ijkplayer 编译备忘,支持x264和https

2018-06-11 本文已影响84人大斜丸

title: IJKPlayer Android编译踩坑
tags: 新建,模板,小书匠
grammar_cjkRuby: true

1. 编译前准备

编译环境说明
- Mac OS X 10.11.5
- Android
- android-ndk-r13b
环境配置：
编辑~/.bash_profile，添加以下环境变量：

export ANDROID_SDK=<your sdk path>
export ANDROID_NDK=<your ndk path>

IJKPlayer相关源码下载：

git clone https://github.com/Bilibili/ijkplayer.git ijkplayer-android
cd ijkplayer-android
git checkout -B latest k0.8.8

./init-android.sh

下载完成后，目录文件夹如下所示：

2. 编译

2.1编译x264

因为用到x264编码，所以需要首先编译出x264库进行使用。

2.1.1.进入ijkplayer主目录，新建init-android-x264.sh文件

脚本如下：

IJK_x264_UPSTREAM=http://git.videolan.org/git/x264.git
IJK_x264_FORK=http://git.videolan.org/git/x264.git

IJK_x264_LOCAL_REPO=extra/x264

set -e
TOOLS=tools

echo "== pull x264 base =="
sh $TOOLS/pull-repo-base.sh $IJK_x264_UPSTREAM $IJK_x264_LOCAL_REPO

function pull_fork()
{
    echo "== pull x264 fork $1 =="
    sh $TOOLS/pull-repo-ref.sh $IJK_x264_FORK android/contrib/x264-$1 ${IJK_x264_LOCAL_REPO}
}

pull_fork "armv5"
pull_fork "armv7a"
pull_fork "arm64"
pull_fork "x86"
pull_fork "x86_64"

运行脚本，在extra目录下多了一个x264目录。

enter description here

在android/contrib下面会生成x264-armv7a等五个文件夹

enter description here

2.1.2 在android/contrib下新建compile-x264.sh 和 tools/do-compile-x264.sh

compile-x264.sh脚本如下：

#! /usr/bin/env bash
#
# Copyright (C) 2013-2014 Zhang Rui <bbcallen@gmail.com>
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

#----------
UNI_BUILD_ROOT=`pwd`
FF_TARGET=$1
set -e
set +x

FF_ACT_ARCHS_32="armv5 armv7a x86"
FF_ACT_ARCHS_64="armv5 armv7a arm64 x86 x86_64"
FF_ACT_ARCHS_ALL=$FF_ACT_ARCHS_64

echo_archs() {
    echo "===================="
    echo "[*] check archs"
    echo "===================="
    echo "FF_ALL_ARCHS = $FF_ACT_ARCHS_ALL"
    echo "FF_ACT_ARCHS = $*"
    echo ""
}

echo_usage() {
    echo "Usage:"
    echo "  compile-x264.sh armv5|armv7a|arm64|x86|x86_64"
    echo "  compile-x264.sh all|all32"
    echo "  compile-x264.sh all64"
    echo "  compile-x264.sh clean"
    echo "  compile-x264.sh check"
    exit 1
}

echo_nextstep_help() {
    #----------
    echo ""
    echo "--------------------"
    echo "[*] Finished"
    echo "--------------------"
    echo "# to continue to build ffmpeg, run script below,"
    echo "sh compile-ffmpeg.sh "
    echo "# to continue to build ijkplayer, run script below,"
    echo "sh compile-ijk.sh "
}

#----------
case "$FF_TARGET" in
    "")
        echo_archs armv7a
        sh tools/do-compile-x264.sh armv7a
    ;;
    armv5|armv7a|arm64|x86|x86_64)
        echo_archs $FF_TARGET
        sh tools/do-compile-x264.sh $FF_TARGET
        echo_nextstep_help
    ;;
    all32)
        echo_archs $FF_ACT_ARCHS_32
        for ARCH in $FF_ACT_ARCHS_32
        do
            sh tools/do-compile-x264.sh $ARCH
        done
        echo_nextstep_help
    ;;
    all|all64)
        echo_archs $FF_ACT_ARCHS_64
        for ARCH in $FF_ACT_ARCHS_64
        do
            sh tools/do-compile-x264.sh $ARCH
        done
        echo_nextstep_help
    ;;
    clean)
        echo_archs FF_ACT_ARCHS_64
        for ARCH in $FF_ACT_ARCHS_ALL
        do
            if [ -d x264-$ARCH ]; then
                cd x264-$ARCH && git clean -xdf && cd -
            fi
        done
        rm -rf ./build/x264-*
    ;;
    check)
        echo_archs FF_ACT_ARCHS_ALL
    ;;
    *)
        echo_usage
        exit 1
    ;;
esac

