python入门简单的 c/s远程操作

实现目标：

通过控制端，可以实现N台主机执行同一操作。

具体代码如下：

1、控制端代码

[root@361way tmp]# vim client.py
#!/usr/bin/env python
import socket,os,sys
ost=sys.argv[1]
▽ort=4567
for host in os.popen('cat ip.list').readlines():
print host
s=socket.socket(socket.AF_INET,socket.SOCK_STREAM)
s.connect((host,port))
while 1:
data=sys.argv[2]
if not data:
break
s.sendall(data)
data=s.recv(1024)
if not data:
break
print data
s.close()

2、被控制端代码

[root@localhost tmp]# vim server.py
#!/usr/bin/env python
import socket,os
host=''
port=4567
s=socket.socket(socket.AF_INET,socket.SOCK_STREAM)
s.setsockopt(socket.SOL_SOCKET,socket.SO_REUSEADDR,1)
s.bind((host,port))
s.listen(1)
print "Server is running on port %d; press ctrl-c to terminate." % port
while 1:
clientsock,clientaddr=s.accept()
print "connect from %s" % str(clientaddr)
clientfile=clientsock.makefile('rw',0)
data=clientsock.recv(1024)
command=os.popen(data).read()
clientfile.write("%s" % command)
clientfile.close()
clientsock.close()

3、操作方法

ip.list里写server端的IP地址，每行一个，如：

1.1.1.1
2.2.2.2

使用方法，将server.py部署于目标主机上，执行server.py；客户端执行python client.py ip.list "command
"即可。示例如下：

[root@361way tmp]# python client.py ip.list ifconfig
192.168.0.106
eth0 Link encap:Ethernet HWaddr 52:54:00:D8:F3:E7
inet addr:192.168.0.106 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::5054:ff:fed8:f3e7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:627 errors:0 dropped:0 overruns:0 frame:0
TX packets:262 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:71041 (69.3 Kb) TX bytes:55281 (53.9 Kb)
192.168.0.110
eth0 Link encap:Ethernet HWaddr 52:54:00:D7:F8:E7
inet addr:192.168.0.110 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::5054:ff:fed7:f8e7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:770 errors:0 dropped:0 overruns:0 frame:0
TX packets:438 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:87223 (85.1 KiB) TX bytes:69993 (68.3 KiB)

代码已放到github上。