极验滑块验证码破解最新版（97%左右通过率）
2019-06-14 本文已影响60人
等_7a20
一、简述：
最近无聊想搞一下极验的滑块验证码破解这块，发现破解js代码耗时又耗力出现版本更新可能以前的所有努力都要推翻重做，不够通用性，最后还是选用selenium + PIL 来实现滑块验证码的破解。
期间也翻阅过很多文章,大多都已经失效，并且缺口位置查找和模拟滑动轨迹成功率很低，很难应用到实际开发项目中，本次是针对最新版本的极验滑块验证码进行破解。
二、项目环境
大致需要用到以下模块各位看观请提前准备好:
python3.6、selenium、numpy、PIL、chromedriver
三、分析步骤以及代码编写
-
首先分析目标网站（本次主要以geetest官网滑块demo为参考）
1.png
网站大致长这个样子，首先f12打开 开发者工具选择Elements查看节点，发现最新版本的滑块图片是使用画布来进行呈现的，期间查阅大量文档，使用如下代码获得画布中的图片数据，获取到的图片是base64进行编码的
document.getElementsByClassName("geetest_canvas_bg geetest_absolute")[0].toDataURL("image/png")
2.png
2.通过分析发现这两个画布放的是所需要的背景图和缺口图（其实一眼就看出来的）
3.png
- 接下来就是代码的编写了
3.1 首先是获得背景图和缺口图的数据
def get_images(self):
"""
获取验证码图片
:return: 图片的location信息
"""
time.sleep(1)
self.browser.web_driver_wait_ruishu(10, "class", 'geetest_canvas_slice')
fullgb = self.browser.execute_js('document.getElementsByClassName("geetest_canvas_bg geetest_'
'absolute")[0].toDataURL("image/png")')["value"]
bg = self.browser.execute_js('document.getElementsByClassName("geetest_canvas_fullbg geetest_fade'
' geetest_absolute")[0].toDataURL("image/png")')["value"]
return bg, fullgb
3.2 对数据进行解码操作并保存图片
def get_decode_image(self, filename, location_list):
"""
解码base64数据
"""
_, img = location_list.split(",")
img = base64.decodebytes(img.encode())
new_im: image.Image = image.open(BytesIO(img))
return new_im
3.3 接下来就是计算缺口位置了(这里使用的PIL中计算两张图片的差值获得缺口位置)
def compute_gap(self, img1, img2):
"""计算缺口偏移 这种方式成功率很高"""
# 将图片修改为RGB模式
img1 = img1.convert("RGB")
img2 = img2.convert("RGB")
# 计算差值
diff = ImageChops.difference(img1, img2)
# 灰度图
diff = diff.convert("L")
# 二值化
diff = diff.point(self.table, '1')
left = 43
# 这里做了优化为减少误差 纵坐标的像素点大于5时才认为是找到
# 防止缺口有凸起时有误差
for w in range(left, diff.size[0]):
lis = []
for h in range(diff.size[1]):
if diff.load()[w, h] == 1:
lis.append(w)
if len(lis) > 5:
return w
3.4 当滑块的缺口位置找到以后就需要生成滑动轨迹(其中加20是保证在滑动时先超过缺口位置然后在慢慢还原到正确位置)
def ease_out_quart(self, x):
return 1 - pow(1 - x, 4)
def get_tracks_2(self, distance, seconds, ease_func):
"""
根据轨迹离散分布生成的数学 生成 # 参考文档 https://www.jianshu.com/p/3f968958af5a
成功率很高 90% 往上
:param distance: 缺口位置
:param seconds: 时间
:param ease_func: 生成函数
:return: 轨迹数组
"""
distance += 20
tracks = [0]
offsets = [0]
for t in np.arange(0.0, seconds, 0.1):
ease = ease_func
offset = round(ease(t / seconds) * distance)
tracks.append(offset - offsets[-1])
offsets.append(offset)
tracks.extend([-3, -2, -3, -2, -2, -2, -2, -1, -0, -1, -1, -1])
return tracks
3.5 最后也就是滑动滑块到缺口位置
def move_to_gap(self, track):
"""移动滑块到缺口处"""
slider = self.wait.until(EC.presence_of_element_located((By.CLASS_NAME, 'geetest_slider_button')))
ActionChains(self.browser).click_and_hold(slider).perform()
while track:
x = track.pop(0)
ActionChains(self.browser).move_by_offset(xoffset=x, yoffset=0).perform()
time.sleep(0.02)
ActionChains(self.browser).release().perform()
贴出完整代码(注意selenium有些方法会被极验检测到所以使用js命令直接运行的方式来达到效果)
crack.py
# -*-coding:utf-8 -*-
import base64
import time
import functools
import numpy as np
from tools.selenium_spider import SeleniumSpider
from selenium.webdriver import ActionChains
from selenium.webdriver.support import expected_conditions as EC
from selenium.webdriver.support.ui import WebDriverWait
from selenium.webdriver.common.by import By
import PIL.Image as image
