直播

服务器搭建VPN

2018-08-20  本文已影响402人  gb_QA_log

管理和使用

开机自启动：

sudo systemctl enable pptpd ipsec xl2tpd
sudo systemctl restart pptpd ipsec xl2tpd

管理员请注意：根据需要的协议添加不同类型的账户，不必重启

sudo vim /etc/ppp/chap-secrets
# "你的VPN用户名1"  l2tpd  "你的VPN密码1"  *
# "你的VPN用户名2"  pptpd  "你的VPN密码2"  *

用户使用：

L2TP/IPSec PSK
Server IP: ***.**.**.**
IPsec PSK: ***^*&^$%&^$
Username: ***
Password: ***

PPTP
Server IP: ***.**.**.**
Username: ***
Password: ***

IPSec

参考

install

wget https://git.io/vpnsetup -O vpnsetup.sh
vim vpnsetup.sh 
# 注释掉[ 
# sudo apt-get -yq update || exiterr "'apt-get update' failed."  
# 该行
# 修改8.8.8.8为202.38.64.56
# ]
sudo sh vpnsetup.sh

附录vpnsetup.sh:

#!/bin/sh
#
# Script for automatic setup of an IPsec VPN server on Ubuntu LTS and Debian.
# Works on any dedicated server or virtual private server (VPS) except OpenVZ.
#
# DO NOT RUN THIS SCRIPT ON YOUR PC OR MAC!
#
# The latest version of this script is available at:
# https://github.com/hwdsl2/setup-ipsec-vpn
#
# Copyright (C) 2014-2018 Lin Song <linsongui@gmail.com>
# Based on the work of Thomas Sarlandie (Copyright 2012)
#
# This work is licensed under the Creative Commons Attribution-ShareAlike 3.0
# Unported License: http://creativecommons.org/licenses/by-sa/3.0/
#
# Attribution required: please include my name in any derivative and let me
# know how you have improved it!

# =====================================================

# Define your own values for these variables
# - IPsec pre-shared key, VPN username and password
# - All values MUST be placed inside 'single quotes'
# - DO NOT use these special characters within values: \ " '

YOUR_IPSEC_PSK=''
YOUR_USERNAME=''
YOUR_PASSWORD=''

# Important notes:   https://git.io/vpnnotes
# Setup VPN clients: https://git.io/vpnclients

# =====================================================

export PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
SYS_DT="$(date +%F-%T)"

exiterr()  { echo "Error: $1" >&2; exit 1; }
exiterr2() { exiterr "'apt-get install' failed."; }
conf_bk() { /bin/cp -f "$1" "$1.old-$SYS_DT" 2>/dev/null; }
bigecho() { echo; echo "## $1"; echo; }

check_ip() {
  IP_REGEX='^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$'
  printf '%s' "$1" | tr -d '\n' | grep -Eq "$IP_REGEX"
}

vpnsetup() {

os_type="$(lsb_release -si 2>/dev/null)"
if [ -z "$os_type" ]; then
  [ -f /etc/os-release  ] && os_type="$(. /etc/os-release  && echo "$ID")"
  [ -f /etc/lsb-release ] && os_type="$(. /etc/lsb-release && echo "$DISTRIB_ID")"
fi
if ! printf '%s' "$os_type" | head -n 1 | grep -qiF -e ubuntu -e debian -e raspbian; then
  exiterr "This script only supports Ubuntu and Debian."
fi

if [ "$(sed 's/\..*//' /etc/debian_version)" = "7" ]; then
  exiterr "Debian 7 is not supported."
fi

if [ -f /proc/user_beancounters ]; then
  exiterr "OpenVZ VPS is not supported. Try OpenVPN: github.com/Nyr/openvpn-install"
fi

if [ "$(id -u)" != 0 ]; then
  exiterr "Script must be run as root. Try 'sudo sh $0'"
fi

net_iface=${VPN_NET_IFACE:-'eth0'}
def_iface="$(route 2>/dev/null | grep '^default' | grep -o '[^ ]*$')"
[ -z "$def_iface" ] && def_iface="$(ip -4 route list 0/0 2>/dev/null | grep -Po '(?<=dev )(\S+)')"

