macvlan 虚拟技术的 bridge 模式

2021-07-28  本文已影响0人  Jamza

macvlan 虚拟技术的 bridge 模式

macvlan 是 Linux 操作系统内核提供的网络虚拟化方案之一，是网卡虚拟化解决方案。macvlan 可以将一张物理网卡设置多个 mac 地址，相当于将物理网卡实施分身术，要求物理网卡打开混杂模式。针对每个 mac 地址，都可以设置 IP 地址。因此，本来是一块物理网卡连接到交换机，现在可以是多块虚拟网卡连接到交换机了。

macvlan 并不创建网络，只是创建虚拟网卡，而通过 macvlan 虚拟出多个虚拟网卡，目的是在多租户场景下，在统一的底层网络基础上，单独为每一个租户虚拟出自己的网络，从而实现网络隔离的目的。

物理网卡设置混杂模式

对于物理网络，需要打开混杂模式。在打开混杂模式之前，eth0 接口，状态为：<BROADCAST,MULTICAST,UP,LOWER_UP>

[root@vac_master0 ~]# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 52:54:83:aa:bb:00 brd ff:ff:ff:ff:ff:ff
3: eth20: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 52:54:83:aa:bb:20 brd ff:ff:ff:ff:ff:ff
4: eth21: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 52:54:83:aa:bb:21 brd ff:ff:ff:ff:ff:ff
5: docker0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT
    link/ether 02:42:02:92:51:fa brd ff:ff:ff:ff:ff:ff
6: docker_gwbridge: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT
    link/ether 02:42:9f:6e:6a:5d brd ff:ff:ff:ff:ff:ff
60: vethe5c91d3@if59: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master docker0 state UP mode DEFAULT
    link/ether c6:8b:1b:b9:1f:fd brd ff:ff:ff:ff:ff:ff link-netnsid 0
[root@vac_master0 ~]#

通过命令，打开混杂模式，eth0 端口状态为 <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP>，多出来的 PROMISC 表示已经打开混杂模式：

[root@vac_master0 ~]# ifconfig eth0 promisc
[root@vac_master0 ~]#
[root@vac_master0 ~]# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 52:54:83:aa:bb:00 brd ff:ff:ff:ff:ff:ff
3: eth20: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 52:54:83:aa:bb:20 brd ff:ff:ff:ff:ff:ff
4: eth21: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 52:54:83:aa:bb:21 brd ff:ff:ff:ff:ff:ff
5: docker0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT
    link/ether 02:42:02:92:51:fa brd ff:ff:ff:ff:ff:ff
6: docker_gwbridge: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT
    link/ether 02:42:9f:6e:6a:5d brd ff:ff:ff:ff:ff:ff
60: vethe5c91d3@if59: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master docker0 state UP mode DEFAULT
    link/ether c6:8b:1b:b9:1f:fd brd ff:ff:ff:ff:ff:ff link-netnsid 0
[root@vac_master0 ~]#

如果需要关闭混杂模式，执行以下命令：

[root@vac_master0 ~]# ifconfig eth0 -promisc
[root@vac_master0 ~]#
[root@vac_master0 ~]# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 52:54:83:aa:bb:00 brd ff:ff:ff:ff:ff:ff
3: eth20: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 52:54:83:aa:bb:20 brd ff:ff:ff:ff:ff:ff
4: eth21: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 52:54:83:aa:bb:21 brd ff:ff:ff:ff:ff:ff
5: docker0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT
    link/ether 02:42:02:92:51:fa brd ff:ff:ff:ff:ff:ff
6: docker_gwbridge: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT
    link/ether 02:42:9f:6e:6a:5d brd ff:ff:ff:ff:ff:ff
60: vethe5c91d3@if59: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master docker0 state UP mode DEFAULT
    link/ether c6:8b:1b:b9:1f:fd brd ff:ff:ff:ff:ff:ff link-netnsid 0
[root@vac_master0 ~]#

内核加载 macvlan 驱动模块

macvlan 是 Linux 内核提供的一种网络驱动类型。如果内核没有加载 macvlan，可以通过命令加载：

[root@vac_master0 ~]# lsmod | grep macvlan
[root@vac_master0 ~]#
[root@vac_master0 ~]# modprobe macvlan
[root@vac_master0 ~]#
[root@vac_master0 ~]# lsmod | grep macvlan
macvlan                19233  0
[root@vac_master0 ~]#

