A2019 for Linux（CentOS）安装备忘
2020-02-26 本文已影响0人
RPA_DORAEMON
A2019.10(build 2545)目前支持CentOS7.x和RHE7.x。
1.安装CentOS 7.7。
2.给用户附加sudo权限
[xxx@192] su
[xxx@192] usermod -aG wheel your_user_id
[xxx@192] Log out and back in again
3.安装sql server for linux
[xxx@192]curl https://packages.microsoft.com/config/rhel/7/mssql-server-2017.repo > /etc/yum.repos.d/mssql-[xxx@192]server.repo
yum install mssql-server
。。。
./mssql-conf setup
配置过程：略
4.安装A2019
基本上一路回车差不多就完成了。过程还算顺利，只是刚开始虚机硬件不达标导致启动失败。后续扩容后手动启动了一遍服务。。。以下是全过程log。
[xxx@192]sudo ./AutomationAnywhereEnterprise_A2019_el7_2545.bin
[root@192 Downloads]# sudo ./AutomationAnywhereEnterprise_A2019_el7_2545.bin
Preparing to install
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
===============================================================================
Automation Anywhere Enterprise (created with InstallAnywhere)
-------------------------------------------------------------------------------
Preparing CONSOLE Mode Installation...
===============================================================================
Checking Installation Prerequisite
----------------------------------
** Storage **
Min Required (500GB) Available (26GB)
** Memory **
Min Required (16GB) Available (3GB)
** Processor **
Min Required (8) Available (1)
This system does not meet all the installation prerequisites for Automation
Anywhere Enterprise. Some features may not work as expected after
installation.
Do you want to continue with the installation?
->1- Continue
2- Cancel
ENTER THE NUMBER OF THE DESIRED CHOICE, OR PRESS <ENTER> TO ACCEPT THE
DEFAULT: 1
===============================================================================
Installing Dependencies
Please Wait
-----------
===============================================================================
Configure Database Utility
Please Wait
-----------
===============================================================================
Introduction
------------
Setup Wizard will guide you through the installation of Automation Anywhere
Enterprise.
It is strongly recommended that you quit all programs before continuing with
this installation.
Respond to each prompt to proceed to the next step in the installation. If
you want to change something on a previous step, type 'back'.
You may cancel this installation at any time by typing 'quit'.
PRESS <ENTER> TO CONTINUE:
===============================================================================
License Agreement
-----------------
Installation and Use of Automation Anywhere Enterprise Requires Acceptance of
the Following License Agreement:
Automation Anywhere Enterprise License Agreement
Important: This is a legal agreement (the �License Agreement�) between you and
Automation Anywhere, Inc. (the �Company�) that states the terms that govern
your use of the Company�s software. Please read this License Agreement
carefully before pressing the �Agree� button. By pressing �Agree,� you agree
to be bound by the terms of this License Agreement. If you do not agree, press
�Cancel,� in which case you may not use the software.
By agreeing to this License Agreement, you represent that you have full power,
capacity and authority to accept the terms of this License Agreement. If you
are accepting the terms of this License Agreement on behalf of your employer
or another entity, you represent that you have full legal authority to bind
your employer or such other entity to this License Agreement. If you wish to
include an Affiliate to order the Software (defined in section 1.1) under the
terms of this Agreement, you may do so. That authorized Affiliate will be
authorized to purchase for that order only, and you will be jointly and
severally liable with the Affiliate for its use of the Software and compliance
with the License Agreement. �Affiliate� means an entity that you control,
controls you, or is under common control with you.