def_state=$(cat "/sys/class/net/$def_iface/operstate" 2>/dev/null)
if [ -n "$def_state" ] && [ "$def_state" != "down" ]; then
  if ! uname -m | grep -qi '^arm'; then
    case "$def_iface" in
      wl*)
        exiterr "Wireless interface '$def_iface' detected. DO NOT run this script on your PC or Mac!"
        ;;
    esac
  fi
  net_iface="$def_iface"
fi

net_state=$(cat "/sys/class/net/$net_iface/operstate" 2>/dev/null)
if [ -z "$net_state" ] || [ "$net_state" = "down" ] || [ "$net_iface" = "lo" ]; then
  printf "Error: Network interface '%s' is not available.\n" "$net_iface" >&2
  if [ -z "$VPN_NET_IFACE" ]; then
cat 1>&2 <<EOF
Could not detect the default network interface. Re-run this script with:
  sudo VPN_NET_IFACE="default_interface_name" sh "$0"
EOF
  fi
  exit 1
fi

[ -n "$YOUR_IPSEC_PSK" ] && VPN_IPSEC_PSK="$YOUR_IPSEC_PSK"
[ -n "$YOUR_USERNAME" ] && VPN_USER="$YOUR_USERNAME"
[ -n "$YOUR_PASSWORD" ] && VPN_PASSWORD="$YOUR_PASSWORD"

if [ -z "$VPN_IPSEC_PSK" ] && [ -z "$VPN_USER" ] && [ -z "$VPN_PASSWORD" ]; then
  bigecho "VPN credentials not set by user. Generating random PSK and password..."
  VPN_IPSEC_PSK="$(LC_CTYPE=C tr -dc 'A-HJ-NPR-Za-km-z2-9' < /dev/urandom | head -c 16)"
  VPN_USER=vpnuser
  VPN_PASSWORD="$(LC_CTYPE=C tr -dc 'A-HJ-NPR-Za-km-z2-9' < /dev/urandom | head -c 16)"
fi

if [ -z "$VPN_IPSEC_PSK" ] || [ -z "$VPN_USER" ] || [ -z "$VPN_PASSWORD" ]; then
  exiterr "All VPN credentials must be specified. Edit the script and re-enter them."
fi

if printf '%s' "$VPN_IPSEC_PSK $VPN_USER $VPN_PASSWORD" | LC_ALL=C grep -q '[^ -~]\+'; then
  exiterr "VPN credentials must not contain non-ASCII characters."
fi

case "$VPN_IPSEC_PSK $VPN_USER $VPN_PASSWORD" in
  *[\\\"\']*)
    exiterr "VPN credentials must not contain these special characters: \\ \" '"
    ;;
esac

bigecho "VPN setup in progress... Please be patient."

# Create and change to working dir
mkdir -p /opt/src
cd /opt/src || exit 1

count=0
APT_LK=/var/lib/apt/lists/lock
PKG_LK=/var/lib/dpkg/lock
while fuser "$APT_LK" "$PKG_LK" >/dev/null 2>&1 \
  || lsof "$APT_LK" >/dev/null 2>&1 || lsof "$PKG_LK" >/dev/null 2>&1; do
  [ "$count" = "0" ] && bigecho "Waiting for apt to be available..."
  [ "$count" -ge "60" ] && exiterr "Could not get apt/dpkg lock."
  count=$((count+1))
  printf '%s' '.'
  sleep 3
done

bigecho "Populating apt-get cache..."

export DEBIAN_FRONTEND=noninteractive
# apt-get -yq update || exiterr "'apt-get update' failed."

bigecho "Installing packages required for setup..."

apt-get -yq install wget dnsutils openssl \
  iptables iproute2 gawk grep sed net-tools || exiterr2

bigecho "Trying to auto discover IP of this server..."

cat <<'EOF'
In case the script hangs here for more than a few minutes,
press Ctrl-C to abort. Then edit it and manually enter IP.
EOF

