驱动 0.96'' OLED 屏

2017-05-13 本文已影响852人梁睿坤

在我经历的IoT项目中，上图中的这个屏是我最喜欢的一种了，接过显示屏的都该对它们各种复杂的接线感到崩溃吧，由其是并行式的屏幕。这个OLED冷光屏( 型号 SSD1306 )却是个例外，它有I2C和SPI两种接口这就意味着我们只要接很少的线就能将它给驱动起来。

不要因为这个屏幕只有一寸不到的面积就认为它只能显示很少的内容，它的驱动可是可以支持编写出多屏滑动界面的，这样就可以极大地扩充了显示空间。它的成本也就20来块钱左右，可以说是小型IoT设备的首选级显示模块了。

接下来，我就简单介绍一下如何在ESP8266中来使用它吧。

可支持 ESP8266和ESP32的原驱动可以到Github下载

OLED 128x64 SSD130b

安装驱动

首先要为项目安装SSD1306的驱动库，在项目目录下的命令行内运行的以下指令：

$ pio lib install 562

我是用的是PlatformIO，如果使用Arduino IDE 可以到库管理器内安装SSD1306:

线路

我的屏是I2C版本的，具体连接方法如下:

NodeMCU_I2C_OLED

固件

首先,由于这个板子有I2C和SPI两个版本，所以在实例化时有一点区别：

I2C

#include <Wire.h>  
#include "SSD1306.h"

SSD1306  display(ADDRESS, SDA, SDC);

** SPI **

SPI

#include <SPI.h>
#include "SSD1306Spi.h"

SSD1306Spi display(RES, DC, CS);

库说明:

SSD1306.h - OLED 屏幕芯片的基本驱动，用于直接在屏幕的指定点上直接绘制图案或文字
OLEDDisplayUi.h - OLED 屏的高级图型绘制库，提供图型框架、覆盖层、动画等的高级图型绘制功能，简化OLED的图形操作。

流程:

定义 display 实例 SSD1306 display(I2C_DISPLAY_ADDRESS, SDA_PIN, SCL_PIN);
定义 ui 实例 OLEDDisplayUi ui( &display );
定义 FrameCallback frame 图形绘制回调函数数组
定义各个图形框架绘制函数
定义 OverlayCallback overlays 数组
实现 Overlay 回调函数
初始化OLED (ui)
在 loop 函数中调用 ui.update() 进行屏幕刷新

#include <ESP8266WiFi.h>
#include "SSD1306.h"
#include "OLEDDisplayUi.h"
#include "Wire.h"
#include "TimeClient.h"
#include <Images.h>
#include <Fonts.h>

const int I2C_DISPLAY_ADDRESS = 0x3c;
const int SDA_PIN = D2;
const int SCL_PIN = D1;
const float UTC_OFFSET = 8;
// WIFI
const char* WIFI_SSID = "你的WIFI网络 SSID";
const char* WIFI_PWD = "WIFI网络密码";

void drawProgress(OLEDDisplay *display, int percentage, String label);
void drawDateTime(OLEDDisplay *display, OLEDDisplayUiState* state, int16_t x, int16_t y);
// void drawCurrentWeather(OLEDDisplay *display, OLEDDisplayUiState* state, int16_t x, int16_t y);
void drawHeaderOverlay(OLEDDisplay *display, OLEDDisplayUiState* state);
void drawDHT(OLEDDisplay *display, OLEDDisplayUiState* state, int16_t x, int16_t y);

SSD1306     display(I2C_DISPLAY_ADDRESS, SDA_PIN, SCL_PIN);
OLEDDisplayUi   ui( &display );
TimeClient timeClient(UTC_OFFSET);
String temp = "22";
String hum = "66";

// Add frames
// this array keeps function pointers to all frames
// frames are the single views that slide from right to left
FrameCallback frames[] = { drawDHT };
int numberOfFrames = 1;

OverlayCallback overlays[] = { drawHeaderOverlay };
int numberOfOverlays = 1;

void drawDateTime(OLEDDisplay *display, OLEDDisplayUiState* state, int16_t x, int16_t y) {
  display->setTextAlignment(TEXT_ALIGN_CENTER);
  display->setFont(ArialMT_Plain_10);

  String date = "11/3/2017"; //wunderground.getDate();

  int textWidth = display->getStringWidth(date);
  display->drawString(64 + x, 5 + y, date);
  display->setFont(ArialMT_Plain_24);

