance().setClient(yourClient);
是否打印日志:
RxWebSocketUtil.getInstance().setShowLog(BuildConfig.DEBUG);
1.获取一个WebSocket,接收消息,多种方式:
RxWebSocketUtil.getInstance().getWebSocketInfo(url)
.subscribe(new Action1<WebSocketInfo>() {
@Override
public void call(WebSocketInfo webSocketInfo) {
mWebSocket = webSocketInfo.getWebSocket();
Log.d("MainActivity", webSocketInfo.getString());
Log.d("MainActivity", "ByteString:" + webSocketInfo.getByteString());
}
});
mWebSocket.send("hello word");
//get StringMsg
RxWebSocketUtil.getInstance().getWebSocketString(url)
.subscribe(new Action1<String>() {
@Override
public void call(String s) {
}
});
// get ByteString
RxWebSocketUtil.getInstance().getWebSocketByteString(url)
.subscribe(new Action1<ByteString>() {
@Override
public void call(ByteString byteString) {
}
});
//get WebSocket
RxWebSocketUtil.getInstance().getWebSocket(url)
.subscribe(new Action1<WebSocket>() {
@Override
public void call(WebSocket webSocket) {
}
});
// 带timeout的WebSocket,当在指定时间内没有收到消息,就重连WebSocket.为了适配小米平板.
//小米平板测试的时候,出现网络断连,不发送错误,导致不能重连
RxWebSocketUtil.getInstance().getWebSocketInfo(url,10, TimeUnit.SECONDS)
.subscribe(new Action1<WebSocketInfo>() {
@Override
public void call(WebSocketInfo webSocketInfo) {
}
});
2. 发送消息:
//用WebSocket的引用直接发
mWebSocket.send("hello word");
//url 对应的WebSocket已经打开可以这样send,否则报错
RxWebSocketUtil.getInstance().send(url, "hello");
RxWebSocketUtil.getInstance().send(url, ByteString.EMPTY);
//异步发送,若WebSocket已经打开,直接发送,若没有打开,打开一个WebSocket发送完数据,直接关闭.
RxWebSocketUtil.getInstance().asyncSend(url, "hello");
RxWebSocketUtil.getInstance().asyncSend(url, ByteString.EMPTY);
3.关闭WebSocket
项目是依托RxJava实现的,所以关闭WebSocket的方法也就是在适当的时候注销 Observable,项目里的demo里,写了一个简单的lifecycle,将Observable生命绑定到Activity的onDestroy,自动注销.代码细节请看demo,因为内部实现了同一个URL的WebSocket共享机制,所以当外部所有持有这个URL的Observable都注销后,这个WebSocket连接就会自动关闭.请看原理解析部分.下面两种常用注销方法:
//注意取消订阅,有多种方式,比如 rxlifecycle
mSubscription = RxWebSocketUtil.getInstance().getWebSocketInfo(url)
.subscribe(new Action1<WebSocketInfo>() {
@Override
public void call(WebSocketInfo webSocketInfo) {
mWebSocket = webSocketInfo.getWebSocket();
if (webSocketInfo.isOnOpen()) {
Log.d("MainActivity", " on WebSocket open");
} else {
String string = webSocketInfo.getString();
if (string != null) {
Log.d("MainActivity", string);
textview.setText(Html.fromHtml(string));
}
ByteString byteString = webSocketInfo.getByteString();
if (byteString != null) {
Log.d("MainActivity", "webSocketInfo.getByteString():" + byteString);
}
}
}
});
//注销
if (mSubscription != null) {
mSubscription.unsubscribe();
}
//lifecycle注销,详情看demo
RxWebSocketUtil.getInstance().getWebSocketString(url)
.compose(this.<String>bindOnActivityEvent(ActivityEvent.onDestory))
.subscribe(new Action1<String>() {
@Override
public void call(String s) {
}
});
三. 原理解析
1. 首先需要将okhttp的WebSocket包装成Observable,由于需要将WebSocket,Stringmsg,ByteString等信息一同发送给观察者所以先构建一个WebSocketInfo类,将信息封装:
public class WebSocketInfo {
private WebSocket mWebSocket;
private String mString;
private ByteString mByteString;
private boolean onOpen;
//其他省略
}
onOpen字段主要用来判断当前的这个WebSocketInfo是否是当WebSocket打开时发送的消息(onOpen),这时,Stringmsg和ByteString都是null.