1. Grant of License for Registered Users; Payment of License Fee.
1.1 Subject to the terms and conditions of this License Agreement, (including
payment of all applicable license and / or other fees), the Company grants you
PRESS ANY KEY TO CONTINUE TO READ LICENSE AGREEMENT OR PRESS '0' to ADVANCE
TO END: 0
DO YOU ACCEPT THE TERMS OF THIS LICENSE AGREEMENT? (Y/N): y
===============================================================================
TLS Configuration
-----------------
Control Room HTTP Port
HTTP Port (Default: 80):
===============================================================================
TLS Configuration
-----------------
Control Room HTTPS Port
HTTPS Port (Default: 443):
===============================================================================
TLS Configuration
-----------------
Self Signed Certificate
->1- Enable
2- Disable
ENTER THE NUMBER FOR YOUR CHOICE, OR PRESS <ENTER> TO ACCEPT THE DEFAULT: 1
===============================================================================
TLS Configuration
-----------------
Force HTTP Traffic To HTTPS
->1- Disable
2- Enable
ENTER THE NUMBER FOR YOUR CHOICE, OR PRESS <ENTER> TO ACCEPT THE DEFAULT: 1
===============================================================================
Cluster Configuration
---------------------
Cluster Setup
->1- Disable
2- Enable
ENTER THE NUMBER FOR YOUR CHOICE, OR PRESS <ENTER> TO ACCEPT THE DEFAULT:
===============================================================================
Database Configuration
----------------------
Database Server
Server (Default: localhost):
===============================================================================
Database Configuration
----------------------
Database Port
Port (Default: 1433):
===============================================================================
Database Configuration
----------------------
Control Room Database
Database Name (Default: AAE-Database):
===============================================================================
Database Configuration
----------------------
SQL Server Login
Login ID : sa
===============================================================================
Database Configuration
----------------------
SQL Server Password
Please Enter the Password:
===============================================================================
Database Configuration
----------------------
Secure Connection
->1- Disable
2- Enable
ENTER THE NUMBER FOR YOUR CHOICE, OR PRESS <ENTER> TO ACCEPT THE DEFAULT:
===============================================================================
Verifying SQL Server connection
Please Wait
-----------
===============================================================================
Pre-Installation Summary
------------------------
Please Review the Following Before Continuing:
Product Name:
Automation Anywhere Enterprise
Install Folder:
/opt/automationanywhere/enterprise
Database Server
localhost
Database Port
1433
Control Room Database
AAE-Database
Control Room HTTP Port
80
Control Room HTTPS Port
443
Disk Space Information (for Installation Target):
Required: 3.47 GigaBytes
Available: 25.38 GigaBytes
PRESS <ENTER> TO CONTINUE:
===============================================================================
Ready To Install
----------------
Ready to install Automation Anywhere Enterprise onto your system at the
following location:
/opt/automationanywhere/enterprise
PRESS <ENTER> TO INSTALL:
===============================================================================
Installing...
-------------
[==================|==================|==================|==================]
[------------------|------------------|------------------|----------------
Message from syslogd@192 at Feb 25 07:49:51 ...
kernel:NMI watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [ksoftirqd/0:6]
--]
===============================================================================
Starting Self Sign Certificate Process
Please Wait
-----------
===============================================================================
Creating Control Room Database
Please Wait
-----------
===============================================================================
Encrypting Database Password
Please Wait
-----------
===============================================================================
Creating Control Room Database Tables
Please Wait
-----------
===============================================================================
Cleaning Up Logs
Please Wait
-----------
===============================================================================
Creating Service Users And Group
Please Wait
-----------
===============================================================================
Automation Anywhere Elasticsearch Service Configuration
Please Wait
-----------
===============================================================================
Starting Automation Anywhere Elasticsearch Service
Please Wait
-----------
===============================================================================
Starting Automation Anywhere Control Room Caching Service
Please Wait
-----------
===============================================================================
Starting Control Room Service
Please Wait
-----------
===============================================================================
Starting Control Room Bot Compiler Service
Please Wait
-----------
===============================================================================
Starting Control Room Reverse Proxy Service
Please Wait
-----------
===============================================================================
Starting Automation Anywhere Control Room Messaging Service
Please Wait
-----------
===============================================================================
Finalizing Automation Anywhere Enterprise Services which may take 5 minutes
Please Wait
-----------
===============================================================================
Installation Complete
---------------------
Congratulations. Automation Anywhere Enterprise has been successfully
installed to:
/opt/automationanywhere/enterprise
PRESS <ENTER> TO EXIT THE INSTALLER:
其他：确认服务启动状况/启动服务，服务启动顺序不限。
[xxx@192]sudo systemctl status controlroomcaching.service
[xxx@192]sudo systemctl start controlroomcaching.service
image.png
启动后默认是设置路径如下：
image.png
====Update
安装完毕后发现忘记打开端口了，导致外部环境无法访问。。。
root@192 ~]# systemctl stop firewalld.service
或者
[root@192 ~]# firewall-cmd --zone=public --add-port=80/tcp --permanent
success
...........
[root@192 ~]# systemctl restart firewalld.service
## 或者
[root@192 ~]# firewall-cmd --reload