from PIL import ImageChops, PngImagePlugin
from io import BytesIO
class Crack(object):
"""
解决三代极验滑块验证码
"""
def __init__(self):
self.url = 'https://www.geetest.com'
self.browser = SeleniumSpider(path="/personalwork/personal_tools_project/adbtools/chromedriver", max_window=True)
self.wait = WebDriverWait(self.browser, 100)
self.BORDER = 8
self.table = []
for i in range(256):
if i < 50:
self.table.append(0)
else:
self.table.append(1)
def open(self):
"""
打开浏览器,并输入查询内容
"""
self.browser.get(self.url)
self.browser.get(self.url + "/Sensebot/")
self.browser.web_driver_wait_ruishu(10, "class", 'experience--area')
time.sleep(1)
self.browser.execute_js('document.getElementsByClassName("experience--area")[0].getElementsByTagName("div")'
'[2].getElementsByTagName("ul")[0].getElementsByTagName("li")[1].click()')
time.sleep(1)
self.browser.web_driver_wait_ruishu(10, "class", 'geetest_radar_tip')
self.browser.execute_js('document.getElementsByClassName("geetest_radar_tip")[0].click()')
def check_status(self):
"""
检测是否需要滑块验证码
:return:
"""
self.browser.web_driver_wait_ruishu(10, "class", 'geetest_success_radar_tip_content')
try:
time.sleep(0.5)
message = self.browser.find_element_by_class_name("geetest_success_radar_tip_content").text
if message == "验证成功":
return False
else:
return True
except Exception as e:
return True
def get_images(self):
"""
获取验证码图片
:return: 图片的location信息
"""
time.sleep(1)
self.browser.web_driver_wait_ruishu(10, "class", 'geetest_canvas_slice')
fullgb = self.browser.execute_js('document.getElementsByClassName("geetest_canvas_bg geetest_'
'absolute")[0].toDataURL("image/png")')["value"]
bg = self.browser.execute_js('document.getElementsByClassName("geetest_canvas_fullbg geetest_fade'
' geetest_absolute")[0].toDataURL("image/png")')["value"]
return bg, fullgb
def get_decode_image(self, filename, location_list):
"""
解码base64数据
"""
_, img = location_list.split(",")
img = base64.decodebytes(img.encode())
new_im: PngImagePlugin.PngImageFile = image.open(BytesIO(img))
# new_im.convert("RGB")
# new_im.save(filename)
return new_im
def compute_gap(self, img1, img2):
"""计算缺口偏移 这种方式成功率很高"""
# 将图片修改为RGB模式
img1 = img1.convert("RGB")
img2 = img2.convert("RGB")
# 计算差值
diff = ImageChops.difference(img1, img2)
# 灰度图
diff = diff.convert("L")
# 二值化
diff = diff.point(self.table, '1')
left = 43
for w in range(left, diff.size[0]):
lis = []
for h in range(diff.size[1]):
if diff.load()[w, h] == 1:
lis.append(w)
if len(lis) > 5:
return w
def ease_out_quad(self, x):
return 1 - (1 - x) * (1 - x)
def ease_out_quart(self, x):
return 1 - pow(1 - x, 4)
def ease_out_expo(self, x):
if x == 1:
return 1
else:
return 1 - pow(2, -10 * x)
def get_tracks_2(self, distance, seconds, ease_func):
"""
根据轨迹离散分布生成的数学 生成 # 参考文档 https://www.jianshu.com/p/3f968958af5a
成功率很高 90% 往上
:param distance: 缺口位置
:param seconds: 时间
:param ease_func: 生成函数
:return: 轨迹数组
"""
distance += 20
tracks = [0]
offsets = [0]
for t in np.arange(0.0, seconds, 0.1):
ease = ease_func
offset = round(ease(t / seconds) * distance)
tracks.append(offset - offsets[-1])
offsets.append(offset)
tracks.extend([-3, -2, -3, -2, -2, -2, -2, -1, -0, -1, -1, -1])
return tracks
def get_track(self, distance):
"""
根据物理学生成方式 极验不能用 成功率基本为0
:param distance: 偏移量
:return: 移动轨迹
"""
distance += 20
# 移动轨迹
track = []
