2020-06-01
2020-06-01 本文已影响0人
大唐百夫长
1、自建yum仓库，分别为网络源和本地源
1.1 创建本地源
# 把原有的yum源配置文件移动到备份文件夹
[root@centos7 cd]# cd /etc/yum.repos.d/
[root@centos7 yum.repos.d]# ls
CentOS-Base.repo CentOS-fasttrack.repo CentOS-Vault.repo
CentOS-CR.repo CentOS-Media.repo CentOS-x86_64-kernel.repo
CentOS-Debuginfo.repo CentOS-Sources.repo
[root@centos7 yum.repos.d]# mkdir backup
[root@centos7 yum.repos.d]# mv CentOS-* backup
# 挂载光盘到/misc/cd目录下，也可以是其他目录
[root@centos7 yum.repos.d]# cd /misc/cd
[root@centos7 cd]# ls
CentOS_BuildTag GPL LiveOS RPM-GPG-KEY-CentOS-7
EFI images Packages RPM-GPG-KEY-CentOS-Testing-7
EULA isolinux repodata TRANS.TBL
# 创建指向本地yum源的配置文件，必须是.repo结尾
[root@centos7 yum.repos.d]# cat base.repo
[base] # 为yum源起一个名字，也可以是其他名字，但是参考原有的配置文件还是叫base
name=local_iso # yum源的描述信息，也可以不写
baseurl=file:///misc/cd # yum源的路径，指向光盘中repodata目录所在的路径
gpgcheck=0 # 是否开启校验，0是不校验，默认为1
# 清除原有yum源缓存，这一步必须做，否则会出错
[root@centos7 ~]# yum clean all
Loaded plugins: fastestmirror, langpacks
Cleaning repos: base
Cleaning up list of fastest mirrors
Other repos take up 38 M of disk space (use --verbose for details)
# 生成现有yum源的元数据缓存，可以不执行，如果不执行，在安装数据包时，会自动下载缓存
[root@centos7 ~]# yum makecache
Loaded plugins: fastestmirror, langpacks
Determining fastest mirrors
base | 4.0 kB 00:00:00
(1/4): base/group_gz | 242 kB 00:00:00
(2/4): base/primary_db | 4.7 MB 00:00:00
(3/4): base/other_db | 2.8 MB 00:00:00
(4/4): base/filelists_db | 6.3 MB 00:00:00
Metadata Cache Created
# 列出yum源
[root@centos7 ~]# yum repolist
Loaded plugins: fastestmirror, langpacks
Loading mirror speeds from cached hostfile
repo id repo name status
base local_iso 6,713
repolist: 6,713
1.2 创建网络源
# 先查看httpd包是否安装，如果没有安装通过yum安装，http服务器地址192.168.227.128
[root@centos7 ~]# rpm -q httpd
httpd-2.4.6-90.el7.centos.x86_64
# 启动httpd服务
[root@centos7 ~]# systemctl start httpd
[root@centos7 ~]# systemctl status httpd
● httpd.service - The Apache HTTP Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; disabled; vendor preset: disabled)
Active: active (running) since Sat 2020-05-30 23:12:58 CST; 110ms ago
Docs: man:httpd(8)
man:apachectl(8)
# 模仿aliyun的yum源路径，在httpd主目录下创建子目录
[root@centos7 ~]# mkdir -p /var/www/html/centos/{6,7}/os/x86_64
[root@centos7 ~]# tree /var/www/html/centos
/var/www/html/centos
├── 6
│ └── os
│ └── x86_64
└── 7
└── os
└── x86_64
# 分别挂载CentOS6和CentOS7的光盘到相应文件夹
[root@centos7 ~]# mount /dev/sr0 /var/www/html/centos/6/os/x86_64/
mount: /dev/sr0 is write-protected, mounting read-only
[root@centos7 ~]# mount /dev/sr1 /var/www/html/centos/7/os/x86_64/
mount: /dev/sr1 is write-protected, mounting read-only
# CentOS6上修改客户端的配置文件
[root@CentOS6 yum.repos.d]#cat base.repo
[base]
name=http_yum
baseurl=http://192.168.227.128/centos/$releasever/os/$basearch/
gpgcheck=0
[root@CentOS6 yum.repos.d]#yum clean all
Loaded plugins: fastestmirror, refresh-packagekit, security
Cleaning repos: base
Cleaning up Everything
Cleaning up list of fastest mirrors
[root@CentOS6 yum.repos.d]#yum makecache
Loaded plugins: fastestmirror, refresh-packagekit, security
