nodeos 运行参数翻译
2018-04-26 本文已影响58人
剑有偏锋
./nodeos -h
Application Options:
Config Options for eosio::account_history_plugin:
-f [ --filter_on_accounts ] arg Track only transactions whose scopes
involve the listed accounts. Default is
to track all transactions.
=》只跟踪其范围涉及所列帐户的交易。默认是跟踪所有交易。
--get-transactions-time-limit arg (=3)
Limits the maximum time (in
milliseconds) processing a single
get_transactions call.
=》处理一个get_transactions 调用的最大时间（毫秒）
Config Options for eosio::chain_plugin:
--genesis-json arg (="genesis.json") File to read Genesis State from
=》读取创世状态文件的路径
--genesis-timestamp arg override the initial timestamp in the
Genesis State file
=》覆盖覆盖创世状态文件中的初始时间戳
--block-log-dir arg (="blocks") the location of the block log (absolute
path or relative to application data
dir)
=》块日志的位置（绝对路径或相对于应用程序数据目录）
-c [ --checkpoint ] arg Pairs of [BLOCK_NUM,BLOCK_ID] that
should be enforced as checkpoints.
=》应该作为检查点执行的[BLOCK_NUM，BLOCK_ID]对。
--max-reversible-block-time arg (=-1) Limits the maximum time (in
milliseconds) that a reversible block
is allowed to run before being
considered invalid
=》限制可逆块在被认为无效之前允许运行的最长时间（以毫秒为单位）
--max-pending-transaction-time arg (=-1)
Limits the maximum time (in
milliseconds) that is allowed a pushed
transaction's code to execute before
being considered invalid
=》限制被推送事务的代码在被视为无效之前执行的最大时间（以毫秒为单位）
--max-deferred-transaction-time arg (=20)
Limits the maximum time (in
milliseconds) that is allowed a to push
deferred transactions at the start of a
block
=》限制允许a在块开始时推送延期交易的最长时间（以毫秒为单位）
--wasm-runtime wavm/binaryen Override default WASM runtime
=》覆盖默认的WASM运行时
Command Line Options for eosio::chain_plugin:
--replay-blockchain clear chain database and replay all
blocks
=》清除链式数据库并重放所有块
--resync-blockchain clear chain database and block log
=》清除链式数据库和块日志
--skip-transaction-signatures Disable transaction signature
verification. ONLY for TESTING.
=》禁用交易签名验证。（仅供测试）
Config Options for eosio::faucet_testnet_plugin:
--faucet-create-interval-ms arg (=1000)
Time to wait, in milliseconds, between
creating next faucet created account.
=》在创建下一个龙头创建的帐户之间等待的时间（以毫秒为单位）。
--faucet-name arg (=faucet) Name to use as creator for faucet
created accounts.
=》用作水龙头创建帐户的创建者名称。
--faucet-private-key arg (=["EOS6MRyAjQq8ud7hVNYcfnVPJqcVpscN5So8BhtHuGYqET5GDW5CV","5KQwrPbwdL6PhXujxW37FSSQZ1JiwsST4cqQzDeyXtP79zkvFD3"])
[public key, WIF private key] for
signing for faucet creator account
=》签署水龙头创建者账户[公钥，私钥]。
Config Options for eosio::http_plugin:
--http-server-address arg (=127.0.0.1:8888)
The local IP and port to listen for
incoming http connections.
=》侦听传入的http连接的本地IP和端口
--access-control-allow-origin arg Specify the Access-Control-Allow-Origin
to be returned on each request.
=》指定每个请求返回的Access-Control-Allow-Origin。
--access-control-allow-headers arg Specify the Access-Control-Allow-Header
s to be returned on each request.
=》指定要在每个请求上返回的Access-Control-Allow-Headers。
--access-control-allow-credentials Specify if Access-Control-Allow-Credent
ials: true should be returned on each
request.
=》指定Access-Control-Allow-Credentials：每个请求上应该返回true.
Config Options for eosio::mongo_db_plugin:
-q [ --mongodb-queue-size ] arg (=256)
The queue size between nodeos and
MongoDB plugin thread.
=》nodeos和MongoDB插件线程之间的队列大小。
-m [ --mongodb-uri ] arg MongoDB URI connection string, see:
https://docs.mongodb.com/master/referen
ce/connection-string/. If not specified
then plugin is disabled. Default
database 'EOS' is used if not specified
in URI.
=》MongoDB URI连接字符串，请参阅：https://docs.mongodb.com/master/reference/connection-string /。如果未指定，则插件被禁用。如果未在URI中指定，则使用缺省数据库'EOS'。
Config Options for eosio::net_plugin:
--p2p-listen-endpoint arg (=0.0.0.0:9876)
The actual host:port used to listen for
incoming p2p connections.