# In case auto IP discovery fails, enter server's public IP here.
PUBLIC_IP=${VPN_PUBLIC_IP:-''}

[ -z "$PUBLIC_IP" ] && PUBLIC_IP=$(dig @resolver1.opendns.com -t A -4 myip.opendns.com +short)

check_ip "$PUBLIC_IP" || PUBLIC_IP=$(wget -t 3 -T 15 -qO- http://ipv4.icanhazip.com)
check_ip "$PUBLIC_IP" || exiterr "Cannot detect this server's public IP. Edit the script and manually enter it."

bigecho "Installing packages required for the VPN..."

apt-get -yq install libnss3-dev libnspr4-dev pkg-config \
  libpam0g-dev libcap-ng-dev libcap-ng-utils libselinux1-dev \
  libcurl4-nss-dev flex bison gcc make libnss3-tools \
  libevent-dev ppp xl2tpd || exiterr2

case "$(uname -r)" in
  4.14*|4.15*)
    L2TP_VER=1.3.12
    l2tp_file="xl2tpd-$L2TP_VER.tar.gz"
    l2tp_url1="https://github.com/xelerance/xl2tpd/archive/v$L2TP_VER.tar.gz"
    l2tp_url2="https://mirrors.kernel.org/ubuntu/pool/universe/x/xl2tpd/xl2tpd_$L2TP_VER.orig.tar.gz"
    apt-get -yq install libpcap0.8-dev || exiterr2
    if ! { wget -t 3 -T 30 -nv -O "$l2tp_file" "$l2tp_url1" || wget -t 3 -T 30 -nv -O "$l2tp_file" "$l2tp_url2"; }; then
      exit 1
    fi
    /bin/rm -rf "/opt/src/xl2tpd-$L2TP_VER"
    tar xzf "$l2tp_file" && /bin/rm -f "$l2tp_file"
    cd "xl2tpd-$L2TP_VER" && make -s 2>/dev/null && PREFIX=/usr make -s install
    cd /opt/src || exit 1
    /bin/rm -rf "/opt/src/xl2tpd-$L2TP_VER"
    ;;
esac

bigecho "Installing Fail2Ban to protect SSH..."

apt-get -yq install fail2ban || exiterr2

bigecho "Compiling and installing Libreswan..."

SWAN_VER=3.22
swan_file="libreswan-$SWAN_VER.tar.gz"
swan_url1="https://github.com/libreswan/libreswan/archive/v$SWAN_VER.tar.gz"
swan_url2="https://download.libreswan.org/$swan_file"
if ! { wget -t 3 -T 30 -nv -O "$swan_file" "$swan_url1" || wget -t 3 -T 30 -nv -O "$swan_file" "$swan_url2"; }; then
  exit 1
fi
/bin/rm -rf "/opt/src/libreswan-$SWAN_VER"
tar xzf "$swan_file" && /bin/rm -f "$swan_file"
cd "libreswan-$SWAN_VER" || exit 1
sed -i '/^#define LSWBUF_CANARY/s/-2$/((char) -2)/' include/lswlog.h
cat > Makefile.inc.local <<'EOF'
WERROR_CFLAGS =
USE_DNSSEC = false
EOF
if [ "$(packaging/utils/lswan_detect.sh init)" = "systemd" ]; then
  apt-get -yq install libsystemd-dev || exiterr2
fi
NPROCS="$(grep -c ^processor /proc/cpuinfo)"
[ -z "$NPROCS" ] && NPROCS=1
make "-j$((NPROCS+1))" -s base && make -s install-base

cd /opt/src || exit 1
/bin/rm -rf "/opt/src/libreswan-$SWAN_VER"
if ! /usr/local/sbin/ipsec --version 2>/dev/null | grep -qF "$SWAN_VER"; then
  exiterr "Libreswan $SWAN_VER failed to build."
fi

bigecho "Creating VPN configuration..."