do-compile-x264.sh 如下：

#! /usr/bin/env bash
#
# Copyright (C) 2014 Miguel Bot髇 <waninkoko@gmail.com>
# Copyright (C) 2014 Zhang Rui <bbcallen@gmail.com>
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

#--------------------
set -e

if [ -z "$ANDROID_NDK" ]; then
    echo "You must define ANDROID_NDK before starting."
    echo "They must point to your NDK directories.\n"
    exit 1
fi

#--------------------
# common defines
FF_ARCH=$1
if [ -z "$FF_ARCH" ]; then
    echo "You must specific an architecture 'arm, armv7a, x86, ...'.\n"
    exit 1
fi


FF_BUILD_ROOT=`pwd`
FF_ANDROID_PLATFORM=android-9
ANDROID_NDK=<注意修改为你的ndk目录>


FF_BUILD_NAME=
FF_SOURCE=
FF_CROSS_PREFIX=

FF_CFG_FLAGS=
FF_PLATFORM_CFG_FLAGS=

FF_EXTRA_CFLAGS=
FF_EXTRA_LDFLAGS=



#--------------------
echo ""
echo "--------------------"
echo "[*] make NDK standalone toolchain"
echo "--------------------"
./tools/do-detect-env.sh
FF_MAKE_TOOLCHAIN_FLAGS=$IJK_MAKE_TOOLCHAIN_FLAGS
FF_MAKE_FLAGS=$IJK_MAKE_FLAG
FF_GCC_VER=$IJK_GCC_VER
FF_GCC_64_VER=$IJK_GCC_64_VER


#----- armv7a begin -----
if [ "$FF_ARCH" = "armv7a" ]; then
        echo "gdebug x264-armv7a.............."
    FF_BUILD_NAME=x264-armv7a
    FF_SOURCE=$FF_BUILD_ROOT/$FF_BUILD_NAME
    
    FF_CROSS_PREFIX=arm-linux-androideabi
        FF_TOOLCHAIN_NAME=${FF_CROSS_PREFIX}-${FF_GCC_VER}

    FF_PLATFORM_CFG_FLAGS="android-armv7"

elif [ "$FF_ARCH" = "armv5" ]; then
    FF_BUILD_NAME=x264-armv5
    FF_SOURCE=$FF_BUILD_ROOT/$FF_BUILD_NAME
    
    FF_CROSS_PREFIX=arm-linux-androideabi
        FF_TOOLCHAIN_NAME=${FF_CROSS_PREFIX}-${FF_GCC_VER}

    FF_PLATFORM_CFG_FLAGS="android"

elif [ "$FF_ARCH" = "x86" ]; then
    FF_BUILD_NAME=x264-x86
    FF_SOURCE=$FF_BUILD_ROOT/$FF_BUILD_NAME
    
    FF_CROSS_PREFIX=i686-linux-android
        FF_TOOLCHAIN_NAME=x86-${FF_GCC_VER}

    FF_PLATFORM_CFG_FLAGS="android-x86"

elif [ "$FF_ARCH" = "x86_64" ]; then
    FF_ANDROID_PLATFORM=android-21

    FF_BUILD_NAME=x264-x86_64
    FF_SOURCE=$FF_BUILD_ROOT/$FF_BUILD_NAME

    FF_CROSS_PREFIX=x86_64-linux-android
    FF_TOOLCHAIN_NAME=${FF_CROSS_PREFIX}-${FF_GCC_64_VER}

