多线程之3-OperationQueue

2021-11-23 本文已影响0人栋柠柒

Operation基于GCD封装, 完全面向对象. 对应于GCD, Operation也有任务和队列的概念, 只不过在Operation中任务(block)被称为操作(operation).
Operation支持以下关键功能:

1.操作之间添加依赖
2.使用KVO监听操作的执行状态
3.对操作进行优先级排序
4.取消操作

在GCD中, 任务代码只能写在block中, 并且需要放到队列(dispatch queue)中去执行.
在Operation中, 操作对象可以单独执行, 也可以添加到队列 (operation queue)去执行.

Operation是一个抽象类, 代表一个任务. 通常我们使用它的子类NSInvocationOperation或NSBlockOperation来编写任务代码. 当然也可以直接使用Operation, 不过需要重写main方法, 在main里面编写任务代码.

1.创建方式

NSInvocationOperation (swift不支持): 此类调用选择器方法(selector), 在方法里面编写任务代码.
BlockOperation : 此类采用block方式, 在block中编写任务代码.
Operation: 需要继承Operation建立子类，重写main方法, 在main里面编写任务代码.

2.执行方式

不添加到队列, 手动调用operation的start方法.
添加到队列, 系统自动调用start方法.

3.同步异步

Operation 没有 GCD 中的sync 和 async 方法。
苹果文档
如果计划手动执行操作对象，而不是将其添加到队列中，则可以将操作设计为以同步或异步方式执行。默认情况下，操作对象是同步的。当start()直接从代码中调用同步操作的方法时，该操作将在当前线程中立即执行。
默认情况下，操作对象以同步方式执行-也就是说，它们在调用其start方法的线程中执行其任务。
为了获得最佳性能，您应该将操作设计为尽可能异步，使应用程序在执行操作时可以自由地做其他工作。

如果不使用OperationQueue, operation默认以同步方式执行. 但我们有办法使之异步执行: 新建一个新线程, 然后在新线程里面调用start方法.
如果使用OperationQueue, 系统默认以异步方式执行. 但我们可以使用waitUntilAllOperationsAreFinished 进行等待, 以确保操作完成后才继续往下执行.

4.队列（OperationQueue）

队列 (Operation Queue)有两种: 主队列和非主队列 (自定义队列).

主队列通过OperationQueue.main获得, 主队列里的任务都是放到主线程执行 (不包括使用addExecutionBlock:添加的额外操作, 因其可能在其他线程执行).
非主队列 (自定义队列) 即一般 .init 出来的队列, 默认在子线程中异步执行. 通多设置最大并发数(maxConcurrentOperationCount)来控制队列是串行还是并发.

添加操作(任务)到队列有四种方式:

addOperation: 添加一个现有的Operation (或者其子类).
addOperations:waitUntilFinished: 可添加多个现有的Operation (或者其子类), 可设置等待所有操作完成后方可继续往下执行.
addOperationWithBlock: 直接添加一个block
addBarrierBlock: 添加栅栏, 顺带一个任务. 等栅栏前的所有任务都执行完, 再执行本栅栏的任务, 起到隔离同步等待的目的.

5.串行并行

主队列是串行队列. 自定义队列默认是并发队列, 但可通多设置最大并发数(maxConcurrentOperationCount)来控制队列是串行还是并发.

maxConcurrentOperationCount

-1, 默认值, 并发队列;
=0, 不执行任何操作;
=1, 串行队列;
<0, 除-1默认值外, 其他负值均报错;
>1, 并发队列, 如果数值过大, 最终并发数由系统决定.

6.基本用法

1.不使用 OperationQueue

// block operation
let blockOperation = BlockOperation {
            for _ in 0...3 {
                print("blockOperation:\(Thread.current)")
            }
        }
        blockOperation.start()

//Operation
class CustomOperation: Operation {
    override func main() {
        print("\(#function), thread:\(Thread.current)")
    }
}

在自定义Operation中, 调用start方法后, 系统会执行多项安全检查, 最终会调用main方法.

2.使用 OperationQueue

let operationQueue = OperationQueue() // 默认并发执行
        let blockOperation = BlockOperation {
            for _ in 0...3 {
                print("blockOperation:\(Thread.current)")
            }
        }
        let blockOperationItem = BlockOperation {
            for _ in 0...3 {
                print("blockOperationItem:\(Thread.current)")
            }
        }
        operationQueue.addOperation(blockOperation)
        operationQueue.addOperation(blockOperationItem)

blockOperationItem:<NSThread: 0x600001d8e400>{number = 3, name = (null)}
blockOperation:<NSThread: 0x600001d98080>{number = 6, name = (null)}
blockOperation:<NSThread: 0x600001d98080>{number = 6, name = (null)}
blockOperationItem:<NSThread: 0x600001d8e400>{number = 3, name = (null)}
blockOperation:<NSThread: 0x600001d98080>{number = 6, name = (null)}
blockOperationItem:<NSThread: 0x600001d8e400>{number = 3, name = (null)}
blockOperation:<NSThread: 0x600001d98080>{number = 6, name = (null)}
blockOperationItem:<NSThread: 0x600001d8e400>{number = 3, name = (null)}