L2TP_NET=${VPN_L2TP_NET:-'192.168.42.0/24'}
L2TP_LOCAL=${VPN_L2TP_LOCAL:-'192.168.42.1'}
L2TP_POOL=${VPN_L2TP_POOL:-'192.168.42.10-192.168.42.250'}
XAUTH_NET=${VPN_XAUTH_NET:-'192.168.43.0/24'}
XAUTH_POOL=${VPN_XAUTH_POOL:-'192.168.43.10-192.168.43.250'}
DNS_SRV1=${VPN_DNS_SRV1:-'202.38.64.56'}
DNS_SRV2=${VPN_DNS_SRV2:-'8.8.4.4'}

# Create IPsec config
conf_bk "/etc/ipsec.conf"
cat > /etc/ipsec.conf <<EOF
version 2.0

config setup
  virtual-private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:!$L2TP_NET,%v4:!$XAUTH_NET
  protostack=netkey
  interfaces=%defaultroute
  uniqueids=no

conn shared
  left=%defaultroute
  leftid=$PUBLIC_IP
  right=%any
  encapsulation=yes
  authby=secret
  pfs=no
  rekey=no
  keyingtries=5
  dpddelay=30
  dpdtimeout=120
  dpdaction=clear
  ike=3des-sha1,3des-sha2,aes-sha1,aes-sha1;modp1024,aes-sha2,aes-sha2;modp1024
  phase2alg=3des-sha1,3des-sha2,aes-sha1,aes-sha2,aes256-sha2_512
  sha2-truncbug=yes

conn l2tp-psk
  auto=add
  leftprotoport=17/1701
  rightprotoport=17/%any
  type=transport
  phase2=esp
  also=shared

conn xauth-psk
  auto=add
  leftsubnet=0.0.0.0/0
  rightaddresspool=$XAUTH_POOL
  modecfgdns1=$DNS_SRV1
  modecfgdns2=$DNS_SRV2
  leftxauthserver=yes
  rightxauthclient=yes
  leftmodecfgserver=yes
  rightmodecfgclient=yes
  modecfgpull=yes
  xauthby=file
  ike-frag=yes
  ikev2=never
  cisco-unity=yes
  also=shared
EOF

if ip -4 route list 0/0 2>/dev/null | grep -qs ' src '; then
  PRIVATE_IP=$(ip -4 route get 1 | sed 's/ uid .*//' | awk '{print $NF;exit}')
  check_ip "$PRIVATE_IP" && sed -i "s/left=%defaultroute/left=$PRIVATE_IP/" /etc/ipsec.conf
fi

if uname -m | grep -qi '^arm'; then
  sed -i '/phase2alg/s/,aes256-sha2_512//' /etc/ipsec.conf
fi

# Specify IPsec PSK
conf_bk "/etc/ipsec.secrets"
cat > /etc/ipsec.secrets <<EOF
%any  %any  : PSK "$VPN_IPSEC_PSK"
EOF

# Create xl2tpd config
conf_bk "/etc/xl2tpd/xl2tpd.conf"
cat > /etc/xl2tpd/xl2tpd.conf <<EOF
[global]
port = 1701

[lns default]
ip range = $L2TP_POOL
local ip = $L2TP_LOCAL
require chap = yes
refuse pap = yes
require authentication = yes
name = l2tpd
pppoptfile = /etc/ppp/options.xl2tpd
length bit = yes
EOF

# Set xl2tpd options
conf_bk "/etc/ppp/options.xl2tpd"
cat > /etc/ppp/options.xl2tpd <<EOF
+mschap-v2
ipcp-accept-local
ipcp-accept-remote
ms-dns $DNS_SRV1
ms-dns $DNS_SRV2
noccp
auth
mtu 1280
mru 1280
proxyarp
lcp-echo-failure 4
lcp-echo-interval 30
connect-delay 5000
EOF

# Create VPN credentials
conf_bk "/etc/ppp/chap-secrets"
cat > /etc/ppp/chap-secrets <<EOF
"$VPN_USER" l2tpd "$VPN_PASSWORD" *
EOF

conf_bk "/etc/ipsec.d/passwd"
VPN_PASSWORD_ENC=$(openssl passwd -1 "$VPN_PASSWORD")
cat > /etc/ipsec.d/passwd <<EOF
$VPN_USER:$VPN_PASSWORD_ENC:xauth-psk
EOF

bigecho "Updating sysctl settings..."