    FF_PLATFORM_CFG_FLAGS="linux-x86_64"

elif [ "$FF_ARCH" = "arm64" ]; then
    FF_ANDROID_PLATFORM=android-21

    FF_BUILD_NAME=x264-arm64
    FF_SOURCE=$FF_BUILD_ROOT/$FF_BUILD_NAME

    FF_CROSS_PREFIX=aarch64-linux-android
    FF_TOOLCHAIN_NAME=${FF_CROSS_PREFIX}-${FF_GCC_64_VER}

    FF_PLATFORM_CFG_FLAGS="linux-aarch64"

else
    echo "unknown architecture $FF_ARCH";
    exit 1
fi

FF_TOOLCHAIN_PATH=$FF_BUILD_ROOT/build/$FF_BUILD_NAME/toolchain

FF_SYSROOT=$FF_TOOLCHAIN_PATH/sysroot
FF_PREFIX=$FF_BUILD_ROOT/build/$FF_BUILD_NAME/output

mkdir -p $FF_PREFIX
#mkdir -p $FF_SYSROOT

#--------------------
echo ""
echo "--------------------"
echo "[*] make NDK standalone toolchain"
echo "--------------------"
./tools/do-detect-env.sh
FF_MAKE_TOOLCHAIN_FLAGS=$IJK_MAKE_TOOLCHAIN_FLAGS
FF_MAKE_FLAGS=$IJK_MAKE_FLAG


FF_MAKE_TOOLCHAIN_FLAGS="$FF_MAKE_TOOLCHAIN_FLAGS --install-dir=$FF_TOOLCHAIN_PATH"
FF_TOOLCHAIN_TOUCH="$FF_TOOLCHAIN_PATH/touch"
if [ ! -f "$FF_TOOLCHAIN_TOUCH" ]; then
    $ANDROID_NDK/build/tools/make-standalone-toolchain.sh \
        $FF_MAKE_TOOLCHAIN_FLAGS \
        --platform=$FF_ANDROID_PLATFORM \
        --toolchain=$FF_TOOLCHAIN_NAME
    touch $FF_TOOLCHAIN_TOUCH;
fi


#--------------------
echo ""
echo "--------------------"
echo "[*] check x264 env"
echo "--------------------"
export PATH=$FF_TOOLCHAIN_PATH/bin:$PATH

export COMMON_FF_CFG_FLAGS=

FF_CFG_FLAGS="$FF_CFG_FLAGS $COMMON_FF_CFG_FLAGS"

#--------------------
# Standard options:
echo "FF_PREFIX = $FF_PREFIX"
FF_CFG_FLAGS="$FF_CFG_FLAGS --prefix=$FF_PREFIX"
FF_CFG_FLAGS="$FF_CFG_FLAGS --enable-static --disable-shared"
FF_CFG_FLAGS="$FF_CFG_FLAGS --enable-pic --enable-strip --disable-asm --disable-cli"
#FF_CFG_FLAGS="$FF_CFG_FLAGS --cross-prefix=$TOOLCHAIN/bin/arm-linux-androideabi-"
FF_CFG_FLAGS="$FF_CFG_FLAGS --cross-prefix=${FF_CROSS_PREFIX}-"
FF_CFG_FLAGS="$FF_CFG_FLAGS --host=arm-linux"
FF_CFG_FLAGS="$FF_CFG_FLAGS --sysroot=$FF_SYSROOT"

#FF_CFG_FLAGS="$FF_CFG_FLAGS --cross-prefix=${FF_CROSS_PREFIX}-"
#FF_CFG_FLAGS="$FF_CFG_FLAGS $FF_PLATFORM_CFG_FLAGS"

#--------------------
echo ""
echo "--------------------"
echo "[*] configurate x264"
echo "--------------------"
cd $FF_SOURCE && chmod +w configure
#if [ -f "./Makefile" ]; then
#    echo 'reuse configure'
#else
    echo "./configure $FF_CFG_FLAGS"
    ./configure $FF_CFG_FLAGS
#        --extra-cflags="$FF_CFLAGS $FF_EXTRA_CFLAGS" \
#        --extra-ldflags="$FF_EXTRA_LDFLAGS"
#fi