如果卸载 macvlan，可以执行以下命令：

[root@vac_master0 ~]# lsmod | grep macvlan
macvlan                19233  0
[root@vac_master0 ~]#
[root@vac_master0 ~]# modprobe -r macvlan
[root@vac_master0 ~]#
[root@vac_master0 ~]# lsmod | grep macvlan
[root@vac_master0 ~]#

创建配置 macvlan 网络

创建两个虚拟网卡，macvlan 模式：

[root@vac_master0 ~]# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 52:54:83:aa:bb:00 brd ff:ff:ff:ff:ff:ff
3: eth20: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 52:54:83:aa:bb:20 brd ff:ff:ff:ff:ff:ff
4: eth21: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 52:54:83:aa:bb:21 brd ff:ff:ff:ff:ff:ff
5: docker0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT
    link/ether 02:42:02:92:51:fa brd ff:ff:ff:ff:ff:ff
6: docker_gwbridge: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT
    link/ether 02:42:9f:6e:6a:5d brd ff:ff:ff:ff:ff:ff
60: vethe5c91d3@if59: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master docker0 state UP mode DEFAULT
    link/ether c6:8b:1b:b9:1f:fd brd ff:ff:ff:ff:ff:ff link-netnsid 0
[root@vac_master0 ~]#
[root@vac_master0 ~]# ip link add link eth0 name eth0.01 type macvlan mode bridge
[root@vac_master0 ~]# ip link add link eth0 name eth0.02 type macvlan mode bridge
[root@vac_master0 ~]#
[root@vac_master0 ~]# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 52:54:83:aa:bb:00 brd ff:ff:ff:ff:ff:ff
3: eth20: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 52:54:83:aa:bb:20 brd ff:ff:ff:ff:ff:ff
4: eth21: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 52:54:83:aa:bb:21 brd ff:ff:ff:ff:ff:ff
5: docker0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT
    link/ether 02:42:02:92:51:fa brd ff:ff:ff:ff:ff:ff
6: docker_gwbridge: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT
    link/ether 02:42:9f:6e:6a:5d brd ff:ff:ff:ff:ff:ff
60: vethe5c91d3@if59: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master docker0 state UP mode DEFAULT
    link/ether c6:8b:1b:b9:1f:fd brd ff:ff:ff:ff:ff:ff link-netnsid 0
61: eth0.01@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000
    link/ether 3e:fc:ba:a6:af:68 brd ff:ff:ff:ff:ff:ff
62: eth0.02@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000
    link/ether ba:ea:35:91:37:2a brd ff:ff:ff:ff:ff:ff
[root@vac_master0 ~]#

可以看出，多出了两个虚拟网卡，名称分别为 eth0.01@eth0 与 eth0.02@eth0，但是虚拟网卡的状态没有 UP，需要激活虚拟网卡：

[root@vac_master0 ~]# ip link set eth0.01 up
[root@vac_master0 ~]# ip link set eth0.02 up
[root@vac_master0 ~]#
[root@vac_master0 ~]# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 52:54:83:aa:bb:00 brd ff:ff:ff:ff:ff:ff
3: eth20: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 52:54:83:aa:bb:20 brd ff:ff:ff:ff:ff:ff
4: eth21: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 52:54:83:aa:bb:21 brd ff:ff:ff:ff:ff:ff
5: docker0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT
    link/ether 02:42:02:92:51:fa brd ff:ff:ff:ff:ff:ff
6: docker_gwbridge: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT
    link/ether 02:42:9f:6e:6a:5d brd ff:ff:ff:ff:ff:ff
60: vethe5c91d3@if59: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master docker0 state UP mode DEFAULT
    link/ether c6:8b:1b:b9:1f:fd brd ff:ff:ff:ff:ff:ff link-netnsid 0
61: eth0.01@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT qlen 1000
    link/ether 3e:fc:ba:a6:af:68 brd ff:ff:ff:ff:ff:ff
62: eth0.02@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT qlen 1000
    link/ether ba:ea:35:91:37:2a brd ff:ff:ff:ff:ff:ff
[root@vac_master0 ~]#
[root@vac_master0 ~]# ifconfig eth0.01
eth0.01: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet6 fe80::3cfc:baff:fea6:af68  prefixlen 64  scopeid 0x20<link>
        ether 3e:fc:ba:a6:af:68  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 8  bytes 648 (648.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