=》用于监听传入p2p连接的实际主机：端口。
--p2p-server-address arg An externally accessible host:port for
identifying this node. Defaults to
p2p-listen-endpoint.
=》外部可访问的主机:端口用于识别此节点。默认为p2p-listen-endpoint。
--p2p-peer-address arg The public endpoint of a peer node to
connect to. Use multiple
p2p-peer-address options as needed to
compose a network.
=》连接到对等节点的公共端点。根据需要使用多个p2p-peer-address选项来组成网络。
--agent-name arg (="EOS Test Agent") The name supplied to identify this node
amongst the peers.
=》提供的名称用于标识同级中的此节点。
--allowed-connection arg (=any) Can be 'any' or 'producers' or
'specified' or 'none'. If 'specified',
peer-key must be specified at least
once. If only 'producers', peer-key is
not required. 'producers' and
'specified' may be combined.
=》可以是“any”或“producers”或“specified”或“none”。如果'specified'，对等密钥必须至少指定一次。如果只有'producers'，对等密钥不是必需的。 'producers'和'specified'可以合并。
--peer-key arg Optional public key of peer allowed to
connect. May be used multiple times.
=》允许连接的对等体的可选公钥。可能会多次使用。
--peer-private-key arg Tuple of [PublicKey, WIF private key]
(may specify multiple times)
=》允许连接的对等体的可选公钥（可多次定义）
--log-level-net-plugin arg (=info) Log level: one of 'all', 'debug',
'info', 'warn', 'error', or 'off'
=》日志等级，可以几个之一 'all', 'debug',
'info', 'warn', 'error', 'off'
--max-clients arg (=25) Maximum number of clients from which
connections are accepted, use 0 for no
limit
=》从中接受连接的最大客户端数量，使用0表示无限制
--connection-cleanup-period arg (=30) number of seconds to wait before
cleaning up dead connections
=》清理死连接之前要等待的秒数
--network-version-match arg (=0) True to require exact match of peer
network version.
=》如为真，则要求对等网络版本的精确匹配。
--sync-fetch-span arg (=100) number of blocks to retrieve in a chunk
from any individual peer during
synchronization
=》在同步过程中从任何单个对等体的块中检索的块数
Config Options for eosio::producer_plugin:
-e [ --enable-stale-production ] Enable block production, even if the
chain is stale.
=》启用块生产，即使链是陈旧的。
--required-participation arg (=33) Percent of producers (0-100) that must
be participating in order to produce
blocks
=》要求产生的区块时，生产者必须达到的参与百分比 (0-100)
-p [ --producer-name ] arg ID of producer controlled by this node
(e.g. inita; may specify multiple
times)
=》由该节点控制的生产者的ID（例如，inita;可以指定多次）
--private-key arg (=["EOS6MRyAjQq8ud7hVNYcfnVPJqcVpscN5So8BhtHuGYqET5GDW5CV","5KQwrPbwdL6PhXujxW37FSSQZ1JiwsST4cqQzDeyXtP79zkvFD3"])
Tuple of [public key, WIF private key]
(may specify multiple times)
=》公私钥对(可重复定义)
Config Options for eosio::wallet_plugin:
--wallet-dir arg (=".") The path of the wallet files (absolute
path or relative to application data
dir)
=》钱包文件的路径（绝对路径或相对于应用程序数据目录）
--unlock-timeout arg Timeout for unlocked wallet in seconds.
Wallets will automatically lock after
specified number of seconds of
inactivity. Activity is defined as any
wallet command e.g. list-wallets.
=》
在几秒钟内解锁钱包超时。在指定秒数的不活动之后，钱包将自动锁定。活动被定义为任何钱包命令，例如list-wallets
--eosio-key arg eosio key that will be imported
automatically when a wallet is created.
=》将在创建钱包时自动导入的eosio密钥。
Application Config Options:
--plugin arg Plugin(s) to enable, may be specified
multiple times
=》指定要启用的插件，可定义多测
Application Command Line Options:
-h [ --help ] Print this help message and exit.
=》打印帮助信息并推测
-v [ --version ] Print version information.
=》打印版本信息
--print-default-config Print default configuration template
=》打印默认配置模板
-d [ --data-dir ] arg Directory containing program runtime
data
=》
--config-dir arg Directory containing configuration
files such as config.ini
=》包含程序运行时数据的目录
-c [ --config ] arg (=config.ini) Configuration file name relative to
config-dir
=》相对于config-dir的配置文件名称
-l [ --logconf ] arg (=logging.json) Logging configuration file name/path
for library users
=》记录库用户的配置文件名称/路径