2. 将WebSocketInfo包装成Observable发出:
private final class WebSocketOnSubscribe implements Observable.OnSubscribe<WebSocketInfo> {
private String url;
private WebSocket webSocket;
private WebSocketInfo startInfo, stringInfo, byteStringInfo;
public WebSocketOnSubscribe(String url) {
this.url = url;
startInfo = new WebSocketInfo(true);
stringInfo = new WebSocketInfo();
byteStringInfo = new WebSocketInfo();
}
@Override
public void call(final Subscriber<? super WebSocketInfo> subscriber) {
if (webSocket != null) {
//降低重连频率
if (!"main".equals(Thread.currentThread().getName())) {
SystemClock.sleep(2000);
}
}
initWebSocket(subscriber);
}
private void initWebSocket(final Subscriber<? super WebSocketInfo> subscriber) {
webSocket = client.newWebSocket(getRequest(url), new WebSocketListener() {
@Override
public void onOpen(final WebSocket webSocket, Response response) {
if (showLog) {
Log.d("RxWebSocketUtil", url + " --> onOpen");
}
webSocketMap.put(url, webSocket);
AndroidSchedulers.mainThread().createWorker().schedule(new Action0() {
@Override
public void call() {
if (!subscriber.isUnsubscribed()) {
subscriber.onStart();
startInfo.setWebSocket(webSocket);
subscriber.onNext(startInfo);
}
}
});
}
@Override
public void onMessage(WebSocket webSocket, String text) {
if (!subscriber.isUnsubscribed()) {
stringInfo.setWebSocket(webSocket);
stringInfo.setString(text);
subscriber.onNext(stringInfo);
}
}
@Override
public void onMessage(WebSocket webSocket, ByteString bytes) {
if (!subscriber.isUnsubscribed()) {
byteStringInfo.setWebSocket(webSocket);
byteStringInfo.setByteString(bytes);
subscriber.onNext(byteStringInfo);
}
}
@Override
public void onFailure(WebSocket webSocket, Throwable t, Response response) {
if (showLog) {
Log.e("RxWebSocketUtil", t.toString() + webSocket.request().url().uri().getPath());
}
if (!subscriber.isUnsubscribed()) {
subscriber.onError(t);
}
}
@Override
public void onClosing(WebSocket webSocket, int code, String reason) {
webSocket.close(1000, null);
}
@Override
public void onClosed(WebSocket webSocket, int code, String reason) {
if (showLog) {
Log.d("RxWebSocketUtil", url + " --> onClosed:code= " + code);
}
}
});
subscriber.add(new MainThreadSubscription() {
@Override
protected void onUnsubscribe() {
webSocket.close(3000, "手动关闭");
}
});
}
}
实现一个WebSocketOnSubscribe 将WebSocket的回调转化成subscriber调用.发送给Observable下游.在onOpen时调用 subscriber.onStart(),并且发送一个onOpen的WebSocketInfo.在subscriber注销的时候关闭WebSocket.在call方法最上面有个SystemClock.sleep(2000),这个主要是为了降低在断连的时候的重连频率,将在下面讲到.
包装成Observable:
Observable.create(new WebSocketOnSubscribe(url))
.subscribeOn(Schedulers.io())
.observeOn(AndroidSchedulers.mainThread());
3. 实现自动重连:
Observable.create(new WebSocketOnSubscribe(url))
//自动重连
.timeout(timeout, timeUnit)
.retry()
.subscribeOn(Schedulers.io())
.observeOn(AndroidSchedulers.mainThread());
RxJava retry操作符,很完美的实现了这个功能,当上游发出Throwable的时候,retry将错误吃掉,并重新调用 onSubscribe的call方法,也就是WebSocketOnSubscribe的call,就会重新初始化一个WebSocket连接,达到重连的目的,如果一直没有网络,这个retry的调用频率非常高,所以在call方法里面,当是重连的时候,就SystemClock.sleep(2000),休眠2秒,这样重连的频率就是2秒重连一次. 当然在retry上面还有一个timeout操作符.当subscriber.onNext()在指定时间间隔里没有调用,就发出一个timeoutException,让retry重连WebSocket.这个主要是为了适配部分国产机型,当WebSocket发生连接异常时,不会及时发出错误,如小米平板.在每次重连都会把原来的WebSocket关闭.
4. 实现同一个URL的WebSocket共享
Observable.create(new WebSocketOnSubscribe(url))
//自动重连
.timeout(timeout, timeUnit)
.retry()
//共享
.doOnUnsubscribe(new Action0() {
@Override
public void call() {
observableMap.remove(url);
webSocketMap.remove(url);
if (showLog) {
Log.d("RxWebSocketUtil", "注销");
}
}
})
.doOnNext(new Action1<WebSocketInfo>() {
@Override
public void call(WebSocketInfo webSocketInfo) {
if (webSocketInfo.isOnOpen()) {
webSocketMap.put(url, webSocketInfo.getWebSocket());
}
}
})
.share()
.subscribeOn(Schedulers.io())
.observeOn(AndroidSchedulers.mainThread());
实现共享功能,主要是为了防止一个URL的WebSocket,建立多个连接,这个主要是由RxJava的share操作符实现,share操作符,使得一个Observable可以有多个subscriber,当有多个subscriber时,当所有的subscriber都取消订阅,这个Observable才会取消订阅. getWebSocketInfo()方法完整代码:
public Observable<WebSocketInfo> getWebSocketInfo(final String url, final long timeout, final TimeUnit timeUnit) {
Observable<WebSocketInfo> observable = observableMap.get(url);
if (observable == null) {
observable = Observable.create(new WebSocketOnSubscribe(url))
//自动重连
.timeout(timeout, timeUnit)
.retry()
//共享
.doOnUnsubscribe(new Action0() {
@Override
public void call() {
observableMap.remove(url);
webSocketMap.remove(url);
if (showLog) {
Log.d("RxWebSocketUtil", "注销");
}
}
})
.doOnNext(new Action1<WebSocketInfo>() {
@Override
public void call(WebSocketInfo webSocketInfo) {
if (webSocketInfo.isOnOpen()) {
webSocketMap.put(url, webSocketInfo.getWebSocket());
}
}
})
.share()
.subscribeOn(Schedulers.io())
.observeOn(AndroidSchedulers.mainThread());
observableMap.put(url, observable);
} else {
observable = Observable.merge(Observable.just(new WebSocketInfo(webSocketMap.get(url), true)), observable);
}
return observable;
}
doOnUnsubscribe作用:在Observable注销,即 WebSocket关闭时,移除map中的缓存的Observable和WebSocket.