[root@vac_master0 ~]#
[root@vac_master0 ~]# ifconfig eth0.02
eth0.02: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet6 fe80::b8ea:35ff:fe91:372a  prefixlen 64  scopeid 0x20<link>
        ether ba:ea:35:91:37:2a  txqueuelen 1000  (Ethernet)
        RX packets 2  bytes 168 (168.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 8  bytes 648 (648.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

[root@vac_master0 ~]#

虚拟网卡已经 UP，但是只有 mac 地址，还没有 ip 地址。

创建两个网络命名空间：

[root@vac_master0 ~]# ip netns
[root@vac_master0 ~]#
[root@vac_master0 ~]# ip netns add ns01
[root@vac_master0 ~]# ip netns add ns02
[root@vac_master0 ~]#
[root@vac_master0 ~]# ip netns
ns02
ns01
[root@vac_master0 ~]#

将虚拟网卡 eth0.01 添加到网络命名空间 ns01 中，将虚拟网卡 eth0.02 添加到网络命名空间 ns02 中

[root@vac_master0 ~]# ip link set eth0.01 netns ns01
[root@vac_master0 ~]# ip link set eth0.02 netns ns02
[root@vac_master0 ~]#

给两个虚拟网卡配置 ip 地址：

[root@vac_master0 ~]# ip netns exec ns01 ip addr add 192.168.83.101/24 dev eth0.01
[root@vac_master0 ~]# ip netns exec ns02 ip addr add 192.168.83.102/24 dev eth0.02
[root@vac_master0 ~]#

查看 ip 地址的配置情况，从结果可以看出，只有在命令空间 ns01 中才能看到虚拟网卡 eth0.01，也只有在命令空间 ns02 中才能看到虚拟网卡 eth0.02：

[root@vac_master0 ~]# ifconfig eth0.01
eth0.01: error fetching interface information: Device not found
[root@vac_master0 ~]#
[root@vac_master0 ~]# ifconfig eth0.02
eth0.02: error fetching interface information: Device not found
[root@vac_master0 ~]#
[root@vac_master0 ~]# ip netns exec ns01 ifconfig eth0.01
eth0.01: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        inet 192.168.83.101  netmask 255.255.255.0  broadcast 0.0.0.0
        ether 3e:fc:ba:a6:af:68  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 8  bytes 648 (648.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

[root@vac_master0 ~]#
[root@vac_master0 ~]# ip netns exec ns02 ifconfig eth0.02
eth0.02: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        inet 192.168.83.102  netmask 255.255.255.0  broadcast 0.0.0.0
        ether ba:ea:35:91:37:2a  txqueuelen 1000  (Ethernet)
        RX packets 2  bytes 168 (168.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 8  bytes 648 (648.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

[root@vac_master0 ~]#
[root@vac_master0 ~]# ip netns exec ns01 ifconfig eth0.02
eth0.02: error fetching interface information: Device not found
[root@vac_master0 ~]#
[root@vac_master0 ~]# ip netns exec ns02 ifconfig eth0.01
eth0.01: error fetching interface information: Device not found
[root@vac_master0 ~]#

设置虚拟网卡 up：

[root@vac_master0 ~]# ip netns exec ns01 ip link
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
61: eth0.01@if2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000
    link/ether 3e:fc:ba:a6:af:68 brd ff:ff:ff:ff:ff:ff link-netnsid 0
[root@vac_master0 ~]#
[root@vac_master0 ~]# ip netns exec ns01 ip link set lo up
[root@vac_master0 ~]# ip netns exec ns01 ip link set eth0.01 up
[root@vac_master0 ~]#
[root@vac_master0 ~]# ip netns exec ns01 ifconfig
eth0.01: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.83.101  netmask 255.255.255.0  broadcast 0.0.0.0
        inet6 fe80::3cfc:baff:fea6:af68  prefixlen 64  scopeid 0x20<link>
        ether 3e:fc:ba:a6:af:68  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 16  bytes 1296 (1.2 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