# 当前位移
current = 0
# 减速阈值
mid = distance * 3 / 5
# 计算间隔
t = 0.5
# 初速度
v = 0
while current < distance:
if current < mid:
# 加速度为正2
a = 2
else:
# 加速度为负3
a = -3
# 初速度v0
v0 = v
# 当前速度v = v0 + at
v = v0 + a * t
# 移动距离x = v0t + 1/2 * a * t^2
move = v0 * t + 0.5 * a * (t ** 2)
# 当前位移
current += move
# 加入轨迹
track.append(round(move))
track.extend([-3, -3, -2, -2, -2, -2, -2, -1, -1, -1, -1])
return track
def move_to_gap(self, track):
"""移动滑块到缺口处"""
slider = self.wait.until(EC.presence_of_element_located((By.CLASS_NAME, 'geetest_slider_button')))
ActionChains(self.browser).click_and_hold(slider).perform()
while track:
x = track.pop(0)
ActionChains(self.browser).move_by_offset(xoffset=x, yoffset=0).perform()
time.sleep(0.02)
ActionChains(self.browser).release().perform()
def crack(self, n):
# 打开浏览器
self.open()
if self.check_status():
# 保存的图片名字
bg_filename = 'bg.png'
fullbg_filename = 'fullbg.png'
# 获取图片
bg_location_base64, fullbg_location_64 = self.get_images()
# 根据位置对图片进行合并还原
bg_img = self.get_decode_image(bg_filename, bg_location_base64)
fullbg_img = self.get_decode_image(fullbg_filename, fullbg_location_64)
# 获取缺口位置
gap = self.compute_gap(fullbg_img, bg_img)
print('缺口位置', gap)
track = self.get_tracks_2(gap - self.BORDER, 1, self.ease_out_quart)
print("滑动轨迹", track)
print("滑动距离", functools.reduce(lambda x, y: x+y, track))
self.move_to_gap(track)
time.sleep(1)
if not self.check_status():
print('验证成功')
return True
else:
print('验证失败')
# 保存图片方便调试
bg_img.save(f"bg_img{n}.png")
fullbg_img.save(f"fullbg{n}.png")
return False
else:
print("验证成功")
return True
if __name__ == '__main__':
print('开始验证')
crack = Crack()
# crack.crack(0)
count = 0
for i in range(200):
if crack.crack(i):
count += 1
print(f"成功率：{count / 200 * 100}%")
selenium_spider.py
#!/usr/local/bin/python
# coding:utf-8
"""
@author: Liubing
@software: PyCharm
@file: selenium_spider.py
@time: 2019-03-11 13:46
@describe: 基于selenium版本进一步封装 只针对于谷歌浏览器 其他浏览器需要自己封装
"""
import json
import time as time_
from lxml import etree
from selenium.webdriver.support.wait import WebDriverWait
from selenium.webdriver.support import expected_conditions as EC
from selenium.webdriver.chrome.webdriver import WebDriver
from selenium.webdriver.chrome.options import Options
class SeleniumSpider(WebDriver):
"""基于selenium进一步封装"""
def __init__(self, path, params=None, max_window=False, *args, **kwargs):
"""
初始化
:param path: str selenium驱动路径
:param params: list driver 附加参数
:param args: tuple
:param kwargs:
"""
self.__path = path
self.__params = params
# 初始化
self.__options = Options()
self.__options.add_argument('--dns-prefetch-disable')
self.__options.add_argument('--disable-gpu') # 谷歌文档提到需要加上这个属性来规避bug
self.__options.add_argument('disable-infobars') # 隐藏"Chrome正在受到自动软件的控制"
# self.__options.add_argument('--headless')
self.is_maximize_window = max_window # 是否开启全屏模式
# 过检测 具体参考文档: https://juejin.im/post/5c62b6d5f265da2dab17ae3c
self.__options.add_experimental_option('excludeSwitches', ['enable-automation'])
if params:
for i in params:
self.__options.add_argument(i)
super(SeleniumSpider, self).__init__(executable_path=self.__path, options=self.__options, *args, **kwargs)
# 过检测准备工作
self.execute_chrome_protocol_js(
protocol="Page.addScriptToEvaluateOnNewDocument",
params={"source": """
