centos下多网卡做bond脚本

2017-10-19  本文已影响33人  think_lonely

centos下多网卡做bond脚本

网卡

多网卡或者单网卡形式下的网卡bonding

#! /bin/sh

#获取当前网卡数

ethnum=`lspci | grep Ethernet | wc -l`

echo $ethnum

#如果网卡数小于等于1则什么都不做

if [ $ethnum -le 1 ]

then

echo "do nothing!"

fi

#如果网卡数大于等于2则

if [ $ethnum -ge 2 ]

then

#-------  添加一个bond0的网卡

echo "DEVICE=bond0" > /etc/sysconfig/network-scripts/ifcfg-bond0

echo "ONBOOT=yes" >> /etc/sysconfig/network-scripts/ifcfg-bond0

echo "IPADDR=192.168.3.104" >> /etc/sysconfig/network-scripts/ifcfg-bond0

echo "NETMASK=255.255.0.0" >> /etc/sysconfig/network-scripts/ifcfg-bond0

echo "GATEWAY=192.168.1.1" >> /etc/sysconfig/network-scripts/ifcfg-bond0

echo "BOOTPROTO=static" >> /etc/sysconfig/network-scripts/ifcfg-bond0

echo "USERCTL=no" >> /etc/sysconfig/network-scripts/ifcfg-bond0

#--------

echo "ifenslave bond0" >> /etc/rc.local

#--------写其他网卡的配置文件

for i in $(seq $ethnum);

do

num=`expr $i - 1`

echo "BOOTPROTO=none" >  /etc/sysconfig/network-scripts/ifcfg-eth$num

echo "DEVICE=eth$num" >>  /etc/sysconfig/network-scripts/ifcfg-eth$num

echo "ONBOOT=yes" >>  /etc/sysconfig/network-scripts/ifcfg-eth$num

echo "MASTER=bond0" >>  /etc/sysconfig/network-scripts/ifcfg-eth$num

echo "USERCTL=no" >>  /etc/sysconfig/network-scripts/ifcfg-eth$num

echo "SLAVE=yes" >>  /etc/sysconfig/network-scripts/ifcfg-eth$num

sed -i 's/ifenslave.*/& eth'"$num"'/g' /etc/rc.local

done;

echo "alias bond0 bonding" > /etc/modprobe.d/modprobe.conf

echo "options bond0 miimon=100 mode=balance-rr" >> /etc/modprobe.d/modprobe.conf

modprobe bonding

/etc/init.d/network  restart

fi

上一篇下一篇

猜你喜欢

热点阅读