[root@vac_master0 ~]#
[root@vac_master0 ~]# ip netns exec ns02 ip link
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
62: eth0.02@if2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000
    link/ether ba:ea:35:91:37:2a brd ff:ff:ff:ff:ff:ff link-netnsid 0
[root@vac_master0 ~]#
[root@vac_master0 ~]# ip netns exec ns02 ip link set lo up
[root@vac_master0 ~]# ip netns exec ns02 ip link set eth0.02 up
[root@vac_master0 ~]#
[root@vac_master0 ~]#
[root@vac_master0 ~]# ip netns exec ns02 ifconfig
eth0.02: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.83.102  netmask 255.255.255.0  broadcast 0.0.0.0
        inet6 fe80::b8ea:35ff:fe91:372a  prefixlen 64  scopeid 0x20<link>
        ether ba:ea:35:91:37:2a  txqueuelen 1000  (Ethernet)
        RX packets 2  bytes 168 (168.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 15  bytes 1226 (1.1 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

[root@vac_master0 ~]#

PING 测试

ping 宿主 eth0 端口，以及宿主机的网桥端口，macvlan 网络 bridge 模式下，与物理网卡端口无法 ping 通，与交换机网桥可以 ping 通

[root@vac_master0 ~]# ip netns exec ns01 ping 192.168.83.83
PING 192.168.83.83 (192.168.83.83) 56(84) bytes of data.
^Z
[4]+  Stopped                 ip netns exec ns01 ping 192.168.83.83
[root@vac_master0 ~]# ip netns exec ns02 ping 192.168.83.83
PING 192.168.83.83 (192.168.83.83) 56(84) bytes of data.
^Z
[5]+  Stopped                 ip netns exec ns02 ping 192.168.83.83
[root@vac_master0 ~]#
[root@vac_master0 ~]#
[root@vac_master0 ~]# ip netns exec ns01 ping 192.168.83.1
PING 192.168.83.1 (192.168.83.1) 56(84) bytes of data.
64 bytes from 192.168.83.1: icmp_seq=1 ttl=64 time=0.510 ms
64 bytes from 192.168.83.1: icmp_seq=2 ttl=64 time=0.235 ms
64 bytes from 192.168.83.1: icmp_seq=3 ttl=64 time=0.356 ms
^Z
[6]+  Stopped                 ip netns exec ns01 ping 192.168.83.1
[root@vac_master0 ~]#
[root@vac_master0 ~]# ip netns exec ns02 ping 192.168.83.1
PING 192.168.83.1 (192.168.83.1) 56(84) bytes of data.
64 bytes from 192.168.83.1: icmp_seq=1 ttl=64 time=0.287 ms
64 bytes from 192.168.83.1: icmp_seq=2 ttl=64 time=0.219 ms
64 bytes from 192.168.83.1: icmp_seq=3 ttl=64 time=0.377 ms
^Z
[7]+  Stopped                 ip netns exec ns02 ping 192.168.83.1
[root@vac_master0 ~]#

不同命名空间，同物理网卡的虚拟网卡之间，是可以 ping 通的。

[root@vac_master0 ~]# ip netns exec ns02 ping 192.168.83.101
PING 192.168.83.101 (192.168.83.101) 56(84) bytes of data.
64 bytes from 192.168.83.101: icmp_seq=1 ttl=64 time=1.44 ms
64 bytes from 192.168.83.101: icmp_seq=2 ttl=64 time=0.101 ms
64 bytes from 192.168.83.101: icmp_seq=3 ttl=64 time=0.106 ms
64 bytes from 192.168.83.101: icmp_seq=4 ttl=64 time=0.107 ms
^Z
[8]+  Stopped                 ip netns exec ns02 ping 192.168.83.101
[root@vac_master0 ~]#
[root@vac_master0 ~]# ip netns exec ns02 ping 192.168.83.102
PING 192.168.83.102 (192.168.83.102) 56(84) bytes of data.
64 bytes from 192.168.83.102: icmp_seq=1 ttl=64 time=0.041 ms
64 bytes from 192.168.83.102: icmp_seq=2 ttl=64 time=0.103 ms
64 bytes from 192.168.83.102: icmp_seq=3 ttl=64 time=0.051 ms
64 bytes from 192.168.83.102: icmp_seq=4 ttl=64 time=0.099 ms
^Z
[9]+  Stopped                 ip netns exec ns02 ping 192.168.83.102
[root@vac_master0 ~]#
[root@vac_master0 ~]# ip netns exec ns01 ping 192.168.83.102
PING 192.168.83.102 (192.168.83.102) 56(84) bytes of data.
64 bytes from 192.168.83.102: icmp_seq=1 ttl=64 time=0.051 ms
64 bytes from 192.168.83.102: icmp_seq=2 ttl=64 time=0.063 ms
64 bytes from 192.168.83.102: icmp_seq=3 ttl=64 time=0.062 ms
64 bytes from 192.168.83.102: icmp_seq=4 ttl=64 time=0.061 ms
^Z
[10]+  Stopped                 ip netns exec ns01 ping 192.168.83.102
[root@vac_master0 ~]#
[root@vac_master0 ~]# ip netns exec ns01 ping 192.168.83.101
PING 192.168.83.101 (192.168.83.101) 56(84) bytes of data.
64 bytes from 192.168.83.101: icmp_seq=1 ttl=64 time=0.032 ms
64 bytes from 192.168.83.101: icmp_seq=2 ttl=64 time=0.050 ms
64 bytes from 192.168.83.101: icmp_seq=3 ttl=64 time=0.049 ms
64 bytes from 192.168.83.101: icmp_seq=4 ttl=64 time=0.049 ms
^Z
[11]+  Stopped                 ip netns exec ns01 ping 192.168.83.101
[root@vac_master0 ~]#