Determining fastest mirrors
base | 4.0 kB 00:00
base/group_gz | 242 kB 00:00
base/filelists_db | 6.3 MB 00:00
base/primary_db | 4.7 MB 00:00
base/other_db | 2.8 MB 00:00
Metadata Cache Created
[root@CentOS6 yum.repos.d]#yum repolist
Loaded plugins: fastestmirror, refresh-packagekit, security
Loading mirror speeds from cached hostfile
repo id repo name status
base http_yum 6713
repolist: 6713
# 在CentOS7上修改客户端配置文件
[root@centos7 yum.repos.d]#cat base.repo
[base]
name=http_yum
baseurl=http://192.168.227.128/centos/$releasever/os/$basearch/
gpgcheck=0
[root@centos7 yum.repos.d]#yum clean all
Loaded plugins: fastestmirror, langpacks
Repodata is over 2 weeks old. Install yum-cron? Or run: yum makecache fast
Cleaning repos: base
Cleaning up list of fastest mirrors
Other repos take up 56 M of disk space (use --verbose for details)
[root@centos7 yum.repos.d]#yum makecache
Loaded plugins: fastestmirror, langpacks
Determining fastest mirrors
base | 3.6 kB 00:00:00
(1/4): base/7/x86_64/group_gz | 165 kB 00:00:00
(2/4): base/7/x86_64/filelists_db | 3.3 MB 00:00:00
(3/4): base/7/x86_64/primary_db | 3.2 MB 00:00:00
(4/4): base/7/x86_64/other_db | 1.3 MB 00:00:00
Metadata Cache Created
[root@centos7 yum.repos.d]#yum repolist
Loaded plugins: fastestmirror, langpacks
Loading mirror speeds from cached hostfile
repo id repo name status
base/7/x86_64 http_yum 4,067
repolist: 4,067
2、编译安装http2.4，实现可以正常访问，并将编译步骤和结果提交。
# 解压httpd软件包
[root@centos7 data]# tar xf httpd-2.4.39.tar.bz2
# 进入到目录中，可以先看一下INSTALL和README文件，里面写了安装方法
[root@centos7 data]# cd httpd-2.4.39/# 在安装之前，先把需要的软件包装上，如果没有提前装，在执行configure时会提示，也可以根据提示安装；也可以直接安装“Development Tools”开发包组
[root@centos7 httpd-2.4.39]#yum install gcc apr-devel apr-util-devel pcre-devel openssl-devel -y
# 执行configure开启特性和检测安装环境，可以使用./configure --help来查看选项，这里只指定了安装目录为/app/httpd2.4.39，开启了ssl加密功能，在执行完毕之后可以使用echo $?查看执行结果
[root@centos7 httpd-2.4.39]# ./configure --prefix=/app/httpd2.4.39 --enable-ssl
# 执行make命令编译，可以跟-j选项指定编译的核心个数，个数越多编译越快，我只有单核的处理器，就不指定了，过程可能会比较长，执行完毕之后使用echo $?查看结果
[root@centos7 httpd-2.4.39]# make
# 执行make install安装
[root@centos7 httpd-2.4.39]# make install
# 修改环境变量，我这里是临时修改，要永久修改可以写到配置文件中
[root@centos7 bin]# PATH="/app/httpd2.4.39/bin:$PATH"
[root@centos7 bin]# which apachectl /app/httpd2.4.39/bin/apachectl
# 启动服务，启动时可能会报域名错误，找到配置文件中ServerName一行，去掉前面的#即可
[root@centos7 bin]# apachectl start
# 访问测试，通过CentOS6客户端访问成功
[root@CentOS6 ~]#curl 192.168.227.128
<html><body><h1>It works!</h1></body></html>
3、创建一个2G的文件系统，块大小为2048byte，预留1%可用空间,文件系统 ext4，卷标为TEST，要求此分区开机后自动挂载至/test目录，且默认有acl挂载选项
# 先通过fdisk分出来一个2G的分区/dev/sda8
[root@centos7 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 200G 0 disk
├─sda1 8:1 0 1G 0 part /boot
├─sda2 8:2 0 100G 0 part /
├─sda3 8:3 0 50G 0 part /data
├─sda4 8:4 0 1K 0 part
├─sda5 8:5 0 2G 0 part [SWAP]
├─sda6 8:6 0 10G 0 part
├─sda7 8:7 0 10G 0 part
│ └─testvg-testlv 253:0 0 4G 0 lvm
└─sda8 8:8 0 2G 0 part
sdb 8:16 0 20G 0 disk
└─sdb1 8:17 0 10G 0 part
sr0 11:0 1 3.7G 0 rom
sr1 11:1 1 4.4G 0 rom