#--------------------
echo ""
echo "--------------------"
echo "[*] compile x264"
echo "--------------------"
make depend
echo "make $FF_MAKE_FLAGS"
make $FF_MAKE_FLAGS
make install

#--------------------
echo ""
echo "--------------------"
echo "[*] link x264"
echo "--------------------"

然后运行compile-x264.sh脚本，一切顺利的话可以在android/contrib/build目录下输出x264相关库，如下图:(这里只编译了armv7a类型)

enter description here

2.2 编译openssl

因为项目需要，需要支持https协议格式的视频。如果项目无需支持https协议可以略过这一步。

进入<ijkplayer主目录>/android/contrib,执行以下命令：

./compile-openssl.sh clean
./compile-openssl.sh all

ps. all 可以替换为需要的cpu类型。

如果编译过程出现invalid preprocessing directive #undefine错误，按照错误提示打开termbits.h文件，将#undefine 的这一行注释掉即可。

如果一切顺利，编译成功后在<ijkplayer主目录>/android/contrib目录下生成以下openssl文件

enter description here

2.3 编译FFmpeg

进入ijkplayer主目录，使用default脚本，首先进行软链：

cd config
rm module.sh
ln -s module-default.sh module.sh

然后修改module-default.sh脚本，左边为ijkplayer默认配置，右边为修改配置

修改配置1

修改配置2

添加以下编译选项

# Add by 21cn
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --enable-small"

# set protocols
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --disable-protocol=concat"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --disable-protocol=crypto"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --disable-protocol=data"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --disable-protocol=ffrtmpcrypt"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --disable-protocol=ffrtmphttp"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --disable-protocol=gopher"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --disable-protocol=icecast"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --disable-protocol=ijkhttphook"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --disable-protocol=ijkio"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --disable-protocol=ijklongurl"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --disable-protocol=ijkmediadatasource"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --disable-protocol=ijksegment"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --disable-protocol=ijktcphook"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --disable-protocol=md5"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --disable-protocol=mmsh"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --disable-protocol=mmst"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --disable-protocol=pipe"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --disable-protocol=prompeg"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --disable-protocol=tee"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --disable-protocol=unix"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --disable-protocol=subfile"

#set muxers
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --disable-muxers"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --enable-muxer=h264"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --enable-muxer=mp3"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --enable-muxer=mp4"

#set encoders
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --disable-encoders"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --enable-libx264"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --enable-encoder=libx264"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --enable-encoder=aac"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --enable-encoder=mp3"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --enable-encoder=mpeg4"

export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --disable-debug"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --disable-linux-perf"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --extra-cflags=-I/Users/littlebyte/develop/ijkplayer-android/android/contrib/build/x264-armv7a/output/include"
export COMMON_FF_CFG_FLAGS="$COMMON_FF_CFG_FLAGS --extra-ldflags=-L/Users/littlebyte/develop/ijkplayer-android/android/contrib/build/x264-armv7a/output/lib"
# End of add

以上添加最主要是增加了libx264编码器，并且进行了一定的精简。

最后进入 android/contrib，运行以下命令：

./compile-ffmpeg.sh clean
./compile-ffmpeg.sh armv7a

因为我只需要armv7a 的cpu类型的so库，就只编译armv7a，如果需要其他类型cpu的so库，可以armv7a修改为x86等cpu，如果需要编译全部cpu类型改为如下命令：

./compile-ffmpeg.sh all

以上命令执行完后，如果没有问题等话在android/contrib目录下生成ffmpeg 对应cpu类型的目录

enter description here

2.2 编译IjkPlayer

cd ..
./compile-ijk.sh all

执行以上命令后，在主目录的ijkplayer目录下生成最终需要的so库。

最终编译so

ijkplayer 编译备忘,支持x264和https

1. 编译前准备

2. 编译

2.1编译x264

2.1.1.进入ijkplayer主目录，新建init-android-x264.sh文件

2.1.2 在android/contrib下新建compile-x264.sh 和 tools/do-compile-x264.sh

2.2 编译openssl

2.3 编译FFmpeg

2.2 编译IjkPlayer

猜你喜欢

热点阅读