if ! grep -qs "hwdsl2 VPN script" /etc/sysctl.conf; then
  conf_bk "/etc/sysctl.conf"
  if [ "$(getconf LONG_BIT)" = "64" ]; then
    SHM_MAX=68719476736
    SHM_ALL=4294967296
  else
    SHM_MAX=4294967295
    SHM_ALL=268435456
  fi
cat >> /etc/sysctl.conf <<EOF

# Added by hwdsl2 VPN script
kernel.msgmnb = 65536
kernel.msgmax = 65536
kernel.shmmax = $SHM_MAX
kernel.shmall = $SHM_ALL

net.ipv4.ip_forward = 1
net.ipv4.conf.all.accept_source_route = 0
net.ipv4.conf.all.accept_redirects = 0
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.all.rp_filter = 0
net.ipv4.conf.default.accept_source_route = 0
net.ipv4.conf.default.accept_redirects = 0
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.default.rp_filter = 0
net.ipv4.conf.$net_iface.send_redirects = 0
net.ipv4.conf.$net_iface.rp_filter = 0

net.core.wmem_max = 12582912
net.core.rmem_max = 12582912
net.ipv4.tcp_rmem = 10240 87380 12582912
net.ipv4.tcp_wmem = 10240 87380 12582912
EOF
fi

bigecho "Updating IPTables rules..."

# Check if rules need updating
ipt_flag=0
IPT_FILE="/etc/iptables.rules"
if ! grep -qs "hwdsl2 VPN script" "$IPT_FILE" \
   || ! iptables -t nat -C POSTROUTING -s "$L2TP_NET" -o "$net_iface" -j MASQUERADE 2>/dev/null \
   || ! iptables -t nat -C POSTROUTING -s "$XAUTH_NET" -o "$net_iface" -m policy --dir out --pol none -j MASQUERADE 2>/dev/null; then
  ipt_flag=1
fi

# Add IPTables rules for VPN
if [ "$ipt_flag" = "1" ]; then
  service fail2ban stop >/dev/null 2>&1
  iptables-save > "$IPT_FILE.old-$SYS_DT"
  iptables -I INPUT 1 -p udp --dport 1701 -m policy --dir in --pol none -j DROP
  iptables -I INPUT 2 -m conntrack --ctstate INVALID -j DROP
  iptables -I INPUT 3 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
  iptables -I INPUT 4 -p udp -m multiport --dports 500,4500 -j ACCEPT
  iptables -I INPUT 5 -p udp --dport 1701 -m policy --dir in --pol ipsec -j ACCEPT
  iptables -I INPUT 6 -p udp --dport 1701 -j DROP
  iptables -I FORWARD 1 -m conntrack --ctstate INVALID -j DROP
  iptables -I FORWARD 2 -i "$net_iface" -o ppp+ -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
  iptables -I FORWARD 3 -i ppp+ -o "$net_iface" -j ACCEPT
  iptables -I FORWARD 4 -i ppp+ -o ppp+ -s "$L2TP_NET" -d "$L2TP_NET" -j ACCEPT
  iptables -I FORWARD 5 -i "$net_iface" -d "$XAUTH_NET" -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
  iptables -I FORWARD 6 -s "$XAUTH_NET" -o "$net_iface" -j ACCEPT
  # Uncomment if you wish to disallow traffic between VPN clients themselves
  # iptables -I FORWARD 2 -i ppp+ -o ppp+ -s "$L2TP_NET" -d "$L2TP_NET" -j DROP
  # iptables -I FORWARD 3 -s "$XAUTH_NET" -d "$XAUTH_NET" -j DROP
  iptables -A FORWARD -j DROP
  iptables -t nat -I POSTROUTING -s "$XAUTH_NET" -o "$net_iface" -m policy --dir out --pol none -j MASQUERADE
  iptables -t nat -I POSTROUTING -s "$L2TP_NET" -o "$net_iface" -j MASQUERADE
  echo "# Modified by hwdsl2 VPN script" > "$IPT_FILE"
  iptables-save >> "$IPT_FILE"

  IPT_FILE2="/etc/iptables/rules.v4"
  if [ -f "$IPT_FILE2" ]; then
    conf_bk "$IPT_FILE2"
    /bin/cp -f "$IPT_FILE" "$IPT_FILE2"
  fi
fi

bigecho "Enabling services on boot..."