# 创建文件系统
[root@centos7 ~]# mkfs.ext4 -b 2048 -L 'TEST' -m 1 /dev/sda8
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=TEST
OS type: Linux
Block size=2048 (log=1)
Fragment size=2048 (log=1)
Stride=0 blocks, Stripe width=0 blocks
131072 inodes, 1048576 blocks
10485 blocks (1.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=269484032
64 block groups
16384 blocks per group, 16384 fragments per group
2048 inodes per group
Superblock backups stored on blocks:
16384, 49152, 81920, 114688, 147456, 409600, 442368, 802816
Allocating group tables: done
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
# 把挂载信息写入/etc/fstab文件中，实现开机自动挂载，在CentOS7上默认就支持acl权限，所以权限写defaults即可，这里的/dev/sda8也可以写成UUID，UUID可以通过blkid命令查
[root@centos7 ~]# cat /etc/fstab
#
# /etc/fstab
# Created by anaconda on Thu Apr 16 12:30:24 2020
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
UUID=6d9afe5c-50af-4d28-9855-2292ba1ef3c0 / xfs defaults 0 0
UUID=7a87851a-947b-41a6-96e0-a0f6a1a20069 /boot xfs defaults 0 0
UUID=87c89478-a67c-4f92-9d99-3924cce70351 /data xfs defaults 0 0
UUID=131563e5-7253-495b-bb20-c7873c76cdb9 swap swap defaults 0 0
/dev/sda8 /test ext4 defaults 0 0
# 在CentOS6上默认挂载权限不包括acl，需要指定acl权限挂载
[root@CentOS6 ~]#cat /etc/fstab
#
# /etc/fstab
# Created by anaconda on Sun Dec 11 11:13:37 2016
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
UUID=2bb39d88-9d3d-4675-b842-213ad94b1f30 / ext4 defaults 1 1
UUID=347e9532-1408-47a0-bb6a-b4d2bf886e31 /boot ext4 defaults 1 2
/dev/sdb3 /test ext4 acl 1 2
UUID=31bf342f-8f6e-4e13-959c-4ee6e4bd1110 swap swap defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
4、创建一个至少有两个PV组成的大小为20G的名为testvg的VG;要求PE大小 为16MB, 而后在卷组中创建大小为5G的逻辑卷testlv;挂载至/users目录；
# 先划分出来/dev/sda7和/dev/sdb1两个分区，大小都为10G
[root@centos7 ~]# lsblk /dev/sda7
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda7 8:7 0 10G 0 part
[root@centos7 ~]# lsblk /dev/sdb1
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sdb1 8:17 0 10G 0 part
# 创建pv
[root@centos7 ~]# pvcreate /dev/sda7 /dev/sdb1
Physical volume "/dev/sda7" successfully created.
Physical volume "/dev/sdb1" successfully created.
[root@centos7 ~]# pvs
PV VG Fmt Attr PSize PFree
/dev/sda7 lvm2 --- 10.00g 10.00g
/dev/sdb1 lvm2 --- 10.00g 10.00g
# 创建testvg，指定PE为16M
[root@centos7 ~]# vgcreate -s 16M testvg /dev/sda7 /dev/sdb1
Volume group "testvg" successfully created
[root@centos7 ~]# vgs
VG #PV #LV #SN Attr VSize VFree
testvg 2 0 0 wz--n- <19.97g <19.97g
# 创建testlv，大小为5G
[root@centos7 ~]# lvcreate -n testlv -L 5G testvg
Logical volume "testlv" created.
[root@centos7 ~]# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
testlv testvg -wi-a----- 5.00g
# 创建文件系统
[root@centos7 ~]# mkfs.ext4 /dev/testvg/testlv
[root@centos7 ~]# blkid /dev/testvg/testlv
/dev/testvg/testlv: UUID="847705c0-a8b1-432b-a89e-2d8feec446cd" TYPE="ext4"
# 挂载至/user目录
[root@centos7 ~]# mkdir /users
[root@centos7 ~]# mount /dev/testvg/testlv /users
[root@centos7 ~]# df /users
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/testvg-testlv 4.8G 20M 4.6G 1% /users