  String time = timeClient.getFormattedTime();

  textWidth = display->getStringWidth(time);
  display->drawString(64 + x, 15 + y, time);
  display->setTextAlignment(TEXT_ALIGN_LEFT);
}

void drawDHT(OLEDDisplay *display, OLEDDisplayUiState* state, int16_t x, int16_t y) {
  display->setTextAlignment(TEXT_ALIGN_CENTER);
  display->setFont(ArialMT_Plain_16);
  display->drawString(64 + x, 5 + y, "50.5");
  display->setFont(ArialMT_Plain_10);
  display->drawString(64 + x, 30 + y, "ppm");
  // display->drawString(30 + x, 15 + y, temp + "°C");
  //display->drawString(90 + x, 15 + y, hum + "%");
}

void drawProgress(OLEDDisplay *display, int percentage, String label) {
  display->clear();
  display->setTextAlignment(TEXT_ALIGN_CENTER);
  display->setFont(ArialMT_Plain_10);
  display->drawString(64, 10, label);
  display->drawProgressBar(2, 28, 124, 10, percentage);
  display->display();
}

void drawHeaderOverlay(OLEDDisplay *display, OLEDDisplayUiState* state) {
  display->setColor(WHITE);
  display->setFont(ArialMT_Plain_10);
  String time = timeClient.getFormattedTime().substring(0, 5);
  Serial.println(time);
  display->setTextAlignment(TEXT_ALIGN_LEFT);
  display->drawString(0, 54, "17:20");
  display->setTextAlignment(TEXT_ALIGN_RIGHT);
  String temp = "20°C  70%";
  display->drawString(128, 54, temp);
  display->drawHorizontalLine(0, 52, 128);
}

void updateData(OLEDDisplay *display) {
  drawProgress(display, 10, "Updating time...");
  //timeClient.updateTime();
  delay(1000);
  drawProgress(display, 30, "Updating conditions...");
  // wunderground.updateConditions(WUNDERGRROUND_API_KEY, WUNDERGRROUND_LANGUAGE, WUNDERGROUND_COUNTRY, WUNDERGROUND_CITY);
  delay(1000);
  drawProgress(display, 50, "Updating forecasts...");
  // wunderground.updateForecast(WUNDERGRROUND_API_KEY, WUNDERGRROUND_LANGUAGE, WUNDERGROUND_COUNTRY, WUNDERGROUND_CITY);
  delay(1000);
  drawProgress(display, 80, "Updating thingspeak...");
  // thingspeak.getLastChannelItem(THINGSPEAK_CHANNEL_ID, THINGSPEAK_API_READ_KEY);
  // lastUpdate = timeClient.getFormattedTime();
  // readyForWeatherUpdate = false;
  delay(1000);
  drawProgress(display, 100, "Done...");
  delay(1000);
}

void connectWiFi() {

    // initialize dispaly
    display.init();
    display.clear();
    display.display();

    display.flipScreenVertically();
    display.setFont(ArialMT_Plain_10);
    display.setTextAlignment(TEXT_ALIGN_CENTER);
    display.setContrast(255);

    WiFi.begin(WIFI_SSID, WIFI_PWD);

    int counter = 0;
    while (WiFi.status() != WL_CONNECTED) {
       delay(300);
       Serial.print(".");
       display.clear();
       display.drawXbm(34, 2, WiFi_Logo_width, WiFi_Logo_height, WiFi_Logo_bits);
       display.drawString(64, WiFi_Logo_height+5, "Connecting to WiFi");
       display.drawXbm(46, WiFi_Logo_height+20, 8, 8, counter % 3 == 0 ? activeSymbol : inactiveSymbol);
       display.drawXbm(60, WiFi_Logo_height+20, 8, 8, counter % 3 == 1 ? activeSymbol : inactiveSymbol);
       display.drawXbm(74, WiFi_Logo_height+20, 8, 8, counter % 3 == 2 ? activeSymbol : inactiveSymbol);
       display.display();
       counter++;

    }
}

void setup() {
  Serial.begin(115200);
  Serial.println();
  Serial.println();

  connectWiFi();

  ui.setTargetFPS(60);

    // Customize the active and inactive symbol
  //ui.setActiveSymbol(activeSymbol);
  //ui.setInactiveSymbol(inactiveSymbol);

  // You can change this to
  // TOP, LEFT, BOTTOM, RIGHT
  //ui.setIndicatorPosition(BOTTOM);

  // Defines where the first frame is located in the bar.
  //ui.setIndicatorDirection(LEFT_RIGHT);
  ui.disableAllIndicators();
  // You can change the transition that is used
  // SLIDE_LEFT, SLIDE_RIGHT, SLIDE_UP, SLIDE_DOWN
  //ui.setFrameAnimation(SLIDE_LEFT);

  // Add frames
  ui.setFrames(frames, numberOfFrames);

  // Add overlays
  ui.setOverlays(overlays, numberOfOverlays);
  ui.disableAutoTransition();
  // Initialising the UI will init the display too.
  ui.init();

  display.flipScreenVertically();

}

void loop() {
  int remainingTimeBudget = ui.update();

  if (remainingTimeBudget > 0) {
    // You can do some work here
    // Don't do stuff if you are below your
    // time budget.
    delay(remainingTimeBudget);
  }
}

参考阅读

esp8266-oled-ssd1306驱动

驱动 0.96'' OLED 屏

安装驱动

线路

固件

参考阅读

猜你喜欢

热点阅读