doOnNext作用: 判断接收到的WebSocketInfo是否是WebSocket在onOpen的时候发的,然后将其缓存起来.作用就是:如果有一个相同的URL订阅Observable,就从缓存中取,这个时候我们应该把一个WebSocket的onOpen事件也发给这个订阅者:
//使用merge操作符,将onOpen事件发给订阅者
observable = Observable.merge(Observable.just(new WebSocketInfo(webSocketMap.get(url), true)), observable);
这样的话,同一个URL的WebSocket,不管在什么地方什么时间订阅,都能收到一个onOpen事件,外部表现的就像一个新的WebSocket.
getWebSocketInfo方法的几种变体:
/**
* default timeout: 30 days
* <p>
* 若忽略小米平板,请调用这个方法
* </p>
*/
public Observable<WebSocketInfo> getWebSocketInfo(String url) {
return getWebSocketInfo(url, 30, TimeUnit.DAYS);
}
public Observable<String> getWebSocketString(String url) {
return getWebSocketInfo(url)
.map(new Func1<WebSocketInfo, String>() {
@Override
public String call(WebSocketInfo webSocketInfo) {
return webSocketInfo.getString();
}
})
.filter(new Func1<String, Boolean>() {
@Override
public Boolean call(String s) {
return s != null;
}
});
}
public Observable<ByteString> getWebSocketByteString(String url) {
return getWebSocketInfo(url)
.map(new Func1<WebSocketInfo, ByteString>() {
@Override
public ByteString call(WebSocketInfo webSocketInfo) {
return webSocketInfo.getByteString();
}
})
.filter(new Func1<ByteString, Boolean>() {
@Override
public Boolean call(ByteString byteString) {
return byteString != null;
}
});
}
public Observable<WebSocket> getWebSocket(String url) {
return getWebSocketInfo(url)
.map(new Func1<WebSocketInfo, WebSocket>() {
@Override
public WebSocket call(WebSocketInfo webSocketInfo) {
return webSocketInfo.getWebSocket();
}
});
}
5 . send信息到服务端
上面已经讲到WebSocketInfo包含了WebSocket,所以在订阅后,就可以拿到这个WebSocket引用就可以WebSocket.send发送消息到服务端.当然我们的RxWebSocketUtil已经将开启的WebSocket已经缓存.所以我们也可以这样发消息:
/**
* 如果url的WebSocket已经打开,可以直接调用这个发送消息.
*
* @param url
* @param msg
*/
public void send(String url, String msg) {
WebSocket webSocket = webSocketMap.get(url);
if (webSocket != null) {
webSocket.send(msg);
} else {
throw new IllegalStateException("The WebSokcet not open");
}
}
/**
* 如果url的WebSocket已经打开,可以直接调用这个发送消息.
*
* @param url
* @param byteString
*/
public void send(String url, ByteString byteString) {
WebSocket webSocket = webSocketMap.get(url);
if (webSocket != null) {
webSocket.send(byteString);
} else {
throw new IllegalStateException("The WebSokcet not open");
}
}
当指定的URL的WebSocket没有打开会直接报错.
异步发送消息到服务端
/**
* 不用关心url 的WebSocket是否打开,可以直接发送
*
* @param url
* @param msg
*/
public void asyncSend(String url, final String msg) {
getWebSocket(url)
.first()
.subscribe(new Action1<WebSocket>() {
@Override
public void call(WebSocket webSocket) {
webSocket.send(msg);
}
});
}
/**
* 不用关心url 的WebSocket是否打开,可以直接发送
*
* @param url
* @param byteString
*/
public void asyncSend(String url, final ByteString byteString) {
getWebSocket(url)
.first()
.subscribe(new Action1<WebSocket>() {
@Override
public void call(WebSocket webSocket) {
webSocket.send(byteString);
}
});
}