删除虚拟网卡与网络命名空间

删除虚拟网卡：

[root@vac_master0 ~]# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 52:54:83:aa:bb:00 brd ff:ff:ff:ff:ff:ff
3: eth20: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 52:54:83:aa:bb:20 brd ff:ff:ff:ff:ff:ff
4: eth21: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 52:54:83:aa:bb:21 brd ff:ff:ff:ff:ff:ff
5: docker0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT
    link/ether 02:42:02:92:51:fa brd ff:ff:ff:ff:ff:ff
6: docker_gwbridge: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT
    link/ether 02:42:9f:6e:6a:5d brd ff:ff:ff:ff:ff:ff
60: vethe5c91d3@if59: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master docker0 state UP mode DEFAULT
    link/ether c6:8b:1b:b9:1f:fd brd ff:ff:ff:ff:ff:ff link-netnsid 0
63: eth0.01@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000
    link/ether f2:75:b6:f9:af:5e brd ff:ff:ff:ff:ff:ff
64: eth0.02@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000
    link/ether 76:1c:5a:15:50:35 brd ff:ff:ff:ff:ff:ff
[root@vac_master0 ~]#
[root@vac_master0 ~]# ip link delete eth0.01
[root@vac_master0 ~]# ip link delete eth0.02
[root@vac_master0 ~]#
[root@vac_master0 ~]# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 52:54:83:aa:bb:00 brd ff:ff:ff:ff:ff:ff
3: eth20: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 52:54:83:aa:bb:20 brd ff:ff:ff:ff:ff:ff
4: eth21: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 52:54:83:aa:bb:21 brd ff:ff:ff:ff:ff:ff
5: docker0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT
    link/ether 02:42:02:92:51:fa brd ff:ff:ff:ff:ff:ff
6: docker_gwbridge: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT
    link/ether 02:42:9f:6e:6a:5d brd ff:ff:ff:ff:ff:ff
60: vethe5c91d3@if59: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master docker0 state UP mode DEFAULT
    link/ether c6:8b:1b:b9:1f:fd brd ff:ff:ff:ff:ff:ff link-netnsid 0
[root@vac_master0 ~]#

删除网络命名空间：

[root@vac_master0 ~]# ip netns help
Usage: ip netns list
       ip netns add NAME
       ip netns set NAME NETNSID
       ip [-all] netns delete [NAME]
       ip netns identify [PID]
       ip netns pids NAME
       ip [-all] netns exec [NAME] cmd ...
       ip netns monitor
       ip netns list-id
[root@vac_master0 ~]#
[root@vac_master0 ~]# ip netns
ns02
ns01
[root@vac_master0 ~]#
[root@vac_master0 ~]# ip netns delete ns01
[root@vac_master0 ~]# ip netns delete ns02
[root@vac_master0 ~]#
[root@vac_master0 ~]# ip netns
[root@vac_master0 ~]#
上一篇 下一篇

猜你喜欢

热点阅读