设置最大并发数

let operationQueue = OperationQueue() // 默认并发执行
        operationQueue.maxConcurrentOperationCount = 1
        let blockOperation = BlockOperation {
            for _ in 0...3 {
                print("blockOperation:\(Thread.current)")
            }
        }
        let blockOperationItem = BlockOperation {
            for _ in 0...3 {
                print("blockOperationItem:\(Thread.current)")
            }
        }
        operationQueue.addOperation(blockOperation)
        operationQueue.addOperation(blockOperationItem)

blockOperation:<NSThread: 0x6000021b4a00>{number = 3, name = (null)}
blockOperation:<NSThread: 0x6000021b4a00>{number = 3, name = (null)}
blockOperation:<NSThread: 0x6000021b4a00>{number = 3, name = (null)}
blockOperation:<NSThread: 0x6000021b4a00>{number = 3, name = (null)}
blockOperationItem:<NSThread: 0x6000021faac0>{number = 4, name = (null)}
blockOperationItem:<NSThread: 0x6000021faac0>{number = 4, name = (null)}
blockOperationItem:<NSThread: 0x6000021faac0>{number = 4, name = (null)}
blockOperationItem:<NSThread: 0x6000021faac0>{number = 4, name = (null)}

7.添加依赖

addDependency

let operationQueue = OperationQueue() // 默认并发执行
        operationQueue.maxConcurrentOperationCount = 1
        let blockOperation = BlockOperation {
            for _ in 0...3 {
                print("blockOperation:\(Thread.current)")
            }
        }
        let blockOperationItem = BlockOperation {
            for _ in 0...3 {
                print("blockOperationItem:\(Thread.current)")
            }
        }
        let blockOperationItem2 = BlockOperation {
            print("blockOperationItem2:\(Thread.current)")
        }
        blockOperationItem2.addDependency(blockOperationItem)
        operationQueue.addOperation(blockOperation)
        operationQueue.addOperation(blockOperationItem)
        operationQueue.addOperation(blockOperationItem2)

8.设置优先级

public enum QueuePriority : Int {

        case veryLow = -8

        case low = -4

        case normal = 0

        case high = 4

        case veryHigh = 8
    }

let operationQueue = OperationQueue() // 默认并发执行
        operationQueue.maxConcurrentOperationCount = 2
        let blockOperation = BlockOperation {
            for _ in 0...3 {
                print("blockOperation:\(Thread.current)")
            }
        }
        let blockOperationItem = BlockOperation {
            for _ in 0...3 {
                print("blockOperationItem:\(Thread.current)")
            }
        }
        let blockOperationItem2 = BlockOperation {
            print("blockOperationItem2:\(Thread.current)")
        }
        blockOperationItem2.addDependency(blockOperationItem)
        blockOperationItem.queuePriority = .veryHigh
        blockOperation.queuePriority = .low
        operationQueue.addOperation(blockOperation)
        operationQueue.addOperation(blockOperationItem)
        operationQueue.addOperation(blockOperationItem2)

blockOperationItem:<NSThread: 0x6000032979c0>{number = 6, name = (null)}
blockOperation:<NSThread: 0x600003298100>{number = 4, name = (null)}
blockOperation:<NSThread: 0x600003298100>{number = 4, name = (null)}
blockOperation:<NSThread: 0x600003298100>{number = 4, name = (null)}
blockOperation:<NSThread: 0x600003298100>{number = 4, name = (null)}
blockOperationItem:<NSThread: 0x6000032979c0>{number = 6, name = (null)}
blockOperationItem:<NSThread: 0x6000032979c0>{number = 6, name = (null)}
blockOperationItem:<NSThread: 0x6000032979c0>{number = 6, name = (null)}
blockOperationItem2:<NSThread: 0x6000032979c0>{number = 6, name = (null)}

9. 通过addExecutionBlock方法添加block操作

let operationQueue = OperationQueue() // 默认并发执行
        operationQueue.maxConcurrentOperationCount = 2
        let blockOperation = BlockOperation {
            for _ in 0...3 {
                print("blockOperation:\(Thread.current)")
            }
        }
        let blockOperationItem = BlockOperation {
            for _ in 0...3 {
                print("blockOperationItem:\(Thread.current)")
            }
        }
        blockOperationItem.addExecutionBlock {
            for _ in 0...2 {
                print("blockOperationItem addExecutionBlock:\(Thread.current)")
            }
        }
        operationQueue.addOperation(blockOperation)
        operationQueue.addOperation(blockOperationItem)

blockOperation:<NSThread: 0x6000028be9c0>{number = 7, name = (null)}
blockOperationItem:<NSThread: 0x6000028be700>{number = 5, name = (null)}
blockOperationItem addExecutionBlock:<NSThread: 0x6000028c4100>{number = 6, name = (null)}
blockOperationItem addExecutionBlock:<NSThread: 0x6000028c4100>{number = 6, name = (null)}
blockOperationItem addExecutionBlock:<NSThread: 0x6000028c4100>{number = 6, name = (null)}
blockOperationItem:<NSThread: 0x6000028be700>{number = 5, name = (null)}
blockOperation:<NSThread: 0x6000028be9c0>{number = 7, name = (null)}
blockOperationItem:<NSThread: 0x6000028be700>{number = 5, name = (null)}
blockOperation:<NSThread: 0x6000028be9c0>{number = 7, name = (null)}
blockOperationItem:<NSThread: 0x6000028be700>{number = 5, name = (null)}
blockOperation:<NSThread: 0x6000028be9c0>{number = 7, name = (null)}

可以看到，通过addExecutionBlock 方法添加的代码块是在blockOperationItem开始执行之后，另外开辟了一条新线程执行的。