Object.defineProperty(navigator, 'webdriver', {
get: () => false,
});"""})
if self.is_maximize_window:
self.maximize_window()
# 规则部分
self.ID = "id"
self.XPATH = "xpath"
self.LINK_TEXT = "link text"
self.PARTIAL_LINK_TEXT = "partial link text"
self.NAME = "name"
self.TAG_NAME = "tag name"
self.CLASS_NAME = "class name"
self.CSS_SELECTOR = "css selector"
def cookies_dict_to_selenium_cookies(self, cookies: dict, domain):
"""
requests cookies 转换到 selenium cookies
:param cookies: requests cookies
:return: selenium 支持的cookies
"""
temp_cookies = []
for key, value in cookies.items():
# requests 有bug 域区分的不是很清楚 手动区分 只限全国电信接口能用
temp_cookies.append({"name": key, "value": value, "domain": domain})
return temp_cookies
def get(self, url: str, cookies=None, domain=None):
"""
请求数据
:param url: 待请求的url
:param cookies: 添加cookies cookies 格式 [{"name": key, "value": value, "domain": domain},...]
:param domain: cookie作用域
:return:
"""
super().get(url)
if cookies:
# 执行
if type(cookies) == list:
for cookie in cookies:
if "name" in cookie.keys() and "value" in cookie.keys() and "domain" in cookie.keys():
self.add_cookie(cookie)
else:
raise TypeError('cookies错误请传入正确格式[{"name": key, "value": value, "domain": domain},...'
'] 或者{key: vale,...}')
elif type(cookies) == dict:
if domain:
for i in self.cookies_dict_to_selenium_cookies(cookies, domain):
self.add_cookie(i)
else:
raise ValueError("{key:vale}格式必须传入doamin参数")
# 刷新页面
self.refresh()
def web_driver_wait(self, time: int, rule: str, num: str):
"""
页面等待 瑞数产品弃用这种方法 不然会400错误
:param time: 等待时间
:param rule: 规则 [id, xpath, link text, partial link text, name, tag name, class name, css selector]
:param num: 根据元素id
:return:
"""
WebDriverWait(self, time, 0.5).until(
EC.presence_of_element_located((rule, num)))
def web_driver_wait_ruishu(self, time: int, rule: str, num: str):
"""
笨方法 遍历页面匹配
:param time: 等待时间
:param rule: 规则 [id, class]
:param num: 根据元素id
:return:
"""
while time:
response = self.execute_js("document.documentElement.outerHTML")
try:
html = etree.HTML(text=response["value"])
inp = html.xpath("//*[contains(@%s, '%s')]" % (rule, num))
if inp:
break
except Exception as e:
continue
time_.sleep(1)
time -= 1
if not time:
raise Exception("未找到 %s" % num)
def execute_chrome_protocol_js(self, protocol, params: dict):
"""
Chrome DevTools 协议操作 具体协议请参考 https://chromedevtools.github.io/devtools-protocol/
:param protocol: str 协议名称
:param params: dict 参数
:return:
"""
resource = "/session/%s/chromium/send_command_and_get_result" % self.session_id
command_executor = self.command_executor
url = command_executor._url + resource
body = json.dumps({'cmd': protocol, 'params': params})
response = command_executor._request('POST', url, body)
if response['status']:
return response
return response["value"]
def execute_js(self, js):
"""
执行js 过瑞数检测
:param js: str 待执行的js
:return: {"type": "xxx", value: "xxx"}
"""
resource = "/session/%s/chromium/send_command_and_get_result" % self.session_id
command_executor = self.command_executor
url = command_executor._url + resource
body = json.dumps({'cmd': "Runtime.evaluate", 'params': {"expression": js}})
response = command_executor._request('POST', url, body)
if response['status']:
return response
return response["value"]["result"]
最后以极验官网demo为例进行了200次的测试，准确率高达了99%。
4.jpg