mkdir -p /etc/network/if-pre-up.d
cat > /etc/network/if-pre-up.d/iptablesload <<'EOF'
#!/bin/sh
iptables-restore < /etc/iptables.rules
exit 0
EOF

for svc in fail2ban ipsec xl2tpd; do
  update-rc.d "$svc" enable >/dev/null 2>&1
  systemctl enable "$svc" 2>/dev/null
done
if ! grep -qs "hwdsl2 VPN script" /etc/rc.local; then
  if [ -f /etc/rc.local ]; then
    conf_bk "/etc/rc.local"
    sed --follow-symlinks -i '/^exit 0/d' /etc/rc.local
  else
    echo '#!/bin/sh' > /etc/rc.local
  fi
cat >> /etc/rc.local <<'EOF'

# Added by hwdsl2 VPN script
(sleep 15
service ipsec restart
service xl2tpd restart
[ -f "/usr/sbin/netplan" ] && { iptables-restore < /etc/iptables.rules; service fail2ban restart; }
echo 1 > /proc/sys/net/ipv4/ip_forward)&
exit 0
EOF
fi

bigecho "Starting services..."

# Reload sysctl.conf
sysctl -e -q -p

# Update file attributes
chmod +x /etc/rc.local /etc/network/if-pre-up.d/iptablesload
chmod 600 /etc/ipsec.secrets* /etc/ppp/chap-secrets* /etc/ipsec.d/passwd*

# Apply new IPTables rules
iptables-restore < "$IPT_FILE"

# Restart services
mkdir -p /run/pluto
service fail2ban restart 2>/dev/null
service ipsec restart 2>/dev/null
service xl2tpd restart 2>/dev/null

cat <<EOF

================================================

IPsec VPN server is now ready for use!

Connect to your new VPN with these details:

Server IP: $PUBLIC_IP
IPsec PSK: $VPN_IPSEC_PSK
Username: $VPN_USER
Password: $VPN_PASSWORD

Write these down. You'll need them to connect!

Important notes:   https://git.io/vpnnotes
Setup VPN clients: https://git.io/vpnclients

================================================

EOF

}

## Defer setup until we have the complete script
vpnsetup "$@"

exit 0

PPTP

# 安装 PPTP VPN 服务
sudo apt-get install pptpd

# 添加VPN账号
sudo vi /etc/ppp/chap-secrets
# 格式如下
# 用户名 pptpd 密码 *

# 配置pptpd.conf
sudo vi /etc/pptpd.conf
#找到并去掉以下代码的#号如下图所示
#localip  192.168.0.1
#remoteip 192.168.0.234-238,192.168.0.245

# 配置vpn的ms-dns
sudo vi /etc/ppp/pptpd-options 
#找到ms-dns并去掉#号，修改为8.8.8.8和8.8.4.4如下图所示
#ms-dns 8.8.8.8
#ms-dns 8.8.4.4

# 开启内核IP转发
sudo vi /etc/sysctl.conf
#找到以下代码，并去掉#号，如下图所示
#net.ipv4.ip_forward=1

# 输入命令配置生效
sudo sysctl -p

# 清除iptables里旧的规则 # 因为已经安装IPSec，不必再进行此操作。
# sudo iptables -F
# sudo iptables -X
# sudo iptables -t nat -F
# sudo iptables -t nat -X

# 允许gre协议以及1723端口、47端口
sudo iptables -A INPUT -p gre -j ACCEPT 
sudo iptables -A INPUT -p tcp --dport 1723 -j ACCEPT 
sudo iptables -A INPUT -p tcp --dport 47 -j ACCEPT 

# 开启NAT转发
sudo iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -o eno3 -j MASQUERADE
#注意填写ens3，不同机器是不一样的，可以在终端输入ifconfig来查看网卡联网以及网卡的名称

# 重启服务，快去试试连接VPN吧
sudo service pptpd restart
# VPN代理上网慢请输入以下命令尝试解决
sudo /sbin/iptables -I FORWARD -p tcp --syn -i ppp+ -j TCPMSS --set-mss 1356
sudo service pptpd restart
上一篇下一篇

猜你喜欢

热点阅读